Journal of Mechanical Engineering

2016, Volume 52 Issue 3 Publication:05 February 2016
Previous Issue Next Issue
High-speed Point-to-point Trajectory Planning of a 2-DOF Cable Driven Parallel Manipulator
ZHANG Wenjia, SHANG Weiwei
机械工程学报. 2016, 52 (3): 1-8. doi: 10.3901/JME.2016.03.001
Abstract ( 4224 )    PDF(387KB) ( 2242 )
References | Related Articles | Metrics
Symmetrical 2R1T Parallel Mechanism without Parasitic Motion
CHEN Ziming, ZHANG Yang, HUANG Kun, HUANG Zhen
机械工程学报. 2016, 52 (3): 9-17. doi: 10.3901/JME.2016.03.009
Abstract ( 1477 )    PDF(1993KB) ( 687 )
References | Related Articles | Metrics
Free Gait Generation Algorithm for a Hexapod Robot  Based on Discretization
LI Manhong, ZHANG Minglu, ZHANG Jianhua, ZHANG Xiaojun
机械工程学报. 2016, 52 (3): 18-25. doi: 10.3901/JME.2016.03.018
Abstract ( 1238 )    PDF(1002KB) ( 540 )
References | Related Articles | Metrics
Studies on Meshing Mechanism of Helical Surfaces in Planetary Roller Screw Mechanism
FU Xiaojun, LIU Geng, MA Shangjun, TONG Ruiting
机械工程学报. 2016, 52 (3): 26-33. doi: 10.3901/JME.2016.03.026
Abstract ( 1002 )    PDF(773KB) ( 474 )
References | Related Articles | Metrics
Grasping Performance Analysis of a Biped-pole-climbing Robot

JIANG Li, GUAN Yisheng, ZHOU Xuefeng, YANG Tieniu, SU Manjia WU Hongmin
Journal of Mechanical Engineering. 2016, 52 (3): 34-40. doi: 10.3901/JME.2016.03.034
Abstract ( 4055 )    PDF(791KB) ( 1926 )
References | Related Articles | Metrics
Periodic Sparsity Oriented Super-wavelet Analysis with Application to Motor Bearing Fault Detection of Wind Turbine
HE Wangpeng, ZI Yanyang, CHEN Binqiang, YAO Bin, ZHANG Zhousuo
机械工程学报. 2016, 52 (3): 41-48. doi: 10.3901/JME.2016.03.041
Abstract ( 982 )    PDF(894KB) ( 581 )
References | Related Articles | Metrics
Analysis of the Influence of the Mechanical Imbalance and the Bearing Clearance on the Operating Stability of Hydro-power Unit
MENG Long, LIU Meng, ZHI Falin, ZHOU Lingjiu, WANG Zhengwei
机械工程学报. 2016, 52 (3): 49-55. doi: 10.3901/JME.2016.03.049
Abstract ( 852 )    PDF(1345KB) ( 380 )
References | Related Articles | Metrics
Experimental Investigations on Energy-transfer Characteristics of Guided Wave in Multi-rod System
LIU Xiucheng, XU Xiu, WU Bin, GAO Bo, HE Cunfu
机械工程学报. 2016, 52 (3): 56-62. doi: 10.3901/JME.2016.03.056
Abstract ( 710 )    PDF(625KB) ( 417 )
References | Related Articles | Metrics
Blind Deconvolution and Frequency Domain Compressive Sensing Application in Bearing Composite Acoustic Fault Diagnosis
ZHOU Jun, WU Xing, CHI Yilin, PAN Nan, LIU Chang
机械工程学报. 2016, 52 (3): 63-70. doi: 10.3901/JME.2016.03.063
Abstract ( 859 )    PDF(941KB) ( 523 )
References | Related Articles | Metrics
Aircraft Structure’s Response Prediction Analysis and Experimental Study in High-strength Broadband Noise Environments
LIN Huagang, YAN Yunju, LI Pengbo
机械工程学报. 2016, 52 (3): 71-78. doi: 10.3901/JME.2016.03.071
Abstract ( 928 )    PDF(1061KB) ( 467 )
References | Related Articles | Metrics
Modal Parameter Identification of Time-varying Structures via Moving Least Square Method
YANG Wu, LIU Li, ZHOU Sida, MA Zhisai
机械工程学报. 2016, 52 (3): 79-85. doi: 10.3901/JME.2016.03.079
Abstract ( 1115 )    PDF(457KB) ( 380 )
References | Related Articles | Metrics
TEHL Analysis of Aero-engine Mainshaft Roller Bearing Based on Quasi-dynamics
SHI Xiujiang, WANG Liqin
机械工程学报. 2016, 52 (3): 86-92. doi: 10.3901/JME.2016.03.086
Abstract ( 1255 )    PDF(613KB) ( 459 )
References | Related Articles | Metrics
Effect of Surface Texture on Asperity Flattening at Plastic Deformed Interface in Static Contact State
HU Zhaowen, LIU Kun, LIU Xiaojun, WANG Wei
机械工程学报. 2016, 52 (3): 93-100. doi: 10.3901/JME.2016.03.093
Abstract ( 723 )    PDF(2456KB) ( 393 )
References | Related Articles | Metrics
Theoretical and Experimental Research on the Performance of Anti-swirl Flow for the Static and Dynamic Characteristics of Seals
SUN Dan, WANG Shuang, AI Yanting, WANG Keming, XIAO Zhonghui, LI Yun, YU Xiaodan
机械工程学报. 2016, 52 (3): 101-109. doi: 10.3901/JME.2016.03.101
Abstract ( 649 )    PDF(2372KB) ( 297 )
References | Related Articles | Metrics
Tribological Properties of Aqueous Solutions with Polyether and Borate
GU Guoping, ZHANG Chaohui, HUANG Baocheng, LI Sen, WANG Lei
机械工程学报. 2016, 52 (3): 110-117. doi: 10.3901/JME.2016.03.110
Abstract ( 658 )    PDF(556KB) ( 311 )
References | Related Articles | Metrics
Motional Cable Harness Physical Characteristic Oriented Modeling and Kinetic Simulation Technology under Smooth Plane Constraints
JIN Wangtao, LIU Jianhua, LIU Jiashun, TANG Chengtong, LIN Haili
机械工程学报. 2016, 52 (3): 118-127. doi: 10.3901/JME.2016.03.118
Abstract ( 789 )    PDF(1447KB) ( 743 )
References | Related Articles | Metrics
Bearing Capacity Model and Design Method of Permanent Magnetic Bearings Based on Halbach Array
WANG Nianxian, WANG Dongxiong, CHEN Kuisheng, WU Huachun
机械工程学报. 2016, 52 (3): 128-135. doi: 10.3901/JME.2016.03.128
Abstract ( 738 )    PDF(518KB) ( 408 )
References | Related Articles | Metrics
Surface Reconstruction with α-shape Based on Optimization of Surface Local Sample
SUN Dianzhu, WEI Liang, LI Yanrui, BAI Yinlai
机械工程学报. 2016, 52 (3): 136-142. doi: 10.3901/JME.2016.03.136
Abstract ( 781 )    PDF(1395KB) ( 339 )
References | Related Articles | Metrics
The Identification of Multivariable Radial Magnetic Bearing System Based on RLS-DE Algorithm
WEI Tong, TIAN Shuangbiao
机械工程学报. 2016, 52 (3): 143-150. doi: 10.3901/JME.2016.03.143
Abstract ( 545 )    PDF(876KB) ( 375 )
References | Related Articles | Metrics
Carbon Emission Analysis for Product Assembly Process
ZHANG Lei, MA Jun, FU Yonggao, XU Guohao, SU Yong
机械工程学报. 2016, 52 (3): 151-160. doi: 10.3901/JME.2016.03.151
Abstract ( 685 )    PDF(424KB) ( 257 )
References | Related Articles | Metrics
Research on Optimization of Column Structure Design for Dynamic Performance of Machine Tool
LIU Chengying, TAN Feng, WANG Liping, CAI Zhaoyong
机械工程学报. 2016, 52 (3): 161-168. doi: 10.3901/JME.2016.03.161
Abstract ( 1035 )    PDF(1057KB) ( 619 )
References | Related Articles | Metrics
New Mathematic Method of Calculating Instantaneous Un-deformed Chip Thickness with Tool Run-out in Micro-end-milling
NIE Qiang, HUANG Kai, BI Qingzhen, ZHU Limin
机械工程学报. 2016, 52 (3): 169-178. doi: 10.3901/JME.2016.03.169
Abstract ( 941 )    PDF(1336KB) ( 407 )
References | Related Articles | Metrics
Generation Mechanism of Saw-tooth Chip in Turning of GH4169 with PCBN Tool
WU Mingyang ZHAO XU JI Wei CHENG Yaonan LIU Li LIU Xianli
机械工程学报. 2016, 52 (3): 179-186. doi: 10.3901/JME.2016.03.179
Abstract ( 109347 )    PDF(2273KB) ( 833 )
References | Related Articles | Metrics
Influence of Diamond Wiresaw Excited by Transverse Ultrasonic Vibration on Cutting Force and Critical Cutting Depth of Hard and Brittle Materials
LI Lun, LI Shujuan, TANG Aofei, LI Yan
机械工程学报. 2016, 52 (3): 187-196. doi: 10.3901/JME.2016.03.187
Abstract ( 816 )    PDF(487KB) ( 388 )
References | Related Articles | Metrics
Interference Study of Gear Form Grinding Based on Induced Normal Curvature
DING Guolong, ZHANG Song, ZHAO Daxing, ZHAO Dongxiong
机械工程学报. 2016, 52 (3): 197-204. doi: 10.3901/JME.2016.03.197
Abstract ( 617 )    PDF(487KB) ( 378 )
References | Related Articles | Metrics
Research on the Additive Manufacturing Process Based on High-speed Metal Particles Cold-state Impact
TIAN Xiaoyong, CAO Jiahe, CAO Yi, TIAN Xiaoyang, ZHANG Minjuan, LI Dichen
机械工程学报. 2016, 52 (3): 205-212. doi: 10.3901/JME.2016.03.205
Abstract ( 746 )    PDF(1993KB) ( 384 )
References | Related Articles | Metrics