THEORY OF REDUCING CHATTER WITH SEPARATING TYPE ULTRASONIC VIBRATION CUTTING

›› 1994, Vol. 30 ›› Issue (4): 16-22.

• Article • Previous Articles Next Articles

THEORY OF REDUCING CHATTER WITH SEPARATING TYPE ULTRASONIC VIBRATION CUTTING

Yu Jin

State Key Laboratory of Applied optics. Changchun Institute of optics and Fine Mechanics, Chinese Academy of sciences

Published:1994-07-01

Abstract

Abstract: The dynamic cutting force characteristic in the separating type ultrasonic vibration cutting (UVC) is analysed. A theory of chatter suppression with the separating type UVC is proposed, and its physical reason and cutting dynamics are verified by my test results.

Key words: Chatter, Dynamics, Ultrasonic, Vibration cutting, Automobile covering mould, Cutting tools, Dynamics, Hardened steel mould, NC milling

Yu Jin. THEORY OF REDUCING CHATTER WITH SEPARATING TYPE ULTRASONIC VIBRATION CUTTING[J]. , 1994, 30(4): 16-22.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1994/V30/I4/16

[1]	LIAN Zhijia, LU Jianwei, WEI Heng, ZHU Yingjie, WANG Shenping, LI Chongbing. Transient Dynamic Response Characteristics of Tires at μ-step Road Boundaries and Modeling [J]. Journal of Mechanical Engineering, 2026, 62(8): 60-70.
[2]	XU Yinggang, ZHU Zheng, YE Xiaoming, WANG Xiangyu, LI Liang, LAI Feng, WEI Heng. Estimation of the Clamping Force of the Electromechanical Brake Caliper During ABS Intervention [J]. Journal of Mechanical Engineering, 2026, 62(8): 169-179.
[3]	GUO Lie, GUAN Longxin, GE Pingshu, WU Xiaojian. Review on Longitudinal-lateral Motion Control of Intelligent Vehicles with Network Unreliability [J]. Journal of Mechanical Engineering, 2026, 62(8): 298-316.
[4]	AN Haitao, JIA Botao, WANG Liang, WU Jintao, PAN Song, ZHAO Gai. Dynamics Simulation Analysis and Extreme Environment Test Research of Space Hollow-type Ultrasonic Motor [J]. Journal of Mechanical Engineering, 2026, 62(7): 269-283.
[5]	XIA Ziwen, SHAN Chenwei, ZHANG Mengmeng, LIU Wengang, CUI Minchao, LUO Ming. Influence of Elliptical Ultrasonic Vibration Milling on Cutting Characteristics and Subsurface Mechanical Properties of GH4169 [J]. Journal of Mechanical Engineering, 2026, 62(7): 439-451.
[6]	WEI Zhaocheng, ZENG Wen, SHI Ning, FANG Yuxin, LI Jiasheng, GUO Minglong. Development of a Highly Repeatable Control Method Based on Ultrasonic Stress Measurement and Its Application [J]. Journal of Mechanical Engineering, 2026, 62(6): 209-219.
[7]	YANG Yinru, GAO Hang, TIAN Yachuang, LIU Jianbao. Experimental Study on Ultrasonic Welding Technology of High Temperature Resistant Thermoplastic Carbon Fiber Composites [J]. Journal of Mechanical Engineering, 2026, 62(5): 297-305.
[8]	BAI Zhaoruo, HUANG Kanghua, TANG Mingjun, FENG Shulong, FENG Feng, ZHANG Jianfu, FENG Pingfa, ZHANG Xiangyu. A Controllable High-precision High-speed Ultrasonic Peening Method for Hole Chamfer and the Analysis of Surface Integrity [J]. Journal of Mechanical Engineering, 2026, 62(5): 434-442.
[9]	LIN Shuilin, HU Bowen, SUN Jianliang, PENG Yan. Dynamic Modeling and Response Analysis of Defective Four-row Roller Bearings in Rolling Mills under Multi-load Excitation [J]. Journal of Mechanical Engineering, 2026, 62(4): 12-24.
[10]	ZHANG Yanjie, XU Zhihui, LI Yu, WANG Tao, YANG Quan, JIANG Ruipeng, WANG Wei. Research on Rapid Photoacoustic Imaging Method of Corrugated Composite Plate Interface Based on Adaptive Compressive Sensing [J]. Journal of Mechanical Engineering, 2026, 62(4): 61-74.
[11]	LIU Xiaohui, LIU Qingdong. Interaction Between Migrating Curved Gran Boundary and Void Via Molecular Dynamics Simulations [J]. Journal of Mechanical Engineering, 2026, 62(4): 118-125.
[12]	HAN Bingyuan, ZHAO Mengna, DU Wenbo, ZHAO Yonglin, YANG Jun, LI Han, ZHU Sheng. Current Status of Research on Surface Free Energy Modulation of Solid Lubricating Films and Its Effect on Tribological Properties [J]. Journal of Mechanical Engineering, 2026, 62(4): 233-248.
[13]	HU Xiguang, WU Defa, LIU Hanhui, LI Jiangxiong, JIANG Jize, LIU Yinshui. Analysis of Flow Characteristics of Submerged Water Jet Nozzle [J]. Journal of Mechanical Engineering, 2026, 62(4): 318-327.
[14]	LIU Suyan, DONG Yilin, QIAO Yiming, MA Zengqiang. Research on Dynamic Fault Injection of Bearing Digital Twin Model Based on Improved Dung Beetle Optimization Algorithm [J]. Journal of Mechanical Engineering, 2026, 62(3): 446-457.
[15]	HAN Wenkang, ZHAO Jinfu, LIU Zhanqiang, WANG Bing, WANG Pengyang, SONG Qinghua, REN Xiaoping, WANG Zhaoxin. Review of Temperature Measurement Methods Based on Thermoelectric Sensors and Current Status of Their Application in Intelligent Cutting Tools [J]. Journal of Mechanical Engineering, 2026, 62(2): 17-34.

THEORY OF REDUCING CHATTER WITH SEPARATING TYPE ULTRASONIC VIBRATION CUTTING

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments