Journal of Mechanical Engineering

2018, Volume 54 Issue 22 Publication:20 November 2018
Previous Issue Next Issue
Research and Application of Electromechanical Equipment Remanufacturing Engineering in Service Theory
WANG Qingfeng, GAO Jinji, LI Zhong, LEI Xingguo
机械工程学报. 2018, 54 (22): 1-7. doi: 10.3901/JME.2018.22.001
Abstract ( 680 )    PDF(287KB) ( 495 )
References | Related Articles | Metrics
Wireless Monitoring Technology of Rolling Bearing Inner Ring Temperature
WANG Fangzhe, ZHU Yongsheng, YAN Ke, LIU Yuwei, HONG Jun
机械工程学报. 2018, 54 (22): 8-14. doi: 10.3901/JME.2018.22.008
Abstract ( 763 )    PDF(435KB) ( 361 )
References | Related Articles | Metrics
Suppressionof Dead Zone in TOFD with Autoregressive#br# Spectral Extrapolation
SUN Xu, JIN Shijie, ZHANG Donghui, LIU Lili, YANG Huimin, LIN Li
机械工程学报. 2018, 54 (22): 15-20. doi: 10.3901/JME.2018.22.015
Abstract ( 534 )    PDF(301KB) ( 205 )
References | Related Articles | Metrics
On-line Fault Diagnosis of High Temperature Ceramic Filter Fracture Based on Dynamic Pressure
LIU Longfei, JI Zhongli, LUAN Xin
机械工程学报. 2018, 54 (22): 21-29. doi: 10.3901/JME.2018.22.021
Abstract ( 492 )    PDF(402KB) ( 246 )
References | Related Articles | Metrics
Intelligent Diagnosis Method of Diesel Engine based on Fast Online Support Tensor Machine
XU Xiaowei, ZHANG Nan, YAN Yunbing, QIN Li
机械工程学报. 2018, 54 (22): 30-37. doi: 10.3901/JME.2018.22.030
Abstract ( 544 )    PDF(350KB) ( 266 )
References | Related Articles | Metrics
Helical Mode Guided Waves in Pipe Observed by Electromagnetic Acoustic Transducer Array
ZHOU Jingjie, ZHENG Yang, ZHANG Zongjian, TAN Jidong
机械工程学报. 2018, 54 (22): 38-46. doi: 10.3901/JME.2018.22.038
Abstract ( 833 )    PDF(696KB) ( 395 )
References | Related Articles | Metrics
Process and Experimental Research of Controllable Pneumatic Rotary Bending Cropping of 304 Stainless Steel Bar
ZHONG Bin, LI Xuewu, YU Zhengyang, ZHANG Chuanwei
机械工程学报. 2018, 54 (22): 47-54. doi: 10.3901/JME.2018.22.047
Abstract ( 536 )    PDF(390KB) ( 325 )
References | Related Articles | Metrics
Surface Flow Behavior of Laser-arc Hybrid Welding Pool of High Nitrogen Steel
LIU Jia, BAI Chenming, SHI Yan, LI Zhong, ZHANG Hong
机械工程学报. 2018, 54 (22): 55-62. doi: 10.3901/JME.2018.22.055
Abstract ( 554 )    PDF(522KB) ( 275 )
References | Related Articles | Metrics
NEIM Based Modeling and Simulation Study of Innovative Ti-(SiC_f/Al₃Ti) Laminated Composites at the Early Stage of Penetration Process
LIU Jingchuan, JIANG Fengchun, WANG Liquan, ZHANG Mengqi, YUN Feihong
机械工程学报. 2018, 54 (22): 63-77. doi: 10.3901/JME.2018.22.063
Abstract ( 535 )    PDF(820KB) ( 322 )
References | Related Articles | Metrics
Modified Johnson-Cook Constitutive Model of Aerial Aluminum Alloy 7050-T7415 Considering the Forming Direction Effect
MENG Ying, FU Xiuli, PAN Yongzhi, XU Nianwei
机械工程学报. 2018, 54 (22): 78-85. doi: 10.3901/JME.2018.22.078
Abstract ( 1227 )    PDF(459KB) ( 306 )
References | Related Articles | Metrics
Simulation of Grain Growth in Single-pass Two-layer Deposition of Arc Welding Based Additive Forming Process
ZHOU Xiangman, TIAN Qihua, DU Yixian, BAI Xingwang, ZHANG Haiou
机械工程学报. 2018, 54 (22): 86-94. doi: 10.3901/JME.2018.22.086
Abstract ( 612 )    PDF(664KB) ( 234 )
References | Related Articles | Metrics
Hot-assisted Ultrasonic Additive Manufacturing Method for Al/Cu Layer-metal Composites
WANG Bo, ZHANG Hongtao, ZHU Xunming, WANG Yunfeng, JIN Wei, HE Peng
机械工程学报. 2018, 54 (22): 95-102. doi: 10.3901/JME.2018.22.095
Abstract ( 557 )    PDF(519KB) ( 371 )
References | Related Articles | Metrics
Active Fault-tolerant Control of EPS Considering Sensor and Actuator Fault
GAO Zhengang, CHEN Wuwei, TAN Dongkui, WANG Hongbo, YANG Liuqing
机械工程学报. 2018, 54 (22): 103-113. doi: 10.3901/JME.2018.22.103
Abstract ( 691 )    PDF(526KB) ( 251 )
References | Related Articles | Metrics
Modeling and Simulation of Vibration Absorber for the Carbody Utilizing Magnetorheological Elastomers
WEN Yongpeng, SUN Qian, ZHOU Weihao, SHANG Huilin, GUO Linsheng
机械工程学报. 2018, 54 (22): 114-127. doi: 10.3901/JME.2018.22.114
Abstract ( 565 )    PDF(689KB) ( 244 )
References | Related Articles | Metrics
Analysis of Nonlinear Torsional Vibration Characteristics of EV Powertrain Considering Rotor Eccentricity of PMSM
HU Donghai, YAN Yanzhi
机械工程学报. 2018, 54 (22): 128-136. doi: 10.3901/JME.2018.22.128
Abstract ( 690 )    PDF(386KB) ( 299 )
References | Related Articles | Metrics
Study on Flow Loss Characteristics of Side Channel Pump Based on Entropy Production
ZHANG Fan, YUAN Shouqi, WEI Xueyuan, CHEN Ke
机械工程学报. 2018, 54 (22): 137-144. doi: 10.3901/JME.2018.22.137
Abstract ( 587 )    PDF(498KB) ( 341 )
References | Related Articles | Metrics
Dynamics Modeling and Analysis of the Inflatable Net System for Space Capture
LIU Hao, WEI Cheng, TIAN Jian, TAN Chunlin, ZHAO Yang
机械工程学报. 2018, 54 (22): 145-152. doi: 10.3901/JME.2018.22.145
Abstract ( 598 )    PDF(385KB) ( 228 )
References | Related Articles | Metrics
Multi-objective Optimization of Energy Management Strategy for Fuel Cell Tram
YANG Jibin, XU Xiaohui, ZHANG Jiye, SONG Pengyun
机械工程学报. 2018, 54 (22): 153-159. doi: 10.3901/JME.2018.22.153
Abstract ( 679 )    PDF(249KB) ( 433 )
References | Related Articles | Metrics
Scheme of Ventilation Structure for TEFC Induction Motor
DING Shuye, WU Chengcheng, LIU Jianfeng, LI Zhongyu
机械工程学报. 2018, 54 (22): 160-167. doi: 10.3901/JME.2018.22.160
Abstract ( 724 )    PDF(489KB) ( 198 )
References | Related Articles | Metrics
Valve Characteristics and Economic Operation for Steam Distribution Mode of Ultra-supercritical Steam Turbine
HUANG Xijun, XU Jianqun, YU Zhongping, SUN Jian, ZHANG Haofeng, CHEN Xiaoxin
机械工程学报. 2018, 54 (22): 168-176. doi: 10.3901/JME.2018.22.168
Abstract ( 904 )    PDF(367KB) ( 274 )
References | Related Articles | Metrics
Experimental Study of the Cavitation Flow Characteristics in Diesel Engine Nozzle Under Different Injection Temperatures
HE Xu, LI Yankai, SHI Yonghao, HOU Xinghe, LI Xiangrong, LIU Fushui, LI Yikai
机械工程学报. 2018, 54 (22): 177-183. doi: 10.3901/JME.2018.22.177
Abstract ( 431 )    PDF(453KB) ( 387 )
References | Related Articles | Metrics
Development Status and Prospect of Rail Grinding Technology for High Speed Railway
FAN Wengang, LIU Yueming, LI Jianyong
机械工程学报. 2018, 54 (22): 184-193. doi: 10.3901/JME.2018.22.184
Abstract ( 675 )    PDF(588KB) ( 406 )
References | Related Articles | Metrics
New Pattern of Lifecycle Big-Data-Driven Smart Manufacturing Service for Complex Product
REN Shan, ZHANG Yingfeng, HUANG Binbin
机械工程学报. 2018, 54 (22): 194-203. doi: 10.3901/JME.2018.22.194
Abstract ( 828 )    PDF(724KB) ( 1163 )
References | Related Articles | Metrics
Design Method and Characteristics Study on Actuator of Giant Magnetostrictive Harmonic Motor
ZHU Linjian, CAO Xiangzheng, LU Yuqian
机械工程学报. 2018, 54 (22): 204-211. doi: 10.3901/JME.2018.22.204
Abstract ( 592 )    PDF(489KB) ( 262 )
References | Related Articles | Metrics
Mold Level Control of Large Size Ingot Based on Fuzzy Self-Tuning PID
GUO Chenglin, JIANG Ripeng, LI Xiaoqian, LI Ruiqing, ZHAN Lihua
机械工程学报. 2018, 54 (22): 212-217. doi: 10.3901/JME.2018.22.212
Abstract ( 651 )    PDF(287KB) ( 282 )
References | Related Articles | Metrics
Optimization Design of Wheel Loader Gearbox Considering Product Operational Big Data
WANG Shaojie, HOU Liang, FANG Yikai, LIN Haoqing, GUO Tao, JIAO Jianxin
机械工程学报. 2018, 54 (22): 218-232. doi: 10.3901/JME.2018.22.218
Abstract ( 1199 )    PDF(715KB) ( 338 )
References | Related Articles | Metrics