| [1] |
ZHANG Yunshu, WU Bintao, ZHAO Yun, DING Donghong, PAN Zengxi, LI Huijun.
Research Progress in the Numerical Simulation of Heat and Mass Transfer during Wire Arc Additive Manufacturing
[J]. Journal of Mechanical Engineering, 2024, 60(8): 65-80.
|
| [2] |
LI Kun, JI Chen, BAI Shengwen, JIANG Bin, PAN Fusheng.
Research Status and Prospects of Wire-arc Additive Manufacturing Technology for High-performance Magnesium Alloys
[J]. Journal of Mechanical Engineering, 2024, 60(7): 289-311.
|
| [3] |
CHEN Wei, ZHAO Jie, ZHU Libin, CAO Haibo.
Research Progress on Additive Manufacturing of Low Activation Steels
[J]. Journal of Mechanical Engineering, 2024, 60(7): 312-333.
|
| [4] |
DU Wenbo, LI Xiaoliang, LI Xia, HU Shenheng, ZHU Sheng.
Research Status of Additive Friction Stir Deposition Process
[J]. Journal of Mechanical Engineering, 2024, 60(7): 374-384.
|
| [5] |
ZHENG Yang, ZHAO Zihao, LIU Wei, YU Zhengzhe, NIU Wei, LEI Yiwen, SUN Ronglu.
Research Progress in High-performance Mg Alloys Prepared by Additive Manufacturing
[J]. Journal of Mechanical Engineering, 2024, 60(7): 385-400.
|
| [6] |
ZHANG Dang, ZHAO Yongxuan, WANG Zhenjun, ZHANG Yingfeng.
Research on Data-knowledge Driven Intelligent Control Architecture for Discrete Manufacturing System
[J]. Journal of Mechanical Engineering, 2024, 60(6): 1-10,20.
|
| [7] |
DI Zijun, YUAN Dongfeng, LI Dongyang, LIANG Daojun, ZHOU Xiaotian, XIN Miaomiao, CAO Feng, LEI Tengfei.
Tool Fault Diagnosis Method Based on Multiscale-efficient Channel Attention Network
[J]. Journal of Mechanical Engineering, 2024, 60(6): 82-90.
|
| [8] |
REN Shan, WANG Jin, ZHAO Xin, ZHANG Yingfeng.
“Doubly-fed” Manufacturing Service of Intelligent Design and Preventive Maintenance for Complex Products
[J]. Journal of Mechanical Engineering, 2024, 60(6): 127-136.
|
| [9] |
WANG Yuefei, WANG Chao, XU Yutao, SUN Rui, XIAO Kai, WANG Kailin.
Digital Twin Task Scheduling Method for Jobs of Intelligent Manufacturing Unit under Edge-cloud Collaboration
[J]. Journal of Mechanical Engineering, 2024, 60(6): 137-152.
|
| [10] |
DU Jun, WANG Qianyuan, HE Jimiao, ZHANG Yongheng, WEI Zhengying.
Influence of the Offset Distance between Droplet and Molten Pool on the Molten Pool Morphology in TIG-assisted Droplet Deposition Manufacturing
[J]. Journal of Mechanical Engineering, 2024, 60(5): 219-230.
|
| [11] |
SU Jiantao, DONG Shaohua, ZHU Shimin.
Research on Machine Fault Rescheduling Problem of Multi Objective Hybrid Flow Shop Based on Intelligent Manufacturing
[J]. Journal of Mechanical Engineering, 2024, 60(4): 438-448.
|
| [12] |
JIANG Zhoumingju, XIONG Yi, WANG Baicun.
Human-machine Collaborative Additive Manufacturing for Industry 5.0
[J]. Journal of Mechanical Engineering, 2024, 60(3): 238-253.
|
| [13] |
SHI Yilei, QUAN Yinzhu, XU Haiying, WANG Zhuang, MA Wenlong, PENG Yong.
Factors Analysis on the Electron Beam Waist Position of Gas Discharger Electron Beam Gun of Coaxial Beam Wire
[J]. Journal of Mechanical Engineering, 2024, 60(3): 328-336.
|
| [14] |
MA Chuanzhen, LIU Henan, CHEN Mingjun, TIAN Jinchuan, ZHOU Zihan, SUN Jiangang, QIN Biao.
Research Progress on Key Property and Manufacturing Technology of Hemispherical Resonator
[J]. Journal of Mechanical Engineering, 2024, 60(3): 354-372.
|
| [15] |
RONG Peng, Cheng Jing, DENG Hongwen, TAO Changan, GAO Chuanyun, RAN Xianzhe, CHENG Xu, TANG Haibo, LIU Dong.
Effect of Different Heat Treatments on Microstructure and Tensile Properties of TC4 Titanium Alloy Fabricated by Laser Directed Energy Deposition
[J]. Journal of Mechanical Engineering, 2024, 60(20): 99-107.
|
