INVESTIGATION ON CUBIC BORON NITRIDE CUTTING TOOL MADE FROM HIGH PRESSURE COMBUSTION SYNTHESIS

›› 1994, Vol. 30 ›› Issue (4): 12-15.

• Article • Previous Articles Next Articles

INVESTIGATION ON CUBIC BORON NITRIDE CUTTING TOOL MADE FROM HIGH PRESSURE COMBUSTION SYNTHESIS

Yin Sheng;Luo Zhenbi

University of Science and Technology Beijing Qinghua University

Published:1994-07-01

Abstract

Abstract: Cubic boron nitride (CBN) cutting tool made from high pressure combustion synthesis exhibits good toughness and strength, and shows good performance and long tool life used to kinds of difficult-to-cut material. It can be used in interrupted cutting and roughing cut.

Key words: Boron nitride (BN), Combustion, Cutting performance, Cutting tool, High pressure, synthesis

Yin Sheng;Luo Zhenbi. INVESTIGATION ON CUBIC BORON NITRIDE CUTTING TOOL MADE FROM HIGH PRESSURE COMBUSTION SYNTHESIS[J]. , 1994, 30(4): 12-15.

[1]	ZHAO Xikun, LI Congbo, YANG Yong, Lü Yan, JIANG Shuyan. A Data and Model Hybrid Driven Cutting Parameter Energy-efficiency Optimization Method for Flexible Machining Process Considering Cutting Tool Flexibility [J]. Journal of Mechanical Engineering, 2024, 60(7): 236-248.
[2]	ZHAO Ping, ZHANG Yating, CHENG Yue, XU Hongwei, ZI Bin. Multi-task Trajectory Synthesis Method of Single-DOF Stephenson Mechanisms Based on Sensitivity Analysis [J]. Journal of Mechanical Engineering, 2024, 60(5): 59-69.
[3]	YANG Shucai, HAN Pei, TONG Xin, LIU Xianli, ZHANG Xiaohui. Research on Tool Mesoscopic Geometric Feature Forming Technology and Its Function [J]. Journal of Mechanical Engineering, 2024, 60(5): 317-351.
[4]	CHENG Haiying, LI Xuan, ZHANG Yong. Numerical Simulation and Air Distribution Parameters Optimization for Pulverized Coal Burner of Aggregate Drying [J]. Journal of Mechanical Engineering, 2024, 60(20): 289-299.
[5]	ZHU Yongchao, ZHU Caichao, TAN Jianjun, RAN Feng, SONG Chaosheng. Health Status Prediction of Wind Turbine Gearbox Cluster Considering Data Distribution Discrepancy [J]. Journal of Mechanical Engineering, 2024, 60(18): 64-75.
[6]	JIN Xianjian, WANG Jiadong, XU Liwei, YAN Zeyuan, LU Yanbo, YIN Guodong, CHEN Nan. μ-Synthesis Robust Control for Active Suspension of In-wheel-motor-driven Electric Vehicles [J]. Journal of Mechanical Engineering, 2024, 60(16): 259-269.
[7]	HUANG Peng, LI Changshuo, DING Huafeng, CHEN Ziming, ZHAO Yuqian. Structural Synthesis and Optimization of the Hydraulic Loader Working Device [J]. Journal of Mechanical Engineering, 2024, 60(1): 220-234.
[8]	FENG Bohua, LUAN Zhiqiang, ZHANG Ruochong, XIA Yu, YAO Weiqiang, HU Xiaodong, XU Xuefeng. Experimental Study on Influence Mechanism of Electroosmotic Effect on the Penetration and Lubrication of Water-based Cutting Fluid at Tool-chip Interface [J]. Journal of Mechanical Engineering, 2023, 59(9): 320-334.
[9]	CHEN Yonghua, SUN Zhenguo, ZHANG Wen, CHEN Qiang. Research on High Efficiency Weld Modification Technology for Wall-climbing Robot [J]. Journal of Mechanical Engineering, 2023, 59(9): 12-19.
[10]	LI Zhaotong, YANG Yuwei, LI Bin, ZHAO Lei, LIU Liang, MA Yue, LIU Qi. A New Type of Knee Exoskeleton Bionic Metamorphic Robot and Its Optimal Dimensional Synthesis Based on Multi-body Kinematics [J]. Journal of Mechanical Engineering, 2023, 59(5): 142-155.
[11]	CHU Hongpeng, QI Bai, WANG Huiqi, QIU Xuesong, ZHOU Yulin. 6-DOF Wheeled Parallel Robot and Its Design Method [J]. Journal of Mechanical Engineering, 2023, 59(3): 46-53.
[12]	YE Wenchang, GUO Bicheng, DENG Zhaohui, WANG Wei, ZOU Lingli, LIU Chao, YIN Ganggang, JIANG Feng. Advances in Key Technologies of the Intelligence Tool [J]. Journal of Mechanical Engineering, 2023, 59(23): 265-282.
[13]	LI Mingxing, YUE Caixu, LIU Xianli, CHEN Zhitao, JIANG Zhipeng, YUE Daxun, STEVEN Y L. Research on Design and Application of Endmill for Milling Titanium Alloy Frame Parts [J]. Journal of Mechanical Engineering, 2023, 59(23): 283-309.
[14]	JIA Zhenyuan, FU Rao, WANG Fuji. Research Advance Review of Machining Technology for Carbon Fiber Reinforced Polymer Composite Components [J]. Journal of Mechanical Engineering, 2023, 59(19): 348-374.
[15]	LI Haihong, DONG Jinan, GUO Shanguo, LIU Zhiqi. Analysis and Design Method for Non-uniform Parallel Mechanism Structure of Dynamic/Static Platform [J]. Journal of Mechanical Engineering, 2023, 59(17): 116-125.

INVESTIGATION ON CUBIC BORON NITRIDE CUTTING TOOL MADE FROM HIGH PRESSURE COMBUSTION SYNTHESIS

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments