| [1] |
YUE Xiaoming, ZANG Shuo, ZHAO Yonghua, LIU Weidong, YIN Yingyue, ZHANG Qinhe.
Experimental Study on EDM ECM Hybrid Processes of High-quality Small Hole with Super Depth-diameter Ratio
[J]. Journal of Mechanical Engineering, 2024, 60(9): 374-382.
|
| [2] |
YUE Xiaoming, ZANG Shuo, XU Zuoke, ZHANG Qinhe, ZHANG Jianhua, HUO Mengyou.
Trajectory Planning and Servo Control Strategy of EDM Milling Based ona 6-DOF Serial Robot
[J]. Journal of Mechanical Engineering, 2023, 59(9): 20-27.
|
| [3] |
CHU Xuyang, ZHOU Kesheng, ZHUANG Weihuang, ZHOU Wei.
Study on EDM Method Based on Strip Electrode for Micro-channel Structure
[J]. Journal of Mechanical Engineering, 2022, 58(19): 283-292.
|
| [4] |
LI Shujuan, XIN Bin, YANG Yuxiang, LU Xiong, LI Yan, JIANG Bailing, JIA Zhen, LI Yuxi.
Investigation of Plasma Volt-ampere Characteristics and Gap Modeling of EDM
[J]. Journal of Mechanical Engineering, 2019, 55(5): 232-240.
|
| [5] |
BAI Yufei, WANG Zhenlong, ZHAO Zhaoxi, WANG Yukui.
Simulation Model of WEDM with Random Distribution of Discharge Position
[J]. Journal of Mechanical Engineering, 2019, 55(17): 200-206.
|
| [6] |
LU Xiong, LI Shujuan, XIN Bin, WU Xiaoyu, ZHAO Ziyu, LI Yan, JIANG Bailing, LI Yuxi.
Modeling and Control of WEDM Process of Silicon Single Crystal
[J]. Journal of Mechanical Engineering, 2018, 54(17): 149-156.
|
| [7] |
CHANG Weijie1, CHEN Yuanlong1, ZHANG Jianhua2, XU Bin3, FANG Ming1.
Single Pulse Discharge Channel Expansion Laws of EDM
[J]. Journal of Mechanical Engineering, 2016, 52(9): 208-212.
|
| [8] |
YU Jianwu, HE Lihua, DUAN Wen, SHEN Xiang, YI Cheng.
Prediction Model of Technological Indexes in EDM of 8418 Steel
[J]. Journal of Mechanical Engineering, 2016, 52(11): 207-212.
|
| [9] |
DU Lianming;ZHANG Qinhe;ZHANG Jianhua;ZHANG Ya.
Discharge Channel Compressed Micro-EDM Techniques Based on PZT Excitation
[J]. , 2013, 49(9): 184-189.
|
| [10] |
SHAN Yan;WANG Gang;WU Weiwei.
Electrode Orbiting Compensation in EDM Based on Generalized Offset of Tool Path
[J]. , 2009, 45(10): 261-265.
|
| [11] |
JIA Zhenyuan;GU Feng;WANG Fuji;ZHOU Ming.
PARAMETER OPTIMIZATION OF EDM MICRO-AND-SMALL HOLES BASED ON SIGNAL-TO-NOISE AND GREY RELATIONAL GRADE
[J]. , 2007, 43(7): 63-67.
|
| [12] |
REN Fujun;JIANG Yongcheng.
CAD/CAM SYSTEM FOR SPATIAL CURVED SURFACE IN WIRE CUT ELECTRONIC DISCHARGE MACHINING
[J]. , 2007, 43(5): 214-218.
|
| [13] |
LI Wenzhuo;LIU Jiaguang;YU Yunxia.
KEY TECHNOLOGIES OF MICRO EDM MACHINE TOOLS
[J]. , 2007, 43(1): 170-175.
|
| [14] |
HAN Fuzhu;TAO Chunsheng;ZHOU Xiaoguang;MASANORI Kunieda.
DEVELOPMENT OF SIMULATION SYSTEM ON WEDM FIRST CUT
[J]. , 2006, 42(6): 101-105.
|
| [15] |
ZHU Pailong;QI Changzheng;WEN Zhiyuan;TANG Dianbo;ZHOU Jinjin;XU Zhongyao.
PROCESS APPROACH WITH ITS ELECTRODE DESIGN AND MANUFACTURING FOR DEEP MICRO-HOLE OF EXTRA LARGE ASPECT RATIO
[J]. , 2006, 42(2): 198-202.
|
