Journal of Mechanical Engineering

2018, Volume 54 Issue 21 Publication:05 November 2018
Previous Issue Next Issue
Adaptive Fault Tolerant Control for a Parallel Mechanism Driven by Nine Cables with Input Saturation and Full-state Constrains
YI Wangmin, ZHENG Yu, LIU Xinjun, MENG Fanwei
机械工程学报. 2018, 54 (21): 1-10. doi: 10.3901/JME.2018.21.001
Abstract ( 968 )    PDF(821KB) ( 309 )
References | Related Articles | Metrics
Simulation and Experiments of a Controllable Soft Spatial Fluidic Elastomer Manipulator
XIE Zhexin, GONG Zheyuan, WANG Tianmiao, WEN Li
机械工程学报. 2018, 54 (21): 11-18. doi: 10.3901/JME.2018.21.011
Abstract ( 1091 )    PDF(421KB) ( 504 )
References | Related Articles | Metrics
A Kind of Five Degrees of Freedom Hybrid Robot with All Rotating Shafts Continuous
XU Yundou, HU Jianhua, ZHANG Dongsheng, HOU Zhaowei, YAO Jiantao, ZHAO Yongsheng
机械工程学报. 2018, 54 (21): 19-24. doi: 10.3901/JME.2018.21.019
Abstract ( 847 )    PDF(297KB) ( 384 )
References | Related Articles | Metrics
Analytical Inverse Kinematics of Anthropomorphic Movements for 7-DOF Humanoid Manipulators
ZHAO Jing, GONG Shiqiu, ZHANG Ziqiang
机械工程学报. 2018, 54 (21): 25-32. doi: 10.3901/JME.2018.21.025
Abstract ( 745 )    PDF(496KB) ( 452 )
References | Related Articles | Metrics
Nutation Motion Based Trajectory Planning for a Novel Hybrid Ankle Rehabilitation Device
YAO Ligang, LIAO Zhiwei, LU Zongxing, ZHANG Jun
机械工程学报. 2018, 54 (21): 33-40. doi: 10.3901/JME.2018.21.033
Abstract ( 775 )    PDF(453KB) ( 389 )
References | Related Articles | Metrics
Gait Generator of Hexapod Robot on Slope Terrain Based on Hopf Oscillator with Feedback
YANG Xuefeng, GUO Zhenwu, WANG Binrui, WANG Ling, JIN Yinglian
机械工程学报. 2018, 54 (21): 41-48. doi: 10.3901/JME.2018.21.041
Abstract ( 772 )    PDF(380KB) ( 264 )
References | Related Articles | Metrics
Vibration Transmission Characteristics of a Quasi-zero Stiffness Torsional Isolator
WANG Xiaojie, LIU Hui, LI Wenping, GAO Tiantian
机械工程学报. 2018, 54 (21): 49-56. doi: 10.3901/JME.2018.21.049
Abstract ( 901 )    PDF(398KB) ( 377 )
References | Related Articles | Metrics
Analysis of Milling Vibration State Based on the Energy Entropy of WPD
ZHANG Zhi, LIU Chengying, LIU Xinjun, ZHANG Jie
机械工程学报. 2018, 54 (21): 57-62. doi: 10.3901/JME.2018.21.057
Abstract ( 720 )    PDF(328KB) ( 295 )
References | Related Articles | Metrics
Research on the Influence of Controllable Restrictor Parameters on the Characteristics of Hydrostatic Journal Bearings
XIONG Wanli, HU Can, LÜ Lang, ZHENG Lianggang
机械工程学报. 2018, 54 (21): 63-71. doi: 10.3901/JME.2018.21.063
Abstract ( 722 )    PDF(699KB) ( 384 )
References | Related Articles | Metrics
Vibration Suppression by Seeking Unbalance Mass-radius Product in Active Magnetic Bearing-rotor System with Varying Speed Condition
JIANG Kejian, WANG Jun, ZHU Changsheng
机械工程学报. 2018, 54 (21): 72-80. doi: 10.3901/JME.2018.21.072
Abstract ( 726 )    PDF(480KB) ( 371 )
References | Related Articles | Metrics
Research on the Effect of Seat Height on Cyclists' Dynamics Response in Vehicle-bicycle Accident
HU Lin, CHENG Qiyin, HUANG Jing, CHEN Qiang
机械工程学报. 2018, 54 (21): 81-89. doi: 10.3901/JME.2018.21.081
Abstract ( 687 )    PDF(436KB) ( 253 )
References | Related Articles | Metrics
Rolling Bearing Fault Diagnosis with Optimal Resonant Frequency Band Demodulation Based on Squared Envelope Spectral Correlated Kurtosis
CHEN Xianglong, FENG Fuzhou, ZHANG Bingzhi, JIANG Pengcheng
机械工程学报. 2018, 54 (21): 90-100. doi: 10.3901/JME.2018.21.090
Abstract ( 691 )    PDF(474KB) ( 377 )
References | Related Articles | Metrics
Time-varying Mesh Stiffness Calculation and Load Distribution among Teeth of Cycloid Internal Gear Pair with High Contact Ratio
GUI Xincheng, LI Lishun, LI Hongxun, ZHAN Junqing, XUE Xingdong
机械工程学报. 2018, 54 (21): 101-112. doi: 10.3901/JME.2018.21.101
Abstract ( 609 )    PDF(522KB) ( 265 )
References | Related Articles | Metrics
Research on Soft Three-body Contact of Rough Interface Mixed Lubrication Model
WANG Chao, KONG Junchao, WANG Wei
机械工程学报. 2018, 54 (21): 113-119. doi: 10.3901/JME.2018.21.113
Abstract ( 725 )    PDF(313KB) ( 372 )
References | Related Articles | Metrics
Research on Influence of Friction Surface Micro-topography on the Integration, Transmission and Its Action of Micro-dynamic Pressure Effect
ZHOU Shijie, ADAYI·Xieeryazidan
机械工程学报. 2018, 54 (21): 120-126. doi: 10.3901/JME.2018.21.120
Abstract ( 568 )    PDF(537KB) ( 269 )
References | Related Articles | Metrics
Scale Dependent Normal Contact Stiffness Fractal Model of Joint Interfaces
CHEN Jianjiang, YUAN Yuan, CHENG Yu, HE Yafei
机械工程学报. 2018, 54 (21): 127-137. doi: 10.3901/JME.2018.21.127
Abstract ( 531 )    PDF(430KB) ( 495 )
References | Related Articles | Metrics
Status and Progress of Product Shape Bionic Design

LUO Shijian, ZHANG Yufei, BIAN Ze, CHAN Ping
Journal of Mechanical Engineering. 2018, 54 (21): 138-155. doi: 10.3901/JME.2018.21.138
Abstract ( 1169 )    PDF(516KB) ( 1029 )
References | Related Articles | Metrics
Deviation Propagation Analysis and Accuracy Modeling for Multi-closed-loop Mechanism
ZHAO Qiangqiang, HONG Jun, GUO Junkang, LIU Zhigang
机械工程学报. 2018, 54 (21): 156-165. doi: 10.3901/JME.2018.21.156
Abstract ( 554 )    PDF(447KB) ( 283 )
References | Related Articles | Metrics
Experimental Study on the Texture of Interference Fit Interface for Remanufacturing of Low Disassembly Damage Demand
ZHOU Dan, GAO Xin, YI Lixiang, LIU Guangfu
机械工程学报. 2018, 54 (21): 166-172. doi: 10.3901/JME.2018.21.166
Abstract ( 578 )    PDF(489KB) ( 533 )
References | Related Articles | Metrics
Analysis of Surface Profile of the Cone-cylinder Match Guide Rollers for Superfinishing of Tapered Rollers with Crown
GAO Zuobin, YANG Xiaobo, GAO Haoyuan, GUO Xingcheng
机械工程学报. 2018, 54 (21): 173-182. doi: 10.3901/JME.2018.21.173
Abstract ( 674 )    PDF(341KB) ( 220 )
References | Related Articles | Metrics
Distribution Characteristic and Simulation Analysis on Grinding Residual Stress of Spiral Bevel Gears
LIANG Zhiqiang, HUANG Diqing, ZHOU Tianfeng, LI Hongwei, LIU Xinli, WANG Xibin
机械工程学报. 2018, 54 (21): 183-190. doi: 10.3901/JME.2018.21.183
Abstract ( 709 )    PDF(513KB) ( 647 )
References | Related Articles | Metrics
Analytical Model for the Elastic Stress Field during Scratching and Controllable Precision Grinding Mechanisms of Fused Silica
YAO Peng, WANG Wei, HUANG Chuanzhen, ZHU Hongtao
机械工程学报. 2018, 54 (21): 191-204. doi: 10.3901/JME.2018.21.191
Abstract ( 651 )    PDF(969KB) ( 285 )
References | Related Articles | Metrics
Development on Synergistic Process and Machine Tools Integrated Inclined Axis Grinding and Magnetorheological Polishing for Small Aspheric Surface
YIN Shaohui, GONG Sheng, HE Bowen, CHEN Fengjun, YIN Ziqiang, CAO Chengguo
机械工程学报. 2018, 54 (21): 205-211. doi: 10.3901/JME.2018.21.205
Abstract ( 794 )    PDF(474KB) ( 352 )
References | Related Articles | Metrics
Precision Grinding of Ultra-fine Cemented Carbide Based on Electrolytic In-process Dressing of a Multi-layer Brazed Diamond Wheel
WU Qiaoping, WANG Yu, ZHAO Hengi, ZHENG Weijia, DENG Zhaohui
机械工程学报. 2018, 54 (21): 212-220. doi: 10.3901/JME.2018.21.212
Abstract ( 769 )    PDF(538KB) ( 386 )
References | Related Articles | Metrics
Prediction and Experimental Verification of Workpiece Surface Topology in Axial Ultrasonic Vibration Assisted Grinding Based on Dynamic Profile Sampling Method
WANG Yan, LI Delin, LIU Jianguo, SONG Honglin, PENG Shuiping, WANG Rui
机械工程学报. 2018, 54 (21): 221-230. doi: 10.3901/JME.2018.21.221
Abstract ( 1098 )    PDF(554KB) ( 474 )
References | Related Articles | Metrics
Modeling and Predicting Surface Topography of the Ultrasonic Assisted Grinding Process Considering Ploughing Action
CHEN Haifeng, TANG Jinyuan, DENG Zhaohui, ZHOU Weihua
机械工程学报. 2018, 54 (21): 231-240. doi: 10.3901/JME.2018.21.231
Abstract ( 755 )    PDF(420KB) ( 261 )
References | Related Articles | Metrics