Journal of Mechanical Engineering

2019, Volume 55 Issue 6 Publication:20 March 2019
Previous Issue Next Issue
Design of Undermatching T Joints Based on the Thought of Equal Load Carrying Capacity
GUO Junli, DONG Zhibo, LIU Xuesong, WANG Ping, FANG Hongyuan
机械工程学报. 2019, 55 (6): 1-10. doi: 10.3901/JME.2019.06.001
Abstract ( 434 )    PDF(8362KB) ( 334 )
References | Related Articles | Metrics
A Comparative Study on Computational Accuracy and Efficiency of Welding Residual Stress and Deformation in a Q390 Steel Thick Plate T Joint among Three Kinds of Different FEM Software
LU Shijie, ZHENG Qiao, ZHANG Chaohua, WANG Yifeng, DENG Dean
机械工程学报. 2019, 55 (6): 11-22. doi: 10.3901/JME.2019.06.011
Abstract ( 725 )    PDF(188174KB) ( 574 )
References | Related Articles | Metrics
Effect of Welding Energy on Microstructure and Mechanical Properties of Mg/Al Joints Welded by Ultrasonic Spot Welding
GU Xiaoyan, LIU Jing, LIU Dongfeng, SUN Daqian, LI Donglai
机械工程学报. 2019, 55 (6): 23-31. doi: 10.3901/JME.2019.06.023
Abstract ( 697 )    PDF(70024KB) ( 514 )
References | Related Articles | Metrics
Fatigue Design of Welded Structure Based on the Non-linear Cumulative Damage Theory
XUE Qiwen, DU Xiuyun
机械工程学报. 2019, 55 (6): 32-38. doi: 10.3901/JME.2019.06.032
Abstract ( 549 )    PDF(2332KB) ( 556 )
References | Related Articles | Metrics
Research on Microstructure and Mechanical Properties of Friction Stir Lap Welded Aluminum/Brass Dissimilar Joint
YU Mingrun, ZHAO Hongyun, JIANG Zhihua, ZHOU Li, HUANG Yongxian, SONG Xiaoguo
机械工程学报. 2019, 55 (6): 39-45. doi: 10.3901/JME.2019.06.039
Abstract ( 642 )    PDF(83101KB) ( 512 )
References | Related Articles | Metrics
Influence of Deposition Sequence and Thickness of Tube on Welding Residual Stress and Deformation in Dissimilar Steel Tube-block Welded Joint
ZHENG Qiao, LU Shijie, LI Suo, LIN Xudong, WANG Yifeng, DENG Dean
机械工程学报. 2019, 55 (6): 46-53. doi: 10.3901/JME.2019.06.046
Abstract ( 752 )    PDF(49502KB) ( 487 )
References | Related Articles | Metrics
Multi-scale Finite Element Analysis into Fatigue Lives of Various Component Solder Joints on Printed Circuit Board
LI Yue, TIAN Yanhong, CONG Sen, ZHANG Weiwei
机械工程学报. 2019, 55 (6): 54-60. doi: 10.3901/JME.2019.06.054
Abstract ( 740 )    PDF(56465KB) ( 618 )
References | Related Articles | Metrics
Triaxial Stresses in TC4 Ti-alloy Weldments by Magnetically Controlled Narrow Gap TIG Welding before and after PWHT
YU Chen, CHEN Jing, CHEN Huaining, ZHANG Yupeng, FANG Weiping
机械工程学报. 2019, 55 (6): 61-66. doi: 10.3901/JME.2019.06.061
Abstract ( 412 )    PDF(17725KB) ( 542 )
References | Related Articles | Metrics
Control of Welding Distortion by Welding with Trailing Cooling of Drikold of 1561 Aluminum Alloy Thin Sheet
YAN Dejun, WANG Sai, ZHENG Wenjian, YU Yang, XIE Hao, ZHONG Meida, ZOU Xiaofeng, YANG Jianguo
机械工程学报. 2019, 55 (6): 67-73. doi: 10.3901/JME.2019.06.067
Abstract ( 633 )    PDF(54606KB) ( 569 )
References | Related Articles | Metrics
Quantitative Detection of Lamination Defect in Beams Based on Space-frequency-wavenumber Method
HE Cunfu, LI Ziming, LIU Zenghua, FENG Xuejian, REN Jie, WU Bin
机械工程学报. 2019, 55 (6): 74-82. doi: 10.3901/JME.2019.06.074
Abstract ( 395 )    PDF(79939KB) ( 546 )
References | Related Articles | Metrics
State Degradation Trend Prediction Based on Double Hidden Layer Quantum Circuit Recurrent Unit Neural Network
LI Feng, XIANG Wang, CHEN Yong, TANG Baoping, WANG Jiaxu
机械工程学报. 2019, 55 (6): 83-92. doi: 10.3901/JME.2019.06.083
Abstract ( 646 )    PDF(17272KB) ( 365 )
References | Related Articles | Metrics
Experimental Study on Sensing the Internal Temperature Distributions of Structures by Electromagnetic Ultrasonic
WEI Dong, SHI Youan, HU Bin, SHOU Binan, GUI Yewei
机械工程学报. 2019, 55 (6): 93-99. doi: 10.3901/JME.2019.06.093
Abstract ( 731 )    PDF(16293KB) ( 435 )
References | Related Articles | Metrics
Simulation and Experimental Study on Temperature Characteristics of Magnetorheological Fluid Brake for Vehicles
WANG Daoming, YAO Lan, SHAO Wenbin, ZI Bin, CHEN Wuwei
机械工程学报. 2019, 55 (6): 100-107. doi: 10.3901/JME.2019.06.100
Abstract ( 623 )    PDF(59790KB) ( 491 )
References | Related Articles | Metrics
Statistics Characters of Wheel/Rail Loads of Intercity EMU
DING Ran, LI Qiang, REN Zunsong
机械工程学报. 2019, 55 (6): 108-115. doi: 10.3901/JME.2019.06.108
Abstract ( 585 )    PDF(19727KB) ( 203 )
References | Related Articles | Metrics
Influence of Kinetic Parameters on Vehicle Twist Test of Exported Train
DUAN Liang, SONG Chunyuan, LIU Chuang, WU Jinxian
机械工程学报. 2019, 55 (6): 116-121. doi: 10.3901/JME.2019.06.116
Abstract ( 498 )    PDF(14802KB) ( 209 )
References | Related Articles | Metrics
Crack Mechanism and Field Test of the Metro Safety Hanger
SHI Huailong, WANG Jianbin, DAI Huanyun, WU Pingbo
机械工程学报. 2019, 55 (6): 122-128. doi: 10.3901/JME.2019.06.122
Abstract ( 607 )    PDF(30502KB) ( 628 )
References | Related Articles | Metrics
Numerical Methods of Glass Fiber Reinforced PMH Structure Based on Parameter Mapping
NIE Xin, LEI Fagui, ZHU Guohua, WANG Dongdong, XIONG Dongjian
机械工程学报. 2019, 55 (6): 129-137. doi: 10.3901/JME.2019.06.129
Abstract ( 615 )    PDF(59999KB) ( 391 )
References | Related Articles | Metrics
Time Optimal Trajectory Planning of Elevating Fire Truck Based on Convex Optimization
TENG Rumin, LI Yuxin, WANG Xin, ZHAO Zhe
机械工程学报. 2019, 55 (6): 138-144. doi: 10.3901/JME.2019.06.138
Abstract ( 513 )    PDF(11765KB) ( 482 )
References | Related Articles | Metrics
Multi-factor Coupled Heat Transfer Model with Multi-layer and Dynamic Heat Transfer Characteristics in Vehicle Cabin
DENG Zhiyong, LAN Fengchong, CHEN Jiqing, ZHANG Xiaodong
机械工程学报. 2019, 55 (6): 145-155. doi: 10.3901/JME.2019.06.145
Abstract ( 419 )    PDF(43324KB) ( 541 )
References | Related Articles | Metrics
State Estimation of Distributed Drive Electric Vehicle Based on Adaptive Extended Kalman Filter
ZHANG Zhiyong, ZHANG Shuzhi, HUANG Caixia, ZHANG Liuzhu, LI Bohao
机械工程学报. 2019, 55 (6): 156-165. doi: 10.3901/JME.2019.06.156
Abstract ( 843 )    PDF(18582KB) ( 639 )
References | Related Articles | Metrics
Design and Optimization of Ethernet AVB Network for Intelligent Vehicle
WANG Yuefei, HUANG Bin, WU Yuan, GUO Zhongfei
机械工程学报. 2019, 55 (6): 166-177. doi: 10.3901/JME.2019.06.166
Abstract ( 530 )    PDF(19722KB) ( 414 )
References | Related Articles | Metrics
Design Method and Performance Analysis of CCHP Driven by Solar Energy and Based on Organic Rankine Cycle
MA Minglu, DENG Shuai, ZHAO Li, LIN Shan, ZHANG Ying, NI Jiaxin, SU Wen
机械工程学报. 2019, 55 (6): 178-185. doi: 10.3901/JME.2019.06.178
Abstract ( 424 )    PDF(12870KB) ( 351 )
References | Related Articles | Metrics
Fabrication and Capillary Performance of Micro-grooved Wicks for Aluminium Flat-plate Heat Pipes
TANG Heng, TANG Yong, WAN Zhenping, LU Longsheng, WU Xiaoyu, LU Yanjun
机械工程学报. 2019, 55 (6): 186-193. doi: 10.3901/JME.2019.06.186
Abstract ( 452 )    PDF(64105KB) ( 730 )
References | Related Articles | Metrics
Variable Frequency Room Air Conditioner Operation Pattern Recognition and Data Mining
LIANG Zhihao, WU Jianghong, XIE Zili
机械工程学报. 2019, 55 (6): 194-202. doi: 10.3901/JME.2019.06.194
Abstract ( 434 )    PDF(20036KB) ( 419 )
References | Related Articles | Metrics
Dynamic Decoupling and Simulation Research on Control System of New Servo Cylinder of Rolling Cutter Servo Cylinder
MA Linan, ZHAO Xiaodong, MA Lifeng, MA Qiangjun, HAN Heyong
机械工程学报. 2019, 55 (6): 203-212. doi: 10.3901/JME.2019.06.203
Abstract ( 622 )    PDF(30156KB) ( 432 )
References | Related Articles | Metrics
Multi-source Design Change Propagation Path Optimization for Complex Product Based on Weighted and Directed Network Model
LI Yupeng, LI Mengze, WANG Zhaotong
机械工程学报. 2019, 55 (6): 213-222. doi: 10.3901/JME.2019.06.213
Abstract ( 702 )    PDF(26822KB) ( 477 )
References | Related Articles | Metrics
Self-adaptive Multistage GA-IWO for Solving Flexible Job Shop Scheduling Problem
SHI Xiaoqiu, LI Yanyan, DENG Dingshan, LONG Wei
机械工程学报. 2019, 55 (6): 223-232. doi: 10.3901/JME.2019.06.223
Abstract ( 644 )    PDF(2542KB) ( 378 )
References | Related Articles | Metrics