State of the Art in Innovative Design of Surface Texture

doi:10.3901/JME.2015.23.084

Abstract

Abstract: Over the past decade, surface texture has received a significant boost in the field of interfacial science since it is proven to be an effective means to improve the properties of interface. The modern micro-machining technology makes it possible to optimize the interface performance by precisely controlling the shape and dimensions of surface texture. The understandings of the principles of bio-systems provide novel concepts and ideas for surface texture design. The discovery on the mechanisms of surface texture enhances the development of surface texture for different applications in industrial fields. Currently, surface texture has been involved in reducing friction, anti-wear, increasing friction, reducing vibration, anti-adhesion, anti-creeping etc. TRIZ is a theory of inventive problem solving, which indicates the objective existence of methodology and principles of innovation process. By mastering the methodology and principles, the innovative designing process could be promoted, and the results could be predictable and controllable. The research progresses of surface texture are reviewed, analyzed, and prospected based on TRIZ theory.

Key words: friction, lubrication, surface texture, TRIZ theory, wear

WANG Jingqiu, WANG Xiaolei. State of the Art in Innovative Design of Surface Texture[J]. Journal of Mechanical Engineering, 2015, 51(23): 84-95.

References

[1] ETSION I. State of the art in laser surface texturing[J]. Journal of Tribology Transactions of the ASME，2005，127：248-253.
[2] YU Haiwu，HUANG Wei，WANG Xiaolei. Dimple patterns design for different circumstances [J]. Lubrication Science，2013，25：67-78.
[3] TANG Wei，ZHOU Yuanhai，ZHU Hua，et al. The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contact[J]. Applied Surface Science，2013，273：199-204.
[4] HUANG Wei，WANG Xialei. Biomimetic design of elastomer surface pattern for friction control under wet conditions[J]. Bioinspiration & Biomimetics，2013，8(4)： 046001.
[5] 汪久根，陈仕洪. Koch雪花表面织构设计与高铁空气摩擦噪声分析[J]. 机械工程学报，2014，50(7)：78-83.WANG Jiugen，CHEN Shihong. Bionic design of Koch snowflake surface texture and its effects on air frictional noise of high speed train[J]. Journal of Mechanical Engineering，50(7)：78-83.
[6] MO J L，WANG Z G， CHEN G X，et al. The effect of groove-textured surface on friction and wear and friction-induced vibration and noise[J]. Wear，2013，301(1-2)：671-681.
[7] 王东伟，莫继良，王正国，等. 沟槽织构化表面影响摩擦振动噪声机理[J]. 机械工程学报，2013，49(23)： 112-116.WANG Dongwei，MO Jiliang，WANG Zhengguo，et al. Mechanism of the effect of groove-textured surface on the friction vibration and noise[J]. Journal of Mechanical Engineering，2013，49(23)：112-116.
[8] WANG Yue，HU Hong，SHAO Jinyou，et al. Fabrication of well-defined mushroom-shaped structures for biomimetic dry adhesive by conventional photolithography and molding[J]. ACS Appl. Mater. Interfaces，2014，6(4)：2213-2220.
[9] DAI Qingwen，HUANG Wei，WANG Xiaolei. Surface roughness and orientation effects on the thermo-capillary migration of a droplet of paraffin oil[J]. Experimental Thermal and Fluid Science，2014，57：200-206.
[10] BRUZZONE A A G，COSTA H L，LONARDO P M， et al. Advances in engineered surfaces for functional performance[J]. CIRP Annals Manufacturing Technology，2008，57：750-769.
[11] EVANS C J，BRYAN J B. "Structured"，"Textured" or "Engineered" surfaces[J]. Annals of the CIRP，1999，48(2)：541-556.
[12] WILLIS E. Surface finish in relation to cylinder liners[J]. Wear，1986，109(1-4)：351-366.
[13] ASTRENE T T. 20 minutes with Dr. Izhak Etsion[J]. Tribology & Lubrication Technology，2010，10：17-20.
[14] 高橋秀和. メカニカルシールの市場と動向[J]. トライボロジ，1998(10)：34-37.TAKAHASHI H. Present state and future trend in mechanical seal technology[J]. Journal of Japanese Society of Trobologists，1998(10)：34-37.
[15] TOMANIK E. Friction and wear bench tests of different engine liner surface finishes[J]. Tribology International， 2008，41：1032-1038.
[16] COBLAS D G，FATU A，MAOUI A，et al. Manufacturing textured surfaces：State of art and recent developments[J]. Proceedings of the Institution of Mechanical Engineers，Part J：Journal of Engineering Tribology，2014，229(1)：3-29.
[17] PETTERSSON U，JACOBSON S. Tribological texturing of steel surfaces with a novel diamond embossing tool technique[J]. Tribology International，2006，39：695-700.
[18] WAKUDA M，YAMAUCHI Y，KANZAKI S. Effect of workpiece properties on machinability in abrasive jet machining of ceramic materials[J]. Precision Engineering，2002，26(2)：193-198.
[19] DENKENA B，K?HLER J， K?STNER J， et al. Efficient machining of microdimples for friction reduction[J]. Journal of Micro and Nano-Manufacturing，2013，1(1)：011003.
[20] WANG Xiaolei，KATO K，ADACHI K，et al. Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water[J]. Tribology International，2003，36(3)：189-197.
[21] 刘莹，陈大融，杨文言. 轧辊表面微凸体形貌激光毛化技术的试验研究[J]. 机械工程学报，2003，39(7)： 107-110.LIU Ying，CHEN Darong，YANG Wenyan. Experimental investigation of laser-textured on roller with micro-convex topography[J]. Chinese Journal of Mechanical Engineering，2003，39(7)：107-110.
[22] 符永宏，叶云霞，张永康，等. 用于显著改善摩擦副润滑状态的激光晰磨技术[J]. 机械工程学报，2002，38(8)：115-117.FU Yonghong，YE Yunxia，ZHANG Yongkang，et al. Technology of laser honing applied in distinctively improving the lubrication of frictional units[J]. Chinese Journal of Mechanical Engineering，2002，38(8)：115-117.
[23] ZHOU Y Q，SHAO T M，YIN L. A method of micro laser surface texturing based on optical fiber focusing[J]. Laser Physics，2009，19(5)：1061-1066.
[24] 刘一静，袁明超，王晓雷. 表面机构对发动机活塞/缸套摩擦性能的影响[J]. 中国矿业大学学报，2009，38(6)：872-877.LIU Yijing，YUAN Mingchao，WANG Xiaolei. Influence of the surface texture on the tribological performances of piston skirt/ liner[J]. Journal of China University of Mining & Technology，2009，38(6)：872-877.
[25] HAN J，FANG L，SUN J，et al. Hydrodynamic lubrication of microdimple textured surface using three-dimensional CFD[J]. Tribology Transactions，2010，53(6)：860-870.
[26] 张金煜，孟永钢. 推力滑动轴承表面织构的优化设计[J]. 机械工程学报，2012，48(17)：91-99.ZHANG Jinyu，MENG Yonggang. Optimal design of surface texture in parallel thrust bearings[J]. Journal of Mechanical Engineering，2012，48(17)：91-99.
[27] 尹必峰，卢振涛，刘胜吉，等. 缸套表面织构润滑性能理论及试验研究[J]. 机械工程学报，2012，48(21)：91-96.YIN Bifeng，LU Zhentao，LIU Shengji. Theoretical and experimental research on lubrication performance of laser surface texturing cylinder liner[J]. Journal of Mechanical Engineering，2012，48(21)：91-96.
[28] 马晨波，华朱，孙见君. 基于CFD分析的表面织构润滑计算适用方程研究[J]. 机械工程学报，2011，47(15)：95-106. MA Chenbo，HUA Zhu，SUN Jianjun. Applicable equation study of lubrication calculation of surface texture based on CFD analysis[J]. Journal of Mechanical Engineering，2011，47(15)：95-106.
[29] SUH N P，MOSLEH M，HOWARD P S. Control of friction[J]. Wear，1994，175(1-2)：151-158.
[30] LO S W，HORNG T C. Lubricant permeation from micro oil pits under intimate contact condition[J]. Journal of Tribology-Transactions of the ASME，1999，121(4)：633-638.
[31] WANG Xiaolei，KATO K. Improving the anti-seizure ability of SiC seal in water with RIE texturing[J]. Tribology Letters，2003，14(4)：275-280.
[32] 李兵，刘焜，王静，等. 线接触滑—滚条件下微凹坑表面摩擦特性[J]. 机械工程学报，2011，47(21)：91-96.LI Bing，LIU Kun，WANG Jing，et al. Micro cavity’s tribological property under line contact and sliding-rolling conditions[J]. Journal of Mechanical Engineering，2011，47(21)：91-96.
[33] 李媛，刘小君，张彦，等. 面接触条件下织构表面摩擦特性研究[J]. 机械工程学报，2012，48(19)：109-115.LI Yuan，LIU Xiaojun，ZHANG Yan，et al. Frictional properties of textured surfaces under plane contact[J]. Journal of Mechanical Engineering，2012，48(19)：109-115.
[34] BAUMGART P，KRAJNOVICH D J，NGUYEN T A，et al. A new laser texturing technique for high-performance magnetic disk drives[J]. IEEE Transactions on Magnetics，1995，31(6)：2946-2951.
[35] ZHOU L，KATO K，UMEHARA N，et al. Friction and wear properties of hard coating materials on textured hard disk sliders[J]. Wear，2000，243(1-2)：133-139.
[36] TONDER K. Hydrodynamic effects of tailored inlet roughnesses：Extended theory[J]. Tribology International， 2004，37(2)：137-142.
[37] FOWELL M， OLVER A V， GOSMAN A D，et al. Entrainment and inlet suction：Two mechanisms of hydrodynamic lubrication in textured bearings[J]. Journal of Tribology，2007，129：336-347.
[38] ZHANG J，MENG Y. Direct observation of cavitation phenomenon and hydrodynamic lubrication analysis of textured surfaces[J]. Tribology Letters，2012，46(2)：147-158.
[39] NAKANO M，KORENAGA A，KORENAGA A，et al. Applying micro-texture to cast iron surfaces to reduce the friction coefficient under lubricated conditions[J]. Tribology Letters，2007，28：131-137.
[40] 白少先，柏林清，孟祥铠，等. 倾斜微孔密封端面气体润滑动压效应试验研究[J]. 中国机械工程，2013，24(6)：831-835.BAI Shaoxian，BAI Linqing，MENG Xiangkai，et al. Experimental research on hydrodynamic effect of inclined micro-pored gas face seals[J]. China Mechanical Engineering，2013，24(6)：831-835.
[41] MENG X，BAI S，PENG X. Lubrication film flow control by oriented dimples for liquid lubricated mechanical seals[J]. Tribology International，2014，77：132-141.
[42] YUAN Sihuan，HUANG Wei，WANG Xiaolei. Orientation effects of micro-grooves on sliding surfaces[J]. Tribology International，2011，44(9)：1047-1054.
[43] WANG Xiaolei，WANG Jingqiu，ZHANG Bo，et al. Design principles for the area density of dimple patterns[J]. Proceedings of the Institution of Mechanical Engineers，Part J：Journal of Engineering Tribology，2015，229(4)：538-546
[44] MA C，BAI S，MENG Y，et al. Hydrophilic control of laser micro-square-convexes SiC surfaces[J]. Materials Letters，2013，109：316-319.
[45] 戴振东，佟金，任露泉. 仿生摩擦学研究及发展[J]. 科学通报，2006，51(20)：2353-2359.DAI Zhendong，TONG Jin，REN Luquan. Researches and developments of biomimetics in tribology[J]. Chinese Science Bulletin，2006，51(20)：2353-2359.
[46] CLARKE I C. Human articular surface contours and related surface depression frequency studies[J]. Annals of the Rheumatic Diseases，1971，30(15)：15-23.
[47] BECHERT D W，BRUSE M，HAGE W，et al. Fluid mechanics of biological surfaces and their technological application[J]. Naturwissenschaften，2000，87：157-171.
[48] FEDERLE W，BARNES W，BAUMGARTNER W，et al. Wet but not slippery：Boundary friction in tree frog adhesive toe pads[J]. Journal of the Royal Society Interface，2006，3(10)：689-697.
[49] ALTSHULLER G S. Creativity as an exact science：The theory of the solution of inventive problems[M]. New York：Gordon and Breach Science Publishers，1984.
[50] 沈萌红. TRIZ理论及创新实践[M]. 北京：机械工业出版，2012. SHEN Menghong. TRIZ theory and innovative practice[M]. Beijing：China Machine Press，2012.
[51] WANG Xiaolei，ADACHI K，OTSUKA K，et al. Optimization of the surface texture for silicon carbide sliding in water[J]. Applied Surface Science，2006，253(3)：1282-1286.
[52] SCHMID J. Friction optimization of cylinder surfaces from the perspective of production technology[J]. MTZ，2010，71：18-23.
[53] DING Q，WANG L，WANG Y，et al. Improved tribological behavior of DLC films under water lubrication by surface texturing[J]. Tribology Letters，2011，41(2)：439-449.
[54] DING Q，WANG L，HU L，et al. The pairing-dependent effects of laser surface texturing on micro tribological behavior of amorphous carbon film[J]. Wear，2012，274-275：43-49.
[55] PIMENTEL J V，POLCAR T，CAVALEIRO A. Structural，mechanical and tribological properties of Mo–S–C solid lubricant coating[J]. Surface and Coatings Technology，2011，205(10)：3274-3279.
[56] RAPOPORT L，MOSHKOVICH A，PERFILYEV V，et al. Friction and wear of MoS2 films on laser textured steel surfaces[J]. Surface & Coatings Technology，2008，202(14)：3332-3340.
[57] LI J，XIONG D， ZHANG Y，et al. Friction and wear properties of MoS2-overcoated laser surface-textured silver-containing nickel-based alloy at elevated temperatures[J]. Tribology Letters，2011，43(2)：221-228.
[58] LI J，XIONG D，WU H，et al. Tribological properties of laser surface texturing and molybdenizing duplex-treated stainless steel at elevated temperatures[J]. Surface and Coatings Technology，2013，228：S219-S223.
[59] VOEYODIN A A，ZABINSKI J S. Laser surface texturing for adaptive solid lubrication[J]. Wear，2006，261(11-12)：1285-1292.
[60] 蒲吉斌，万善宏，胡天昌，等. 离子液体/织构化类金刚石碳复合润滑薄膜的构筑及其摩擦学性能的研究[J]. 摩擦学学报，2012，32(5)：472-479.PU Jibin，WAN Shanhong，HU Tianchang，et al. Fabrication and tribological study of ionic liquid/texturing diamond-like carbon composite lubrication films[J]. Tribology，2012，32(5)：472-479.
[61] RAMACHANDAR S，OVAERT T C. Effect of coating geometry on contact stresses in two-dimensional discontinuous coatings[J]. Journal of Tribology，2000，122：665-671.
[62] ZHANG Bo，HUANG Wei，WANG Jingqiu，et al. Comparison of the effects of surface texture on the surfaces of steel and UHMWPE[J]. Tribology International，2013，65：138-145.
[63] NAKANO M，MIYAKE K，KORENAGA A，et al. Tribological properties of patterned NiFe-covered Si surfaces[J]. Tribology Letters，2009，35：133-139.
[64] 姜亮，马国亮，王晓雷. PDMS表面织构润滑特性的研究[J]. 摩擦学学报，2010，30(3)：262-267. JIANG Liang，MA Guoliang，WANG Xiaolei. Lubrication properties of surface texture on PDMS[J]. Tribology，2010，30(3)：262-267.
[65] HUANG Wei，JIANG Liang，ZHOU Congxi，et al. The lubricant retaining effect of micro-dimples on the sliding surface of PDMS[J]. Tribology International，2012，52：87-93.
[66] 董慧芳，刘焜，王伟，等. 激光加工微凹坑轴表面对唇形密封泵吸及摩擦特性的影响[J]. 摩擦学学报，2012，32(2)：126-132. DONG Huifang，LIU Kun，WANG Wei，et al. Laser textured shaft surfaces on the pumping action and frictional properties of lip seals[J]. Tribology，2012，32(2)：126-132.
[67] HADINATA P，STEPHENS L. Soft elastohydrodynamic analysis of radial lip seals with deterministic microasperities on the shaft[J]. Journal of Tribology，2007，129：851-859.
[68] 于海武，邓海顺，黄巍，等. 微凹坑相对位置变化对表面减摩性能的影响[J]. 中国矿业大学学报，2011，40(6)：943-948.YU Haiwu，DENG Haishun，HUANG Wei，et al. Effects of micro-dimple arrangements on tribological performance of sliding surfaces[J]. Journal of China University of Mining & Technology，2011，40(6)：943-948.
[69] YAGI K，SUGIMURA J. Elastohydrodynamic simulation of Rayleigh step bearings in thin film hydrodynamic lubrication[J]. Tribology International，2013，64：204-214.
[70] ZHOU Y，ZHU H，TANG W，et al. Development of the theoretical model for the optimal design of surface texturing on cylinder liner[J]. Tribology International，2012，52：1-6.
[71] YU Haiwu，WANG Xiaolei，ZHOU Fei. Geometric shape effects of surface texture on the generation of hydrodynamic pressure between conformal contacting surfaces[J]. Tribology Letters，2010，37(2)：123-130.
[72] JI J，FU Y，BI Q. The influence of partially textured slider with orientation ellipse dimples on the behavior of hydrodynamic lubrication[J]. Industrial Lubrication and Tribology，2014，66(2)：161-167.
[73] SHEN C，KHONSARI M M. Effect of dimple’s internal structure on hydrodynamic lubrication[J]. Tribology Letters，2013，52(3)：415-430.
[74] HSU S M，JING Y，HUA D，et al. Friction reduction using discrete surface textures：Principle and design[J]. Journal of Physics D：Applied Physics，2014，47(33)：335307.
[75] GREINER C，ARZT E，del CAMPO A. Hierarchical Gecko-like adhesives[J]. Advanced Materials，2009，21(4)：479-482.
[76] SHEN Cong， HUANG Wei，MA Guoliang，et al. A novel surface texture for magnetic fluid lubrication[J]. Surface & Coatings Technology，2009，204(4)：433-439.
[77] LIAO Sijie，HUANG Wei，WANG Xiaolei. Micro-magnetic field arrayed surface for ferrofluids lubrication[J]. Journal of Tribology，2012，134(2)：021701.