THE APPLICATION OF SEM LOAD INSTRUMENT TO THE STUDY OF FRACTURE PROCESSES OF A COMPOSITE

›› 1990, Vol. 26 ›› Issue (4): 64-67.

• Article • Previous Articles Next Articles

THE APPLICATION OF SEM LOAD INSTRUMENT TO THE STUDY OF FRACTURE PROCESSES OF A COMPOSITE

Cao Li;Zhao Yiongchun;Geng Lin;Yao Zhongkai

Beijing General Research Institute for Non-ferrous Metals Harbin Institute of Technology

Published:1990-07-01

Abstract

Abstract: The dynamic tensile and compressive processes of the silicon carbide whisker reinforced aluminium (SiCw/Al) composite was studied in a scanning electron microscope (SEM) by using SEM load instrument. The SEM in situ observing technique was researched. The results show that this technique is very efficient to the study of the fracture processes of the SiCw/Al composites.

Key words: SEM, SiC晶须, 断裂, 复合材料, 铝

Cao Li;Zhao Yiongchun;Geng Lin;Yao Zhongkai. THE APPLICATION OF SEM LOAD INSTRUMENT TO THE STUDY OF FRACTURE PROCESSES OF A COMPOSITE[J]. , 1990, 26(4): 64-67.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1990/V26/I4/64

[1]	WEI Zhaohui, WANG Zihang, YE Xiangrui, ZHANG Kaifu, CHENG Hui, GUO Liuming, LIANG Dejian. Real-time Perception and Precision Control Technology for Deep Cavity Structure Assembly Process Based on Multi-sensor Fusion [J]. Journal of Mechanical Engineering, 2026, 62(7): 52-66.
[2]	ZHAO Xiangyang, JIAO Yanlong, HOU Xinxiang, WANG Jin, XING Jiankang, XIE Tianwei, ZHOU Na, LI Yupeng, JI Fengchuan, PENG Yan. Research on Service Accuracy of Roll System Assembly Structure of Rolling Mill [J]. Journal of Mechanical Engineering, 2026, 62(6): 29-46.
[3]	WANG Guoqing, CHEN Jincun, YUAN Weijia, LIU Qi, HU Runzhi, WANG Guodong, HUANG Sihan. Final Assembly Pull: Entering the Era of Aerospace Mass Customization Production [J]. Journal of Mechanical Engineering, 2026, 62(5): 1-11.
[4]	TIAN Shichen, ZHANG Chunjiang, GAO Liang, LI Xinyu. Multi-objective Scheduling Method of Distributed Assembly Job Shop for Final Assembly Pulling Production Mode [J]. Journal of Mechanical Engineering, 2026, 62(5): 26-36.
[5]	LI Jiwei, ZHANG Jian, REN Xiaoyu, CHEN Haojie. Ensemble Genetic Programming for Complex Products Multi-workshop Collaborative Scheduling Problem with Final Assembly Pull [J]. Journal of Mechanical Engineering, 2026, 62(5): 37-48.
[6]	HUANG Ming, HUANG Sihan, CHEN Jianpeng, DONG Wei, WANG Baicun, RUAN Bing, GAO Yunpeng, WANG Guoxin, YAN Yan. Dynamic Scheduling Optimization of Island Assembly Lines Under Uncertain Disturbances by Multi-objective Deep Reinforcement Learning [J]. Journal of Mechanical Engineering, 2026, 62(5): 74-87.
[7]	ZHENG Xiaohu, CAO Lijun, LIU Xiaojia, DU Siqi, WU Wenqiang, ZHANG Jie, DING Siyi. Research on Traceability Method of Aerospace Product Assembly Quality Based on Knowledge Graph [J]. Journal of Mechanical Engineering, 2026, 62(5): 88-99.
[8]	WANG Guodong, LIU Jingtao, ZHAO Qin, WANG Hongjun. Research and Practice of KBOM-based Pull Collaborative Platform in Aerospace Manufacturing [J]. Journal of Mechanical Engineering, 2026, 62(5): 100-116.
[9]	ZHAO Penghao, LIU Jianhua, GONG Hao, WANG Xingjie. Sub-regional Virtual Material Equivalent Modeling of Joint Interface Based on Fractal Contact Theory and Semi-analytical Method [J]. Journal of Mechanical Engineering, 2026, 62(5): 230-243.
[10]	ZHU Ruikang, JIA Qiang, WANG Yishu, ZHANG Hongqiang, MA Limin, ZOU Guisheng, GUO Fu. Application Challenges and Research Progress of Copper Sintering for Power Module Packaging [J]. Journal of Mechanical Engineering, 2026, 62(2): 115-130.
[11]	GAO Xiang, ZHANG Xiang, NIU Junchuan, HE Lei, WANG Zhonglong, WU Hu. Non-probabilistic Reliability Analysis and Optimization of Semi-active Suspension with Energy Harvesting Characteristic [J]. Journal of Mechanical Engineering, 2026, 62(1): 374-383.
[12]	WANG Song, JIANG Xiao, WU Dan. Visual Segmentation and Grasping Pose Generation Algorithms for Robotic Manipulation of Flexible Cables [J]. Journal of Mechanical Engineering, 2025, 61(9): 231-240.
[13]	ZHU Haihua, FU Tairan, LI Fei, LIU Changchun, CAI Qixiang, TANG Dunbing. Prediction of Process-level Kitting Time of Assembly Materials for Complex Products Based on Digital Twin [J]. Journal of Mechanical Engineering, 2025, 61(8): 384-398.
[14]	BAO Hong, WANG Zheng, TAO Jing, LI Hongzhen, YU Suiran, SONG Peilong. A Non-cooperative Game Modular Design Method for Mechanical and Electrical Products for Reuse and Assembly Complexity Balance [J]. Journal of Mechanical Engineering, 2025, 61(5): 285-296.
[15]	WANG Peixu, PEI Fengque, LIU Jianhua, GUO Haoxin, ZHUANG Cunbo. Complex Product Assembly Scheduling Problem Considering Allocation of Workers with Multiple Skilled Level [J]. Journal of Mechanical Engineering, 2025, 61(4): 389-402.

THE APPLICATION OF SEM LOAD INSTRUMENT TO THE STUDY OF FRACTURE PROCESSES OF A COMPOSITE

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments