DYNAMIC ANALYSIS ON COLD PILGER MILL CONSIDERING KINEMATIC PAIR CLEARANCE

›› 1996, Vol. 32 ›› Issue (6): 95-100.

• Article • Previous Articles Next Articles

DYNAMIC ANALYSIS ON COLD PILGER MILL CONSIDERING KINEMATIC PAIR CLEARANCE

Gong Jingan;Jiang Wenguang

Yanshan University

Published:1996-11-01

Abstract

Abstract: A new dynamic model of cold Pilger mill by Kane method is established. It takes the clearance of kinematic pairs into consideration, and the method is more exact and simple than those available at present. With this method, the separation and shock characteristic of kinematic pairs with clearance can be more exactly revealed, which is significantly helpful for high-speed, lone-stroke rolling mill designing.

Key words: Clearance, Cold pilger mill, Inertia force, Kinematie pairs

Gong Jingan;Jiang Wenguang. DYNAMIC ANALYSIS ON COLD PILGER MILL CONSIDERING KINEMATIC PAIR CLEARANCE[J]. , 1996, 32(6): 95-100.

[1]	LI Qianqian, TANG Deli, GE Jian, LU Yi, BIE Fengfeng, ZHU Xiaoqu. Effect of Floating Impeller on the Inner Flow Characteristics and Axial Force in Regenerative Flow Pump [J]. Journal of Mechanical Engineering, 2024, 60(14): 378-386.
[2]	CHANG Qi, ZHOU Zhang-cong, LIU Fu-chao, ZHANG Hao, YUE Zhu-feng. Reliability Analysis of Aircraft Door Lock Mechanism with Interval Joint Clearance Uncertainties [J]. Journal of Mechanical Engineering, 2023, 59(8): 264-272.
[3]	BIN Guangfu, ZHONG Xinli, ZHANG Yangyan, YANG Feng, CHEN Anhua. Active Control of Transient Vibration of Turbocharger Rotor Based on Piezoelectric Drive Floating Ring Bearing Adjustable Clearance [J]. Journal of Mechanical Engineering, 2023, 59(18): 31-41.
[4]	WANG Tong, QIAN Caifu, WU Zhiwei, ZHAO Jingyu. Analysis of Load-bearing Capacity of Multi-layer Wrapped High Pressure Vessels [J]. Journal of Mechanical Engineering, 2023, 59(14): 169-178.
[5]	LIU Zhen, HU Sanbao, HU Junhua, XIANG Chao. Dynamic Modeling and Analysis of Rigid Multi-body System with Clearance Joints Based on Deep Learning [J]. Journal of Mechanical Engineering, 2022, 58(9): 136-146.
[6]	WANG Chengzhi, WANG Yunchao. Influence of Clearances and Force State of Joints on Steering Error of Spatial Steering Mechanism [J]. Journal of Mechanical Engineering, 2022, 58(4): 240-249.
[7]	YANG Yu-xing, BAO Yong-jie, WANG Jin-long, DU Feng-ming. Refined Finite Element Analysis Method for Mechanical Behavior of Composite Bolted Joints [J]. Journal of Mechanical Engineering, 2022, 58(22): 198-207.
[8]	HAN Zhao, LIAN Zihao, ZHENG Enlai, JIANG Shuyun, ZHU Songqing, SHI Jinfei. Analysis of Dynamic Error and Wear Cycle Behavior of Kinematic Pair for Planar Flexible Multi-link Transmission System Including Revolute Clearance Joints with Irregular Rough Surfaces [J]. Journal of Mechanical Engineering, 2022, 58(19): 115-129.
[9]	YU Tianxiang, ZHAO Qingyan, SHANG Bolin, SONG Bifeng. Probabilistic Fatigue Life Prediction Method of Spline Considering Clearance Uncertainty [J]. Journal of Mechanical Engineering, 2022, 58(16): 391-402.
[10]	HAO Xu, YU Changxin, LIU Jun, HAN Qingkai, ZHAI Jingyu. Thermal-induced Bearing Stiffness and Clearance Variation Characteristics and its Effect on Vibration Response of Rotor System [J]. Journal of Mechanical Engineering, 2022, 58(13): 147-165.
[11]	ZHANG Yongnian, TAO Yaman, JIANG Shuyun, ZHU Songqing, ZHENG Enlai, SHI Jinfei. Dynamic Error Analysis and Optimization Design of Planar Flexible Multi-link Mechanism with Angular Contact Ball Bearing and Revolute Clearance Sliding Bearing Joints with Rough Surfaces [J]. Journal of Mechanical Engineering, 2022, 58(1): 69-87.
[12]	FENG Kun, WANG Jingshuo, ZUO Yanfei, JIANG Zhinong. Simulation Analysis Method for Equivalent Mechanical Characteristics of Rotor Asymmetric Supports with Bearing Clearance [J]. Journal of Mechanical Engineering, 2021, 57(19): 138-146.
[13]	Yang Liang, Xia Yuanfeng, Pang Jian, Chu Zhigang. Investigation on Transient Vibro-impacts of Vehicle Driveline Based on Clearance and Friction Nonlinearity [J]. Journal of Mechanical Engineering, 2021, 57(10): 50-64.
[14]	CHEN Congcong, LI Tuanjie, MA Xiaofei. Static Multiple-stable-state Analysis of Deployable Structures with Clearance Joints [J]. Journal of Mechanical Engineering, 2020, 56(5): 72-79.
[15]	ZHENG Enlai, CHU Lei, JIANG Shuyun, ZHU Songqing, KANG Min, SHI Jinfei. Multi-body Dynamic Modeling and Error Analysis of Planar Flexible Multi-link Mechanism with Lubricated Revolute Clearance Joints and Crankshaft-bearing Structure [J]. Journal of Mechanical Engineering, 2020, 56(3): 106-120.

DYNAMIC ANALYSIS ON COLD PILGER MILL CONSIDERING KINEMATIC PAIR CLEARANCE

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments