Journal of Mechanical Engineering

2016, Volume 52 Issue 4 Publication:15 February 2016
Previous Issue Next Issue
Sound Source Identification Based on Functional Generalized Inverse Beamforming
LI Shu, XU Zhongming, HE Yansong, ZHANG Zhifei, CHEN Si
机械工程学报. 2016, 52 (4): 1-6. doi: 10.3901/JME.2016.04.001
Abstract ( 562 )    PDF(2586KB) ( 219 )
References | Related Articles | Metrics
Flaw Diagnosis Technology for Remanufactured Motor Rotor Based on Optimal Wavelet Packet Shannon Entropy
YAN Xiaoling, DONG Shiyun, XU Binshi
机械工程学报. 2016, 52 (4): 7-12. doi: 10.3901/JME.2016.04.007
Abstract ( 737 )    PDF(529KB) ( 292 )
References | Related Articles | Metrics
Surface Defect Recognition of Hot-rolled Steel Plates Based on Tetrolet Transform
XU Ke, WANG Lei, WANG Jingyu
机械工程学报. 2016, 52 (4): 13-19. doi: 10.3901/JME.2016.04.013
Abstract ( 966 )    PDF(742KB) ( 428 )
References | Related Articles | Metrics
Research Development on Wrinkling Prediction and Suppression for Sheet Hydroforming of Thin-walled Deep Drawing Parts
CHEN Yizhe, LIU Wei, YUAN Shijian
机械工程学报. 2016, 52 (4): 20-28. doi: 10.3901/JME.2016.04.020
Abstract ( 521 )    PDF(2218KB) ( 321 )
References | Related Articles | Metrics
Applicability Analysis of Yield Criterion for Advanced High Strength Steels DP590 under Warm-forming Condition
CHENG Cheng, DIAO Keshan, WU Xiangdong, WANG Wenping, WAN Min, CAI Zhengyang
机械工程学报. 2016, 52 (4): 29-35. doi: 10.3901/JME.2016.04.029
Abstract ( 678 )    PDF(465KB) ( 193 )
References | Related Articles | Metrics
Numerical Prediction of the Formability during Hot Forming of High Strength Steel Based on Continuum Damage Mechanics
YING Liang, SHI Dongyong, HU Ping, LIU Wenquan
机械工程学报. 2016, 52 (4): 36-44. doi: 10.3901/JME.2016.04.036
Abstract ( 515 )    PDF(3039KB) ( 270 )
References | Related Articles | Metrics
Deformation Behavior at Elevated Temperature and Processing Maps of Flange Blanks on Casting-rolling Compound Forming Technology
QIN Fangcheng, LI Yongtang
机械工程学报. 2016, 52 (4): 45-53. doi: 10.3901/JME.2016.04.045
Abstract ( 520 )    PDF(2444KB) ( 256 )
References | Related Articles | Metrics
Development and Industry Application of High Speed ICP Shape Measuring Roll
DU Fengshan, YAN Meng, HUANG Huagui, CHEN Enping, LIU Feng, SUN Jingna
机械工程学报. 2016, 52 (4): 54-59. doi: 10.3901/JME.2016.04.054
Abstract ( 524 )    PDF(2339KB) ( 195 )
References | Related Articles | Metrics
Electromagneto-fluid Coupling Simulation of Arc Rapid Prototyping Process with External High-frequency Magnetic Field
BAI Xingwang, ZHANG Haiou, ZHOU Xiangman, WANG Guilan
机械工程学报. 2016, 52 (4): 60-66. doi: 10.3901/JME.2016.04.060
Abstract ( 679 )    PDF(8445KB) ( 198 )
References | Related Articles | Metrics
Micro-gap Weld Tracking Based on Kalman Filtering of Magneto-optical Images
GAO Xiangdong, MO Ling, XIAO Zhenlin, CHEN Xiaohui
机械工程学报. 2016, 52 (4): 67-72. doi: 10.3901/JME.2016.04.067
Abstract ( 561 )    PDF(0KB) ( 336 )
References | Related Articles | Metrics
Neural Network Based on Sum Squared Relative Error to Predict the Multixial Fatigue Life of Magnesium Alloy
XIONG Ying, CEN Kai
机械工程学报. 2016, 52 (4): 73-81. doi: 10.3901/JME.2016.04.073
Abstract ( 696 )    PDF(529KB) ( 343 )
References | Related Articles | Metrics
Analysis of Shape Control Performance for Intermediate Roll Shifting of Universal Crown Mill
LIU Yang, WANG Xiaochen, YANG Quan, PENG Jinsong
机械工程学报. 2016, 52 (4): 82-89. doi: 10.3901/JME.2016.04.082
Abstract ( 661 )    PDF(784KB) ( 351 )
References | Related Articles | Metrics
High-temperature Constitutive Relationship of Non-oriented Electrical Steel Based on Modified Arrhenius Model
CAO Jianguo, WANG Tiancong, LI Hongbo, QIAO Yu, WEN Dun, ZHOU Yunsong
机械工程学报. 2016, 52 (4): 90-96. doi: 10.3901/JME.2016.04.090
Abstract ( 821 )    PDF(555KB) ( 370 )
References | Related Articles | Metrics
Study on the Joule-Thomson Effect during Leakage in High Pressure Vessels
AI Gang, LIU Yinghua
机械工程学报. 2016, 52 (4): 97-102. doi: 10.3901/JME.2016.04.097
Abstract ( 617 )    PDF(6604KB) ( 277 )
References | Related Articles | Metrics
Research on Propagation and Frictional Heat of Crack in Ultrasonic Fatigue Loading
LI Zhi, XUE Hongqian
机械工程学报. 2016, 52 (4): 103-110. doi: 10.3901/JME.2016.04.103
Abstract ( 654 )    PDF(4232KB) ( 610 )
References | Related Articles | Metrics
High Reliability Electromechanical-hydraulic Short-range Cutting Transmission System of Shearer
YANG Yang, ZOU Jiahang, QIN Datong, YUAN Aihui
机械工程学报. 2016, 52 (4): 111-119. doi: 10.3901/JME.2016.04.111
Abstract ( 605 )    PDF(502KB) ( 270 )
References | Related Articles | Metrics
Research on Energy Absorption Characteristics of Dual-phase Steel Based on Micro-crystalline Phase Modeling
ZHUANG Weimin, XIE Dongxuan, YE Hui
机械工程学报. 2016, 52 (4): 120-125. doi: 10.3901/JME.2016.04.120
Abstract ( 540 )    PDF(2209KB) ( 179 )
References | Related Articles | Metrics
Numerical Simulation Study on Longitudinal Impact of Vehicle under Shunting Condition
YANG Liangliang, LUO Shihui, FU Maohai, ZHOU Shangshu, ZENG Wenchang
机械工程学报. 2016, 52 (4): 126-132. doi: 10.3901/JME.2016.04.126
Abstract ( 654 )    PDF(565KB) ( 472 )
References | Related Articles | Metrics
Research on Dynamic Load and Stress of High-speed EMU Motor Hanger Considering Influence of Gear Transmission System
ZHANG Li, REN Zunsong, SUN Shouguang, YANG Guang
机械工程学报. 2016, 52 (4): 133-140. doi: 10.3901/JME.2016.04.133
Abstract ( 739 )    PDF(2543KB) ( 277 )
References | Related Articles | Metrics
Experimental and Theoretical Analysis for Heat Transfer and Flow Performance of Mini-channel Parallel Flow Heat Exchanger in Vehicle
WANG Ting, GU Bo, QIAN Cheng, MA Hongtao
机械工程学报. 2016, 52 (4): 141-147. doi: 10.3901/JME.2016.04.141
Abstract ( 581 )    PDF(568KB) ( 462 )
References | Related Articles | Metrics
Influence of Synthetic Jet on Aerodynamic Characteristics of Blunt Trailing Edge Wind Turbine Airfoil
CHENG Xiaolong, MA Chaochen, LIU Heng, YANG Ce
机械工程学报. 2016, 52 (4): 148-156. doi: 10.3901/JME.2016.04.148
Abstract ( 555 )    PDF(1048KB) ( 189 )
References | Related Articles | Metrics
Study on the Effects of Venturi-EGR System on Turbo-charged Diesel Engine Performance
WANG Qiwei, NI Jimin, CHEN Hong, GU Shifan, SHI Xiuyong, SHEN Kai
机械工程学报. 2016, 52 (4): 157-164. doi: 10.3901/JME.2016.04.157
Abstract ( 961 )    PDF(1784KB) ( 232 )
References | Related Articles | Metrics
Numerical Analysis and Validation of Fluid Pressure in the Back Chamber of Centrifugal Pump
DONG Wei, CHU Wuli
机械工程学报. 2016, 52 (4): 165-170. doi: 10.3901/JME.2016.04.165
Abstract ( 837 )    PDF(1042KB) ( 238 )
References | Related Articles | Metrics
Research on Filtering Characteristics of Hydraulic Pulsation Attenuator Based on Bionic Principle of Basilar Membrane of Cochlea
HE Shanghong, XIONG Yuwei, WANG Wen
机械工程学报. 2016, 52 (4): 171-177. doi: 10.3901/JME.2016.04.171
Abstract ( 644 )    PDF(960KB) ( 257 )
References | Related Articles | Metrics
Theoretical Computation and Verification for Fluid Static Pressure in Centrifugal Pump Side Chamber
LIU Zailun, ZHANG Sen, SHAO Ancan, ZENG Jilai
机械工程学报. 2016, 52 (4): 178-184. doi: 10.3901/JME.2016.04.178
Abstract ( 696 )    PDF(507KB) ( 368 )
References | Related Articles | Metrics
Numerical Simulation Research on Cone Self-acting Gas Lubrication Bearing Dynamics
CHEN Guangqiang, YANG Yunjun, LEI Juanmian, CHEN Bingyan, LIU Zhou
机械工程学报. 2016, 52 (4): 185-191. doi: 10.3901/JME.2016.04.185
Abstract ( 637 )    PDF(2000KB) ( 315 )
References | Related Articles | Metrics
Research of Operating Characteristics and Energy Efficiency of Traction Elevator with Hybrid Electric-hydraulic Drive
ZHAO Bin, QUAN Long, HAO Yunxiao
机械工程学报. 2016, 52 (4): 192-198. doi: 10.3901/JME.2016.04.192
Abstract ( 665 )    PDF(977KB) ( 398 )
References | Related Articles | Metrics
Train’s Interior Form Design Oriented Visual Image of Passenger Research
ZHANG Bingchen, GUO Weimin, WANG Yanqun, LI Shuncai, HUANG Ying, XU Jing
机械工程学报. 2016, 52 (4): 199-205. doi: 10.3901/JME.2016.04.199
Abstract ( 604 )    PDF(665KB) ( 243 )
References | Related Articles | Metrics
Order Sequence Optimization for “part-to-picker” Order Picking System
WU Yingying, MENG Xiangxu, WANG Yanyan, HU Jinchang
机械工程学报. 2016, 52 (4): 206-210. doi: 10.3901/JME.2016.04.206
Abstract ( 866 )    PDF(669KB) ( 326 )
References | Related Articles | Metrics