THE APPLICATION OF SEM LOAD INSTRUMENT TO THE STUDY OF FRACTURE PROCESSES OF A COMPOSITE

›› 1990, Vol. 26 ›› Issue (4): 64-67.

• Article • Previous Articles Next Articles

THE APPLICATION OF SEM LOAD INSTRUMENT TO THE STUDY OF FRACTURE PROCESSES OF A COMPOSITE

Cao Li;Zhao Yiongchun;Geng Lin;Yao Zhongkai

Beijing General Research Institute for Non-ferrous Metals Harbin Institute of Technology

Published:1990-07-01

Abstract

Abstract: The dynamic tensile and compressive processes of the silicon carbide whisker reinforced aluminium (SiCw/Al) composite was studied in a scanning electron microscope (SEM) by using SEM load instrument. The SEM in situ observing technique was researched. The results show that this technique is very efficient to the study of the fracture processes of the SiCw/Al composites.

Key words: SEM, SiC晶须, 断裂, 复合材料, 铝

Cao Li;Zhao Yiongchun;Geng Lin;Yao Zhongkai. THE APPLICATION OF SEM LOAD INSTRUMENT TO THE STUDY OF FRACTURE PROCESSES OF A COMPOSITE[J]. , 1990, 26(4): 64-67.

[1]	LUO Zhong, SHI Baolong, WU Fayong, LI Yuqi, LIU Kaining, ZHANG Xiaoxia. Study on the Vibration Characteristics of Bolted Joint Rotor System Considering Assembly Technology [J]. Journal of Mechanical Engineering, 2024, 60(8): 396-406.
[2]	HU Song, XU Zhaobo, XIAO Leicai, FENG Pingfa, ZENG Long. Research on Reconfigurable and Flexible Assembly Technology for Cross-category Products [J]. Journal of Mechanical Engineering, 2024, 60(6): 69-81.
[3]	WANG Junjiu, LIU Jinyu, HOU Xiujuan, QI Zhenguo, LI Zhimin, LIU Tao. Hybrid Mechanistic and Data-driven Modeling Method of Compliant Assembly Variation Prediction for Train Body [J]. Journal of Mechanical Engineering, 2024, 60(6): 177-186.
[4]	LIU Daxin, WANG Ke, LIU Zhenyu, XU Jiatong, TAN Jianrong. Research on Digital Twin Modeling Method for Robotic Assembly Cell Based on Data Fusion and Knowledge Reasoning [J]. Journal of Mechanical Engineering, 2024, 60(5): 36-50.
[5]	SHAO Haidong, LIN Jian, MIN Zhishan, MING Yuhang. Improved Semi-supervised Prototype Network for Cross-domain Fault Diagnosis of Gearbox under Out-of-distribution Interference Samples [J]. Journal of Mechanical Engineering, 2024, 60(4): 212-221.
[6]	WANG Zhanxi, ZHANG Yiming, ZHANG Banghai, LUO Ziyan, SHI Mengge. Influence of Excitation Amplitude and Load on the Characteristics of a Quasi-zero Stiffness Isolator [J]. Journal of Mechanical Engineering, 2024, 60(3): 28-33.
[7]	YUAN Song, GUO Xiaoguang, JIN Zhuji, KANG Renke, GUO Dongming. A Review of High-efficiency and Ultra-low Damage Processing Mechanism and Technology of Diamond [J]. Journal of Mechanical Engineering, 2024, 60(3): 337-353.
[8]	YE Qing, JIANG Xiao, ZHANG Yao, WANG Ruochen, DING Renkai, CAI Yingfeng. H_∞ Control and Experimental Study of Magnetorheological Semi-active Suspension with Actuator Response Delay [J]. Journal of Mechanical Engineering, 2024, 60(18): 276-287.
[9]	CHEN Gengbiao, LIU Zhiwen, YIN Lairong, YI Jijun, ZHANG Tuo. Characteristic Analysis of Semi-active Triple-auxiliary-chambers Air Spring Vibration Absorber [J]. Journal of Mechanical Engineering, 2024, 60(17): 194-207.
[10]	YU Weigang, WEN Sijie, LI Jianjun, LI Xinyu. Affordance Reasoning-based Sequence Planning Manner for Human-robot Collaborative Disassembly [J]. Journal of Mechanical Engineering, 2024, 60(17): 297-309.
[11]	GUO Feiyan, XIAO Shihong, XIAO Qingdong, WANG Zhongqi. Structure Assembly Quality Controlling Technology Oriented to Performance Assurance for New-generation Aircraft [J]. Journal of Mechanical Engineering, 2024, 60(16): 412-428.
[12]	JIANG Lin, LI Yunfei, TANG Bo, LIU Qi, GUO Yufei, ZHAO Hui. Dynamic Localization Research on Improved AMCL Based on the Dimensional Chain of Semantic Objects [J]. Journal of Mechanical Engineering, 2024, 60(15): 49-59.
[13]	LIN Qiyin, JIA Yiming, ZHOU Yicong, WANG Chen, HONG Jun. Analysis of Topology Optimization Parameters for Assembly Structure [J]. Journal of Mechanical Engineering, 2024, 60(15): 291-303.
[14]	BAO Hong, GAO Yifei, WAN Chao, LIU Zhifeng, ZHU Libin, WANG Zheng. Interactive Design and Knowledge Transfer Research of Product Easy Disassembly for Multi-stage Recycling Needs [J]. Journal of Mechanical Engineering, 2024, 60(13): 257-267.
[15]	LI Huanxiao, Lü Shengnan, MA Xiaofei, LI Hao, LIN Kunyang. Design Method For Modular Units of Space Antennas Assembled On-orbit [J]. Journal of Mechanical Engineering, 2024, 60(13): 345-353.

THE APPLICATION OF SEM LOAD INSTRUMENT TO THE STUDY OF FRACTURE PROCESSES OF A COMPOSITE

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments