Journal of Mechanical Engineering

2017, Volume 53 Issue 5 Publication:05 March 2017
Previous Issue Next Issue
The Statue and Difficult Problems of Research on Energy Efficiency of Manufacturing Systems
LIU Fei, LIU Peiji, LI Congbo, TUO Junbo, CAI Wei
机械工程学报. 2017, 53 (5): 1-11. doi: 10.3901/JME.2017.05.001
Abstract ( 806 )    PDF(525KB) ( 653 )
Related Articles | Metrics
A Batch Splitting Flexible Job Shop Scheduling Model for Energy Saving under Alternative Process Plans

LI Congbo, SHEN Huan, LI Lingling, YI Qian
Journal of Mechanical Engineering. 2017, 53 (5): 12-23. doi: 10.3901/JME.2017.05.012
Abstract ( 839 )    PDF(502KB) ( 554 )
Related Articles | Metrics
Integrated Optimization of Cutting Parameters and Scheduling for Reducing Carbon Emissions
LIU Qiong, ZHOU Yingdong, ZHANG Yi
机械工程学报. 2017, 53 (5): 24-33. doi: 10.3901/JME.2017.05.024
Abstract ( 760 )    PDF(503KB) ( 815 )
Related Articles | Metrics
Disassembly Program Evaluation Research Based on Fuzzy AHP， Grey Correlation and TOPSIS Combined Approach
TIAN Guangdong, ZHANG Honghao, WANG Danqi
机械工程学报. 2017, 53 (5): 34-40. doi: 10.3901/JME.2017.05.034
Abstract ( 722 )    PDF(408KB) ( 417 )
Related Articles | Metrics
Study of Fatigue Defect Critical Threshold of Remanufacturing Cores and Judgment of Re-manufacturability Based on Fatigue Defect
WANG Jinlong, ZHANG Yuanliang, ZHAO Qingchen, ZHANG Hongchao
机械工程学报. 2017, 53 (5): 41-49. doi: 10.3901/JME.2017.05.041
Abstract ( 658 )    PDF(552KB) ( 433 )
Related Articles | Metrics
Carbon Emissions Quantitative Methodology of Product Fused Deposition Manufacturing
ZHANG Lei, ZHANG Beikun, BAO Hong, ZHANG Cheng, ZHANG Weiwei
机械工程学报. 2017, 53 (5): 50-59. doi: 10.3901/JME.2017.05.050
Abstract ( 662 )    PDF(1825KB) ( 337 )
Related Articles | Metrics
Research on Selective Assembly Method Optimization for Construction
Machinery Remanufacturing Based on Ant Colony Algorithm
SU Biao, HUANG Xiangming, REN Yinghui, WANG Fulin, XIAO He, ZHENG Bo
机械工程学报. 2017, 53 (5): 60-68. doi: 10.3901/JME.2017.05.060
Abstract ( 836 )    PDF(530KB) ( 768 )
Related Articles | Metrics
The Research on Formation Mechanism of Carbon Deposition in Remanufacturing Engines
WANG Xing, JIA Xiujie, LI Fangyi, YANG Mingbin, ZHANG Jian, SUN Yihang
机械工程学报. 2017, 53 (5): 69-75. doi: 10.3901/JME.2017.05.069
Abstract ( 587 )    PDF(2450KB) ( 341 )
Related Articles | Metrics
Multi-objective Optimization Model and Application of Components Reuse Combination for Used Mechanical Equipment
XUE Chen, JIANG Zhigang, ZHANG Xugang, WANG Han
机械工程学报. 2017, 53 (5): 76-85. doi: 10.3901/JME.2017.05.076
Abstract ( 810 )    PDF(481KB) ( 429 )
Related Articles | Metrics
Effect of Contact Wheel’s Deformation on Cutting Depth for Robotic Belt Grinding
LIU Fei, WANG Wei, WANG Lei, WANG Gang, YUN Chao
机械工程学报. 2017, 53 (5): 86-92. doi: 10.3901/JME.2017.05.086
Abstract ( 856 )    PDF(1163KB) ( 510 )
Related Articles | Metrics
Obstacle Avoidance Trajectory Planning for Gaussian Motion of Robot Based on Probability Theory
QI Ruolong, ZHOU Weijia, LIU Jinguo, ZHANG Wei, XIAO Lei
机械工程学报. 2017, 53 (5): 93-100. doi: 10.3901/JME.2017.05.093
Abstract ( 754 )    PDF(5068KB) ( 638 )
Related Articles | Metrics
Determination and Synthesis of Translational Parallel Mechanism with Constant Jacobian Matrix
ZHAO Yanzhi, CAO Yachao, LIANG Bowen, ZHAO Tieshi
机械工程学报. 2017, 53 (5): 101-107. doi: 10.3901/JME.2017.05.101
Abstract ( 807 )    PDF(510KB) ( 449 )
Related Articles | Metrics
Kinematics Performance Evaluation of a 3-SPR Parallel Manipulator
WANG Manxin, LIU Haitao, HUANG Tian
机械工程学报. 2017, 53 (5): 108-115. doi: 10.3901/JME.2017.05.108
Abstract ( 823 )    PDF(1501KB) ( 534 )
Related Articles | Metrics
Influence of Surface Topography Characteristics on
Mode Coupling Instability System
LI Xiaopeng, PAN Wujiu, GAO Jianzhuo, LI Shujun, WEN Bangchun
机械工程学报. 2017, 53 (5): 116-127. doi: 10.3901/JME.2017.05.116
Abstract ( 602 )    PDF(9799KB) ( 505 )
Related Articles | Metrics
Dynamical Characteristics of Sandwich-type Piezoelectric Actuator for Driving Track
WANG Liang, SHU Chengyou, JIN Jiamei, ZHANG Jianhui
机械工程学报. 2017, 53 (5): 128-135. doi: 10.3901/JME.2017.05.128
Abstract ( 765 )    PDF(5192KB) ( 353 )
Related Articles | Metrics
Quasi-static-model-based Wear Analysis of Spur Gears
ZHANG Jun, BIAN Shiyuan, LU Qing, LIU Xianzeng
机械工程学报. 2017, 53 (5): 136-145. doi: 10.3901/JME.2017.05.136
Abstract ( 815 )    PDF(1379KB) ( 471 )
Related Articles | Metrics
Influence of the Distribution of Porous Media on the Heat Conduction Enhancement and Isothermal Performance for Isothermal Chamber
YANG Lihong, SHEN Hangming, YE Qian, LIU Chengliang
机械工程学报. 2017, 53 (5): 146-152. doi: 10.3901/JME.2017.05.146
Abstract ( 546 )    PDF(1413KB) ( 240 )
Related Articles | Metrics
ANSYS Interference Fit Analysis of Mechanical Seals in
Reactor Coolant Pumps
WANG Yuechang, LIU Ying, HUANG Weifeng, GAO Zhi, WANG Yuming
机械工程学报. 2017, 53 (5): 153-159. doi: 10.3901/JME.2017.05.153
Abstract ( 980 )    PDF(2066KB) ( 488 )
Related Articles | Metrics
Multiscale Computation Method for Conformal Contacted Rough Surface Lubrication Problem
PEI Shiyuan, WANG Pengfei, XU Hua
机械工程学报. 2017, 53 (5): 160-166. doi: 10.3901/JME.2017.05.160
Abstract ( 648 )    PDF(1632KB) ( 465 )
Related Articles | Metrics
Design and Wettability Control of Hydrophobic/superhydrophobic Surfaces Based on the Extendable Micro-rib
LI Xiaolei, ZHANG Lei, MA Xiaowen, ZHANG Huichen
机械工程学报. 2017, 53 (5): 167-174. doi: 10.3901/JME.2017.05.167
Abstract ( 766 )    PDF(1701KB) ( 332 )
Related Articles | Metrics
Microstructure Design for 3D Printed Metal Prosthesis of Adjustable Modulus
KANG Jianfeng, WANG Ling, SUN Changning, LI Dichen, JIN Zhongmin
机械工程学报. 2017, 53 (5): 175-180. doi: 10.3901/JME.2017.05.175
Abstract ( 1067 )    PDF(1568KB) ( 663 )
Related Articles | Metrics
Progress and Application of Key Technologies on the Electronic Packaging Equipment Development
CHEN Xin, JIANG Yongjun, TAN Yutao, GAO Jian, YANG Zhijun, LIU Guanfeng, HE Yunbo, WANG Han, LI Zexiang
机械工程学报. 2017, 53 (5): 181-189. doi: 10.3901/JME.2017.05.181
Abstract ( 1040 )    PDF(2791KB) ( 731 )
Related Articles | Metrics
Optimization of Milling Parameters under Constrain of Process Stability
HU Ruifei, YIN Ming, LIU Yan, SU Zhenwei, YIN Guofu
机械工程学报. 2017, 53 (5): 190-198. doi: 10.3901/JME.2017.05.190
Abstract ( 872 )    PDF(1374KB) ( 776 )
Related Articles | Metrics
Accuracy Control of Ballig of Crankshaft Journals in Grinding Process Based on Cutting Depth Model
LI Jing, GAO Huayu, SHEN Nanyan, HUANG Haitao, FANG Minglun
机械工程学报. 2017, 53 (5): 199-212. doi: 10.3901/JME.2017.05.199
Abstract ( 857 )    PDF(1072KB) ( 456 )
Related Articles | Metrics