THE STUDY AND DEVELOPMENT ON PCA-CAPP SYSTEM

Abstract

Abstract: It is presented that it is necessary and realiable to develop CAPP system used to Printed Circuit Assembly (PCA) technology. PCA Component Information Descriptions are given. The decision logic methods of PCA process planning are designed and generated. The automatic PMI generation (APG) system is developed. The APG system has been applied in the actual manufacturing environment and a preliminary evaluation showed expected and pleased results.

Key words: CAPP, Information, PCA, PMI, Printed circuit board

CLC Number:

TN41

Wang Runxiao;Zhao Xu;George Feng. THE STUDY AND DEVELOPMENT ON PCA-CAPP SYSTEM[J]. , 1998, 34(6): 80-84.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1998/V34/I6/80

[1]	ZHOU Daolin, WANG Xiangyu, QU Xintian, WAN Ruoli, SHAO Dong, LI Liang. Longitudinal State Estimation of 4WD Vehicles Using Multi Information Adaptive Fusion Algorithm [J]. Journal of Mechanical Engineering, 2026, 62(8): 157-168.
[2]	DONG Zishuo, GUO Wei, YAN Leming, ZHANG Min, YU Meng, LI Jixin. FET Prediction and Analysis with Data-Driven method for Non-steady Stage in Endless Rolling [J]. Journal of Mechanical Engineering, 2026, 62(6): 163-173.
[3]	KE Qingdi, LI Zisheng, WANG Ling, CHEN Xiaoxu, ZHANG Lei. A Knowledge Mining Method for Green Design Knowledge Driven by Design Information Characteristics [J]. Journal of Mechanical Engineering, 2025, 61(9): 424-436.
[4]	HUANG Danping, WANG Jingdan, LUO Fan, LIAO Shipeng, GAN Fangji. Novel Online Measurement Method for Minuscule Liquid Flow Rates [J]. Journal of Mechanical Engineering, 2025, 61(6): 66-78.
[5]	BAO Hong, WANG Zheng, TAO Jing, LI Hongzhen, YU Suiran, SONG Peilong. A Non-cooperative Game Modular Design Method for Mechanical and Electrical Products for Reuse and Assembly Complexity Balance [J]. Journal of Mechanical Engineering, 2025, 61(5): 285-296.
[6]	LIU Kuo, CUI Yiming, YANG Xu, LI Mingyu, LI Kai, WANG Yongqing. Unsupervised Health Monitoring Methods for Truss Robots in Automobile Assembly Workshops [J]. Journal of Mechanical Engineering, 2025, 61(4): 44-54.
[7]	LI Jun, LI Jiqiu, SUN Yacheng, SHAN Fengwu, ZENG Jianbang. Prediction of Remaining Mileage of Electric Vehicle Based on Driving Behavior [J]. Journal of Mechanical Engineering, 2025, 61(4): 262-272.
[8]	OUYANG Tiancheng, WANG Chengchao, YE Jinlu, XU Peihang, ZHANG Zhiqiang, PAN Wenjun, XU Enyong. Efficient State Estimation of Lithium-ion Battery Based on Data Mining Technology [J]. Journal of Mechanical Engineering, 2025, 61(24): 223-234.
[9]	WANG Yiwei, GUO Qi, LIU Xinyu, ZHENG Lianyu, ZHANG Xiangrong, WANG Binbin, LAI Xiaoming, LI Yun. Assembly of Space Deployable Mechanism Driven by Enhanced Assembly Process Information Model Assisted by Mixed Reality [J]. Journal of Mechanical Engineering, 2025, 61(2): 371-383.
[10]	WANG Buyun, SHI Yukun, JIANG Jincheng, CHENG Jun, YANG Ou, DING Huiqin. Positioning Error Modeling & Compensation Method for Stacking Forklift Mobile Robot [J]. Journal of Mechanical Engineering, 2025, 61(17): 90-104.
[11]	TAN Lin, MA Wei, YIN Chenbo, YANG Zhongliang, WANG Dayu. Pressure Soft Measurement of Excavator Hydraulic System Based on Mutual Information and BO-LSTM [J]. Journal of Mechanical Engineering, 2025, 61(16): 384-393.
[12]	SHEN Huimin, DING Jintao, SHEN Mengruo, LEI Yong. Multi-finger Dynamic Position Tracking and Operation Space Mapping Method for Aircraft Cockpit Panel Maneuver Guidance [J]. Journal of Mechanical Engineering, 2025, 61(15): 441-452.
[13]	YANG Chen, LI Tao, WANG Mingyu, YANG Dongdong, YAN Meng. Product Life Cycle Assessment Method Based on Incomplete Information Imputation [J]. Journal of Mechanical Engineering, 2025, 61(11): 311-325.
[14]	ZHENG Lijuan, SUN Yong, XU Xiangqian, YU Juman, WANG Jun, WANG Chengyong. Laser Micromachining of Heterogeneous Multi-layer Composite Materials:A Review [J]. Journal of Mechanical Engineering, 2025, 61(1): 305-325.
[15]	FANG Congfu, LI Hongyang, SHEN Jianyun, WU Xian. Study on Intelligent Prediction of Surface Roughness Based on Integration of Abrasive Characteristics and Process Parameters [J]. Journal of Mechanical Engineering, 2024, 60(7): 224-235.

THE STUDY AND DEVELOPMENT ON PCA-CAPP SYSTEM

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments