Control Strategy Research on Avoid and Escape the Singular Area of the 3PRR Parallel Platform Based on SEM Environment#br#

doi:10.3901/JME.2015.23.001

Abstract

Abstract: Micro-nano operating system is an important part in the field of precision operation and machining. The sample stage of the micro-nano operating system is used to place and move samples at large-scale stroke; therefore the sample stage needs to possess the features of large stroke and high precision positioning. Macro-micro combination method can make up the stroke deficiency of the precision positioning platform, whereas parallel mechanism can realize high precision positioning. Hence, under the environment of the scanning electron microscopy (SEM), the 3PRR parallel positioning stage, which has 3 degrees of freedom and whose chains each consist of a prismatic joint and two revolute joints, is adopted to constitute the macro-movement part of the macro-micro combination precision positioning platform. In order to achieve the large stroke and high precision positioning, the workspace and singularity distribution of the 3PRR require to be analyzed. The Jacobi matrix is obtained by calculating the kinematics equation. And after the analysis of the characteristics of the Jacobi matrix, the nonsingular workspace distribution of the 3PRR stage is acquired. Then, based on the characteristics of the Jacobi matrix and the singular workspace distribution, two control strategies are presented for avoiding singular area, and one control strategy for escaping the singular position. The corresponding theory of the strategies is provided. The simulation and analytic results show that these strategies can ensure the precision positioning and controllability of the mechanism.

Key words: 3PRR, avoid, control strategy, escape, micro-nano operation, parallel platform, SEM, singularity

MO Jiasi, ZHANG Xianmin, QIU Zhicheng, WEI Junyang. Control Strategy Research on Avoid and Escape the Singular Area of the 3PRR Parallel Platform Based on SEM Environment#br#[J]. Journal of Mechanical Engineering, 2015, 51(23): 1-11.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2015.23.001

http://www.cjmenet.com.cn/EN/Y2015/V51/I23/1

References

[1] 李勇滔，韩立，殷伯华，等．基于SEM的压电式微纳操纵系统[J]．压电与声光，2010(5)：782-785． LI Yongtao，HAN Li，YIN Bohua，et al．Piezoelectric micro-nano manipulating system based on SEM[J]. Piezoelectrics and Acoustooptics，2010(5)：782-785．
[2] 袁帅，王越超，席宁，等．机器人化微纳操作研究进展[J]．科学通报，2013(S2)：28-39．YUAN Shuai，WANG Yuechao，XI Ning，et al．Research progress of robotics based micro/nano-manipulation[J]. Chinese Science Bulletin，2013(S2)：28-39．
[3] 邢航，张铁民，杨秀丽，等．大行程高精度驱动系统的研究[J]．机械科学与技术，2013(6)：888-894．XING Hang，ZHANG Tiemin，YANG Xiuli，et al．Advances in large-stroke and high-resolution drive system[J]. Mechanical Science and Technology，2013(6)：888-894．
[4] SHARON A，HARDT D．Enhancement of robot accuracy using endpoint feedback and a macro-micro manipulator system[C]// American Control Conference，June 6-8，1984，California，San Diego．Washington，DC：IEEE International Conference on IEEE，1984：1836-1845．
[5] SHARON A，HOGAN N，HARDT D．High bandwidth force regulation and inertia reduction using a macro/micro manipulator system[C]// Robotics and Automation，1988．Proceedings，April 24-29，1988，Philadelphia，Pennsylvania．Washington DC：IEEE，1988：126-132．
[6] 王嵩宇，刘剑，宁润涛．SEM在半导体工艺研究中的应用实例[J]．电子与封装，2012(12)：40-43．WANG Songyu，LIU Jian，NING Runtao. SEM application examples in semiconductor technology research[J]. Electronics and Packaging，2012(12)：40-43．
[7] 朱玉龙．基于双压电驱动宏微结合的纳米定位台研究[D]．苏州：苏州大学，2013．ZHU Yulong．Researching on coarse fine nano positioning stage based on dual piezoelectric drive[D]．Suzhou：Soochow University，2013.
[8] 胡兵．基于直线电机宏微双重驱动大行程精密定位台的研究[D]．广州：广东工业大学，2013．HU Bing．Research on macro/micro dual drive precision positioning stage based on linear motor[D]．Guangzhou：Guangdong University of Technology，2013.
[9] 黄真．并联机器人机构学理论及控制[M]．北京：机械工业出版社，1997．HUANG Zhen．Parallel robot mechanism theory and control[M]．Beijing：China Machine Press，1997．
[10] SHIRKHODAIE A H，SONI A H．Forward and inverse synthesis for a robot with three degrees of freedom[C]// Summer Computer Simulation Conference，July 27-30，1987，The Queen Elizabeth Hotel Montreal，Quebec，Canada．San Diego：Society for Computer Simulation International，1987：851-856．
[11] MERLET J P．Parallel robot[M]．2nd ed．Dordrecht：Springer Science & Business Media，2012．
[12] MOHAMMADI D H R，ZSOMBOR-MURRAY P J，ANGELES J．Singularity analysis of planar parallel mani pulators[J]．Mechanism and Machine Theory，1995，30(5)：665-678．
[13] GOSSELIN C M，SEFRIOUI J．Polynomial solutions for the direct kinematic problem of planar three degree of freedom parallel manipulators[C]// Advanced Robotics，1991．'Robots in Unstructured Environments'，91 ICAR．，Fifth International Conference on IEEE，Pisa，Italy Washington，DC：IEEE International Conference on IEEE，1991：1124-1129．
[14] GOSSELIN C，ANGELES J．A global performance index for the kinematic optimization of robotic manipu- lators[J]．Journal of Mechanical Design，1991，113(3)：220-226．
[15] NAGATSU Y，KATSURA S．Macro-micro bilateral control using Kalman filter based state observer for noise reduction and decoupling of modal space[C]// Industrial Electronics Society，IECON 2013-39th Annual Conference of the IEEE，November 10-13，2013，Vienna，Austria．Washington DC：IEEE，2013：4192-4197．
[16] 赵淳生．超声电机技术与应用[M]．北京：科学出版社，2007．ZHAO Chunsheng．Ultrasonic motor technologies and applications[M]．Beijing：Science Press，2007．
[17] 赵淳生，朱华．超声电机技术的发展和应用[J]．机械制造与自动化，2008(3)：1-9．ZHAO Chunsheng．ZHU Hua．Development and application of ultrasonic motors technologies[J]. Machinery Manufacturing and Automation，2008(3)：1-9．
[18] GOSSELIN C，ANGELES J．Singularity analysis of closed-loop kinematic chains[J]. Robotics and Auto- mation，IEEE Transactions on，1990，6(3)：281-290．