Journal of Mechanical Engineering

2018, Volume 54 Issue 23 Publication:05 December 2018
Previous Issue Next Issue
Evaluation Based on Invariants for Discrete Error Motion of Prismatic Pair
WANG Delun, WU Yu, WANG Zhi, DONG Huimin
机械工程学报. 2018, 54 (23): 1-9. doi: 10.3901/JME.2018.23.001
Abstract ( 1014 )    PDF(559KB) ( 372 )
References | Related Articles | Metrics
Adhesive Wear Models for Helical Gears under Quasi-static and Dynamic Loads
ZHOU Changjiang, LEI Yuying, WANG Hongbing, HAN Xu
机械工程学报. 2018, 54 (23): 10-22. doi: 10.3901/JME.2018.23.010
Abstract ( 825 )    PDF(551KB) ( 369 )
References | Related Articles | Metrics
Transmission and Tooth Profile Equation of Swing Output Movable Teeth Cam Mechanism
LI Jianfeng, ZHAO Hongwei, ZHANG Leiyu, YU Yang
机械工程学报. 2018, 54 (23): 23-31. doi: 10.3901/JME.2018.23.023
Abstract ( 755 )    PDF(510KB) ( 326 )
References | Related Articles | Metrics
Topological Design of Compliant Mechanisms with Maximum Stress Constraint
ZHAN Jinqing, LONG Liangming, LIU Min, ZHANG Xianmin
机械工程学报. 2018, 54 (23): 32-38. doi: 10.3901/JME.2018.23.032
Abstract ( 814 )    PDF(347KB) ( 592 )
References | Related Articles | Metrics
Hip-knee Joints Coordinated Autonomous Control Method for a Wearable Robot
ZHANG Xia, CHEN Renxiang, CHEN Lili, HASHIMOTO Minoru
机械工程学报. 2018, 54 (23): 39-46. doi: 10.3901/JME.2018.23.039
Abstract ( 806 )    PDF(418KB) ( 302 )
References | Related Articles | Metrics
Analyze the Influence of Key Parameters on the Contact Zone for the Planar Enveloping Internal-meshing Worm Drive
DENG Xingqiao, FENG Zhipeng, LI Shuangcen, WANG Jie, WANG Jinge
机械工程学报. 2018, 54 (23): 47-55. doi: 10.3901/JME.2018.23.047
Abstract ( 639 )    PDF(405KB) ( 462 )
References | Related Articles | Metrics
The Time-varying Mesh Stiffness Calculation for Gear Tooth Crack based on Analytical-finite Element Method
WU Jiateng, YANG Yu, CHENG Junsheng
机械工程学报. 2018, 54 (23): 56-62. doi: 10.3901/JME.2018.23.056
Abstract ( 910 )    PDF(417KB) ( 640 )
References | Related Articles | Metrics
Intelligent Robotic Assembly Method of Spaceborne Equipment Based on Visual Guidance
JI Xuquan, WANG Junchen, ZHAO Jiangdi, ZHANG Xiaohui, SUN Zhen
机械工程学报. 2018, 54 (23): 63-72. doi: 10.3901/JME.2018.23.063
Abstract ( 929 )    PDF(533KB) ( 616 )
References | Related Articles | Metrics
Dynamic Parametrical Modeling Method of Nonlinear Systems with Multiple Outputs Based on REFOR Algorithm
LUO Zhong, LIU Haopeng, ZHU Yunpeng, WANG Fei, HAN Qingkai
机械工程学报. 2018, 54 (23): 73-81. doi: 10.3901/JME.2018.23.073
Abstract ( 723 )    PDF(391KB) ( 247 )
References | Related Articles | Metrics
A Fast Deconvolution Approach for the Mapping of Coherent Acoustic Sources
XU Liang, HU Peng, ZHANG Yongbin, ZHANG Xiaozheng
机械工程学报. 2018, 54 (23): 82-92. doi: 10.3901/JME.2018.23.082
Abstract ( 570 )    PDF(351KB) ( 242 )
References | Related Articles | Metrics
Mean-optimized Empirical Mode Decomposition and Its Application in Rotor Fault Diagnosis
ZHENG Jinde, PAN Haiyang, CHENG Junsheng
机械工程学报. 2018, 54 (23): 93-101. doi: 10.3901/JME.2018.23.093
Abstract ( 712 )    PDF(441KB) ( 376 )
References | Related Articles | Metrics
Incipient Fault Diagnosis for Large Reducer Taper Roller Bearings Based on Non-convex Penalty Regularization Sparse Low-rank Matrix Approach
LI Qing, LIANG STEVEN Y
机械工程学报. 2018, 54 (23): 102-111. doi: 10.3901/JME.2018.23.102
Abstract ( 677 )    PDF(423KB) ( 446 )
References | Related Articles | Metrics
A Random Numerical Simulation Method for Launch and Recovery System of Seafloor Drill
JIN Yongping, WAN Buyan, LIU Deshun, PENG Youduo, GUO Yong
机械工程学报. 2018, 54 (23): 112-120. doi: 10.3901/JME.2018.23.112
Abstract ( 762 )    PDF(320KB) ( 289 )
References | Related Articles | Metrics
Precision Design and Control-performance Manufacturing Research of Large-size Individualized PEEK Implants

LI Dichen, YANG Chuncheng, KANG Jianfeng, WANG Ling, HUANG Lijun, WANG Lei, CAO Yi, SHI Changquan, LIAN Qin
Journal of Mechanical Engineering. 2018, 54 (23): 121-125. doi: 10.3901/JME.2018.23.121
Abstract ( 958 )    PDF(342KB) ( 427 )
References | Related Articles | Metrics
Study of Electroencephalography Cognitive Model of Product Image
YANG Cheng, CHEN Chen, TANG Zhichuan
机械工程学报. 2018, 54 (23): 126-136. doi: 10.3901/JME.2018.23.126
Abstract ( 727 )    PDF(406KB) ( 288 )
References | Related Articles | Metrics
Research Progress on Time-domain Modal Parameter Estimation Methods for Linear Time-varying Structures
MA Zhisai, DING Qian, LIU Li, ZHOU Sida
机械工程学报. 2018, 54 (23): 137-159. doi: 10.3901/JME.2018.23.137
Abstract ( 844 )    PDF(630KB) ( 490 )
References | Related Articles | Metrics
The Problem Flow Network Building and Solving Process Model for Complex Product
ZHANG Jianhui, LIANG Rui, HAN Bo, TAN Runhua, SUN Jianguang
机械工程学报. 2018, 54 (23): 160-173. doi: 10.3901/JME.2018.23.160
Abstract ( 596 )    PDF(503KB) ( 436 )
References | Related Articles | Metrics
Pareto-based Multi-objective Optimization of Focusing X-Ray Pulsar Telescope and Multi-physics Coupling Analysis
LI Liansheng, DENG Loulou, MEI Zhiwu, LÜ Zhengxin, LIU Jihong
机械工程学报. 2018, 54 (23): 174-184. doi: 10.3901/JME.2018.23.174
Abstract ( 694 )    PDF(490KB) ( 281 )
References | Related Articles | Metrics
Big Data Driven Key Factor Identification for Cycle-time Forecasting of Wafer Lots in Semiconductor Wafer Fabrication System
WANG Junliang, ZHANG Jie
机械工程学报. 2018, 54 (23): 185-191. doi: 10.3901/JME.2018.23.185
Abstract ( 800 )    PDF(222KB) ( 296 )
References | Related Articles | Metrics
Dynamic Optimization Design of Machine Tool Based on Modal Flexibility and Energy Distribution
LIAO Yongyi, LIAO Baiyu
机械工程学报. 2018, 54 (23): 192-198. doi: 10.3901/JME.2018.23.192
Abstract ( 1168 )    PDF(276KB) ( 351 )
References | Related Articles | Metrics
The Research of Machining Mechanism of Carbon Fiber Reinforced Plastic
JIA Zhenyuan, BI Guangjian, WANG Fuji, WANG Xiaonan, ZHANG Boyu
机械工程学报. 2018, 54 (23): 199-208. doi: 10.3901/JME.2018.23.199
Abstract ( 817 )    PDF(405KB) ( 579 )
References | Related Articles | Metrics
Pulse Electrochemical Narrow Slot Machining Based on Segmented Feeding Control Method
REN Kun, ZHANG Yumeng, JIANG Danyan, PAN Jun, CHEN Wenhua, HU Xuxiao
机械工程学报. 2018, 54 (23): 209-214. doi: 10.3901/JME.2018.23.209
Abstract ( 664 )    PDF(347KB) ( 279 )
References | Related Articles | Metrics
A New Model for Predicting Neurosurgery Skull Bone Grinding Temperature Field
YANG Min, LI Changhe, ZHANG Yanbin, JIA Dongzhou, ZHANG Xianpeng, LI Runze
机械工程学报. 2018, 54 (23): 215-222. doi: 10.3901/JME.2018.23.215
Abstract ( 654 )    PDF(577KB) ( 326 )
References | Related Articles | Metrics
Prediction of the Milling Stability Based on the Implicit Adams Method
ZHI Hongying, YAN Xianguo, DU Juan, CAO Qichao, ZHANG Tangsheng
机械工程学报. 2018, 54 (23): 223-232. doi: 10.3901/JME.2018.23.223
Abstract ( 639 )    PDF(449KB) ( 306 )
References | Related Articles | Metrics