Laser Additive Manufacturing of Continuous Carbon Fiber Reinforced Composites

doi:10.3901/JME.2023.19.411

Abstract

Abstract: Carbon fiber-reinforced composites are widely used in aerospace, rail transportation, and new energy vehicles due to their low specific gravity and good mechanical and chemical properties. Compared to short fibers continuous fiber-reinforced composites have better properties, and the development of additive manufacturing provides an effective way to design and shape complex components of this material. This study focuses on four processes for laser additive manufacturing and laser-assisted additive manufacturing of continuous carbon fiber reinforced composites, including laser-assisted automated tape placement (L-ATP), laser-assisted laminated object manufacturing (L-LOM), laser-assisted fused deposition manufacturing (L-FDM), and robot-based laser additive manufacturing (R-LAM). The material design and preparation, forming principle, equipment, and process characteristics of laser additive manufacturing continuous carbon fiber reinforced composites are discussed in detail, and the application range, advantages, and disadvantages of four laser additive manufacturing continuous carbon fiber reinforced composites are compared, and the future development trend of carbon fiber composite additive manufacturing is prospected.

Key words: continuous carbon fiber, composite materials, laser additive manufacturing, robotic laser additive manufacturing

CLC Number:

TB34

YANG Lei, ZHOU Lei, LIN Yudong, OUYANG Zhen, YAN Chunze, SHI Yusheng. Laser Additive Manufacturing of Continuous Carbon Fiber Reinforced Composites[J]. Journal of Mechanical Engineering, 2023, 59(19): 411-428.

References

[1] BARILE C,CASAVOLA C,DE CILLIS F. Mechanical comparison of new composite materials for aerospace applications[J]. Composites Part B:Engineering,2019,162:122-128.
[2] LI H L,FIORE L,JIANG Z. Composite materials for primary aircraft structures:From development phase to high volume production rate[J]. Civ Aircr Des Res,2020,1,125-128.
[3] YANG D,CAO Y,ZHANG Z,et al. Effects of crystallinity control on mechanical properties of 3D-printed short-carbon-fiber-reinforced polyether ether ketone composites[J]. Polymer Testing,2021,97:107146.
[4] CHANG B,LI X,PARANDOUSH P,et al. Additive manufacturing of continuous carbon fiber reinforced poly-ether-ether-ketone with ultrahigh mechanical properties[J]. Polymer Testing,2020,88:106563.
[5] OROMIEHIE E,PRUSTY B G,COMPSTON P,et al. Automated fibre placement based composite structures:Review on the defects,impacts and inspections techniques[J]. Composite Structures,2019,224:110987.
[6] CARVELLI V,NISHIDA H,FUJII T,et al. Low velocity impact and CAI of woven carbon fibre reinforced highly polymerized thermoplastic epoxy modified with submicron diameter glass fibres[J]. Composite Structures,2020,236:111835.
[7] WANG F,WANG X,JIN X,et al. A comparison of cutting mechanisms of the carbon fibre reinforced thermoset and thermoplastic composites by the experimental and computational modelling methods[J]. Journal of Manufacturing Processes,2022,79:895-910.
[8] YAO C,QI Z,CHEN W,et al. Experimental study on CF/PEEK thermoplastic fastener:Effects of fastener matrix crystallinity and fibre content on the strength of single-lap joint[J]. Composites Part B:Engineering,2021,213:108737.
[9] 周晶晶. 连续碳纤增强热塑性复合材料制备及性能研究[D]. 大连:大连理工大学, 2019. ZHOU Jingjing. Preparation and properties of continuous carbon fiber reinforced thermoplastic composites[D]. Dalian:Dalian University of Technology, 2019.
[10] VAN DE WERKEN N,TEKINALP H,KHANBOLOUKI P,et al. Additively manufactured carbon fiber-reinforced composites:State of the art and perspective[J]. Additive Manufacturing,2020,31:100962.
[11] DEWADA S S,TELANG A. A review of recently developed polymer composite materials for fused deposition modeling 3D printing[J]. Materials Research Express,2021,8(12):122001.
[12] HEIDARI-RARANI M,RAFIEE-AFARANI M,ZAHEDI A M. Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites[J]. Composites Part B:Engineering,2019,175:107147.
[13] TIAN X,TODOROKI A,LIU T,et al. 3D Printing of continuous fiber reinforced polymer composites:Development,application,and prospective[J]. Chinese Journal of Mechanical Engineering:Additive Manufacturing Frontiers,2022,1(1):100016.
[14] ZHANG D,RUDOLPH N,WOYTOWITZ P. Reliable optimized structures with high performance continuous fiber thermoplastic composites from additive manufacturing (AM)[C]//Society for the Advancement of Material and Process Engineering,North Amercia:SAMPE,2019,20-23.
[15] LEE H,LIM C H J,LOW M J,et al. Lasers in additive manufacturing:A review[J]. International Journal of Precision Engineering and Manufacturing-Green Technology,2017,4(3):307-22.
[16] ÇELIK O,CHOUDHARY A,PEETERS D,et al. Deconsolidation of thermoplastic prepreg tapes during rapid laser heating[J]. Composites Part A:Applied Science and Manufacturing,2021,149:106575.
[17] NAKAGAWA Y,MORI K-I,YOSHINO M. Laser-assisted 3D printing of carbon fibre reinforced plastic parts[J]. Journal of Manufacturing Processes,2022,73:375-84.
[18] 塑料预浸料:术语定义和命名符号:GB/T 41488-2022[S]. 北京:国家市场监督管理总局,2022. Plastic prepreg:Definition of terms and naming symbols:GB/T 41488-2022[S]. Beijing:State Administration of Market Supervision and Administration,2022.
[19] 李蓓蓓,朱家强,李炜. 国内外展纱技术及装备研究进展[J]. 玻璃钢/复合材料, 2014(11):91-95. LI Beibei,ZHU Jiaqiang,LI Wei. Research progress of yarn spreading technology and equipment at home and abroad[J]. Fiberglass/Composite Materials,2014(11):91-95.
[20] WILSON S D R. Lateral spreading of fibre tows[J]. Journal of Engineering Mathematics,1997,32(1):19-26.
[21] 石亚琦. 连续碳纤维气流展纱流场仿真及装置研究[D]. 北京:北京化工大学,2021. SHI Yaqi. Simulation of flow field and device for continuous carbon fiber airflow yarn[D]. Beijing:Beijing University of Chemical Technology,2021.
[22] 徐挺,肖军,闫西涛. 超声辅助纤维束展纱效果研究[J]. 玻璃纤维, 2015(5):10-14. XU Ting,XIAO Jun,YAN Xitao. Research on the spreading effect of ultrasionic fiber spreading technology[J]. Fiber Glass,2015(5):10-4.
[23] 黄明君,翟建广. 热塑性树脂熔融浸渍连续碳纤维装置及工艺研究[J]. 塑料工业, 2016,44(11):74-8. HUANG Mingjun,ZHAI Jianguang. Device technology for impregnation of continuous carbon fiber roving with thermoplastic resin melt[J]. China Plastics Industry,2016,44(11):74-78.
[24] 华泽天,薛平,贾明印,等. 粉末浸渍法制备连续纤维增强热塑性复合材料研究进展[J]. 塑料科技, 2022,50(10):118-122. HUA Zetian,XUE Ping,JIA Mingyin,et al. Research progress of continuous fiber reinforced thermoplastic composites by powder impregnation[J]. Plastics Science and Technology,2022,50(10):118-122.
[25] 张哲. 液相浸渍-碳化法制备碳/碳复合材料的工艺优化及力学性能研究[D]. 西安:长安大学,2019. ZHANG Zhe. Study on process optimization and mechanical properties of carbon/carbon composites prepared by liquid impregnation-carbonization[D]. Xi'an:Chang`an University,2019.
[26] 许云鹏,颜春,刘东,等. 连续纤维增强热塑性预浸料制备工艺的研究进展[J]. 复合材料科学与工程, 2020(8):123-128. XU Yunpeng,YAN Chun,LIU Dong,et al. Rrogress in the preparation technology of continuous fiber reinforced thermoplastic prepregs[J]. Composites Science and Engineering,2020,2020(8):123-128.
[27] 唐可. 连续纤维增强热塑性复合材料制备及界面结合的研究[D]. 北京:北京化工大学,2015. TANG Ke. Preparation of continuous fiber reinforced thermoplastic composites and study on the interface[D]. Beijing:Beijing University of Chemical Technology,2015.
[28] 田小永,张亚园,刘腾飞,等. 连续碳纤维增强尼龙复合材料预浸丝制备与3D打印性能研究[J]. 航空制造技术, 2021,64(15):24-33. TIAN Xiaoyong,ZHANG Yayuan,LIU Tengfei,et al. Prepreg preparation and 3D printing of continuous carbon fiber reinforced nylon composite[J]. Aeronautical Manufacturing Technology,2021,64(15):24-33.
[29] CHEN X,WANG Y,LIU M,et al. Preparation and process parameter optimization of continuous carbon fiber-reinforced polycarbonate prepreg filament[J]. Polymers (Basel),2023,15(3).
[30] 梁宜楠. CF/PEEK点阵结构自动铺放原位成型工艺研究[D]. 大连:大连理工大学,2021. LIANG Yinan. Automatic fiber placement and in-situ consolidation process of CF/PEEK lattice structure[D]. Dalian:Dalian University of Technology,2021.
[31] 李根. 连续碳纤维-聚醚醚酮预浸带熔融浸渍制备方法研究[D]. 哈尔滨:哈尔滨工业大学,2021. LI Gen. Study on the preparation of continuous carbon fiber reinforced PEEK prepreg tapes through melt impregnation method[D]. Harbin:Harbin Institute of Technology,2021.
[32] 肖佳. 碳纤维编织复合材料层合板面内损伤机理的试验和数值研究[D]. 杭州:浙江理工大学,2022. XIAO Jia. Experimental and numerical study on in-plane compression failure mechanism of carbon fiber braided composite laminates[D]. Hangzhou:Zhejiang Sci-Tech University,2022.
[33] 谢铁秦. 碳纤维/酚醛树脂预浸料储存老化及其复合材料成型工艺研究[D]. 兰州:兰州交通大学,2019. XIE Tieqin. Storage aging of carbon fiber/phenolic resin prepreg and its composite forming process[D]. Lanzhou:Lanzhou Jiaotong University,2019.
[34] 王雨思. 先进复合材料自动铺带技术[J]. 塑料工业,2021,49(3):23-6. WANG Yusi. Automated tape laying for advanced composite materials[J]. China Plastics Industry,2021,49(3):23-6.
[35] YOUSEFPOUR A,HOJJATI M,IMMARIGEON J P. Fusion bonding/welding of thermoplastic composites[J]. Journal of Thermoplastic Composite Materials,2016,17(4):303-41.
[36] 朱文凯. 热塑性复合材料激光辅助加热自动铺放过程中温度场研究[D]. 南京:南京航空航天大学,2019. ZHU Wenkai. Study on thermal modelling of the laser-assisted thermoplastic tape placement process[D]. Nanjing:Nanjing University of Aeronautics and Astronautics,2019.
[37] HOSSEINI S M A,SCHÄKEL M,BARAN I,et al. Non-uniform crystallinity and temperature distribution during adjacent laser-assisted tape winding process of carbon/PA12 pipes[J]. The International Journal of Advanced Manufacturing Technology,2020,111(11-12):3063-82.
[38] CLANCY G,PEETERS D,O'HIGGINS R M,et al. In-line variable spreading of carbon fibre/thermoplastic pre-preg tapes for application in automatic tape placement[J]. Materials & Design,2020,194:108967.
[39] CLANCY G,PEETERS D,OLIVERI V,et al. A study of the influence of processing parameters on steering of carbon Fibre/PEEK tapes using laser-assisted tape placement[J]. Composites Part B:Engineering,2019,163:243-251.
[40] ZHANG C,DUAN Y,XIAO H,et al. The effects of processing parameters on the wedge peel strength of CF/PEEK laminates manufactured using a laser tape placement process[J]. The International Journal of Advanced Manufacturing Technology,2022,120(11-12):7251-7262.
[41] PARANDOUSH P,TUCKER L,ZHOU C,et al. Laser assisted additive manufacturing of continuous fiber reinforced thermoplastic composites[J]. Materials & Design,2017,131:186-95.
[42] 缪骞. 基于LOM技术薄木激光成型机理与实验研究[D]. 哈尔滨:东北林业大学,2020. MIAO Qian. Research on the mechanism and experimental of thin wood laser forming based on LOM technology[D]. Harbin:Northeast Forestry University,2020.
[43] ARANDOUSH P,LI X,CHANG B,et al. Additive manufacturing of continuous carbon fiber reinforced epoxy composite with graphene enhanced interlayer bond toward ultra-high mechanical properties[J]. Polym. Compos.,2022,43(2):934-945.
[44] PARANDOUSH P,ZHOU C,LIN D. 3D printing of ultrahigh strength continuous carbon fiber composites[J]. Advanced Engineering Materials,2019,21(2):1800622.
[45] PARANDOUSH P,FERNANDO P,ZHANG H,et al. A finishing process via ultrasonic drilling for additively manufactured carbon fiber composites[J]. Rapid Prototyping Journal,2021,27(4):754-768.
[46] PARANDOUSH P,DEINES T,LIN D,et al. Mechanical finishing of 3D printed continuous carbon fiber reinforced polymer composites via CNC machining[Z]. Volume 1:Additive Manufacturing; Manufacturing Equipment and Systems; Bio and Sustainable Manufacturing. 2019.10.1115/msec2019-2972
[47] WICKRAMASINGHE S,DO T,TRAN P. FDM-Based 3D printing of polymer and associated composite:A review on mechanical properties,defects and treatments[J]. Polymers (Basel),2020,12(7):1529.
[48] 王宗兴. 激光辅助两段式螺杆快速熔融沉积喷头的设计与研究[D]. 青岛:青岛大学,2021. WANG Zongxing. Design and study of laser-assisted two-stage screw rapid fusion deposition nozzle[D]. Qingdao:Qingdao University,2021.
[49] MING Y,XIN Z,ZHANG J,et al. Fabrication of continuous glass fiber-reinforced dual-cure epoxy composites via UV-assisted fused deposition modeling[J]. Composites Communications,2020,21:100401.
[50] CHEN Y,SHAN Z,YANG X,et al. Influence of preheating temperature and printing speed on interlaminar shear performance of laser-assisted additive manufacturing for CCF/PEEK composites[J]. Polymer Composites,2022,43(6):3412-3425.
[51] LUO M,TIAN X,ZHU W,et al. Controllable interlayer shear strength and crystallinity of PEEK components by laser-assisted material extrusion[J]. Journal of Materials Research,2018,33(11):1632-1641.
[52] HAN P,TOFANGCHI A,ZHANG S,et al. Effect of in-process laser interface heating on strength isotropy of extrusion-based additively manufactured PEEK[J]. Procedia Manufacturing,2020,48:737-742.
[53] RAHMAN M A,ISLAM M Z,GIBBON L,et al. 3D printing of continuous carbon fiber reinforced thermoset composites using UV curable resin[J]. Polymer Composites,2021,42(11):5859-5868.
[54] ZHANG Z,LONG Y,YANG Z,et al. An investigation into printing pressure of 3D printed continuous carbon fiber reinforced composites[J]. Composites Part A:Applied Science and Manufacturing,2022,162:107162.
[55] MANTHA C,CLARA S. Alleviating torsional forces on fiber-reinforced thermoplastic filament:US,10046511[P]. 2018-08-14.
[56] ARMIJO A,DIEGO S,BHEDA H,et al. Systems for additive manufacturing using feedstock shaping:US,10703042[P]. 2020-07-07.
[57] KASHIKAR A,VIEW M,MONDESIR W,et al. Methods and apparatus for controlling motion of an articulated robot:US,10857667[P]. 2020-12-08.
[58] NICKELS L. Carbon fiber 3D printing propels bike development[J]. Reinforced Plastics,2019,63(2):93-96.
[59] 闫春泽,欧阳震,杨磊,等. 连续纤维复材层间增强的机器人辅助激光增材制造系统:中国,CN202310021081.2[P]. 2023-04-18. YAN Chunze,OUYANG Zhen,YANG Lei,et al. Robot-assisted laser additive manufacturing system for continuous fiber composite interlayer reinforcement:China,CN202310021081.2[P]. 2023-04-18.
[60] 闫春泽,欧阳震,杨磊,等. 一种机器人辅助激光增材制造系统及其控制方法:中国,CN202310020688.9[P]. 2023-04-28. YAN Chunze,OUYANG Zhen,YANG Lei,et al. A robot-assisted laser additive manufacturing system and its control method:China,CN202310020688.9[P]. 2023-04-28.
[61] 闫春泽,聂翔,杨磊,等. 一种基于机器人激光增材制造的增强SiC复合材料制备方法:中国,CN202111663002.5[P]. 2022-04-08. YAN Chunze,NIE Xiang,YANG Lei,et al. A method for preparing reinforced SiC composites based on robotic laser additive manufacturing:China,CN202111663002.5[P]. 2022-04-08.
[62] 闫春泽,杨磊,胡殿刚,等. 一种具有剪断和辊压装置的激光增材制造系统:中国,CN202111105807.8[P]. 2022-12-02. YAN Chunze,YANG Lei,HU Diangang,et al. A laser additive manufacturing system with shearing and roller pressing device:China,CN202111105807.8[P]. 2022-12-02.
[63] BRENKEN B,BAROCIO E,FAVALORO A,et al. Fused filament fabrication of fiber-reinforced polymers:A review[J]. Additive Manufacturing,2018,21:1-16.
[64] URHAL P,WEIGHTMAN A,DIVER C,et al. Robot assisted additive manufacturing:A review[J]. Robotics and Computer-Integrated Manufacturing,2019,59:335-345.
[65] HU Z,HUA L,QIN X,et al. Region-based path planning method with all horizontal welding position for robotic curved layer wire and arc additive manufacturing[J]. Robotics and Computer-Integrated Manufacturing,2022,74:102286.
[66] SHAH A. Emerging trends in robotic aided additive manufacturing[J]. Materials Today:Proceedings,2022,62:7231-7237.
[67] HOSSEINI S M A,BARAN I,VAN DRONGELEN M,et al. On the temperature evolution during continuous laser-assisted tape winding of multiple C/PEEK layers:The effect of roller deformation[J]. International Journal of Material Forming,2020,14(2):203-21.
[68] COMER A J,RAY D,OBANDE W O,et al. Mechanical characterisation of carbon fibre-PEEK manufactured by laser-assisted automated-tape-placement and autoclave[J]. Composites Part A:Applied Science and Manufacturing,2015,69:10-20.
[69] MIAO Q,DAI Z,MA G,et al. Effect of consolidation force on interlaminar shear strength of CF/PEEK laminates manufactured by laser-assisted forming[J]. Composite Structures,2021,266:113779.
[70] WU D,MIAO Q,DAI Z,et al. Effect of voids and crystallinity on the interlaminar shear strength of in-situ manufactured CF/PEEK laminates using repass treatment[J]. Composites Science and Technology,2022,224:109228.
[71] ZHAO D,CHEN J,ZHANG H,et al. Effects of processing parameters on the performance of carbon fiber reinforced polyphenylene sulfide laminates manufactured by laser-assisted automated fiber placement[J]. Journal of Composite Materials,2021,56(3):427-439.
[72] LUO M,TIAN X,SHANG J,et al. Impregnation and interlayer bonding behaviours of 3D-printed continuous carbon-fiber-reinforced poly-ether-ether-ketone composites[J]. Composites Part A:Applied Science and Manufacturing,2019,121:130-138.
[73] NAKAGAWA Y,MORI K-I,MAENO T. 3D printing of carbon fibre-reinforced plastic parts[J]. The International Journal of Advanced Manufacturing Technology,2017,91(5-8):2811-2817.
[74] YANG C,TIAN X,LIU T,et al. 3D printing for continuous fiber reinforced thermoplastic composites:Mechanism and performance[J]. Rapid Prototyping Journal,2017,23(1):209-215.
[75] TIAN X,LIU T,YANG C,et al. Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites[J]. Composites Part A:Applied Science and Manufacturing,2016,88:198-205.
[76] HAO W,LIU Y,ZHOU H,et al. Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites[J]. Polymer Testing,2018,65:29-34.
[77] 王显峰,段少华,唐珊珊,等. 复合材料自动铺放技术在航空航天领域的研究进展[J]. 航空制造技术,2022,65(16):64-77. WANG Xianfeng,DUAN Shaohua,TANG Shanshan,et al. Progress of composite automated placement technology in aviation field[J]. Aeronautical Manufacturing Technology,2022,65(16):64-77.
[78] PAPPAS J M,THAKUR A R,LEU M C,et al. A comparative study of pellet-based extrusion deposition of short,long,and continuous carbon fiber-reinforced polymer composites for large-scale additive manufacturing[J]. Journal of Manufacturing Science and Engineering,2021,143(7).
[79] AZAROV A V,ANTONOV F K,GOLUBEV M V,et al. Composite 3D printing for the small size unmanned aerial vehicle structure[J]. Composites Part B:Engineering,2019,169:157-63.
[80] GOH G D A S,GOH G L. Additive manufacturing in unmanned aerial vehicles (UAVs):Challenges and potential[J]. Aerospace Science and Technology,2017,63:140-151.