• CN:11-2187/TH
  • ISSN:0577-6686

›› 2004, Vol. 40 ›› Issue (3): 20-25.

• 论文 • 上一篇    下一篇

扫码分享

可控参考时间的多指灵巧手协调控制

何永强;张启先   

  1. 军械工程学院光学与电子工程系;北京航空航天大学机器人研究所
  • 发布日期:2004-03-15

REFERENCE-TIME-CONTROLLABLE CONTROL FOR MULTI-FINGERED DEXTEROUS HAND COORDINATION

He Yongqiang;Zhang Qixian   

  1. Ordnance Engineering College Beijing University of Aeronautics and Astronautics
  • Published:2004-03-15

摘要: 提出一种可控参考时间的多指灵巧手协调控制方法。通过对系统误差评价控制规划器的参考时间,使期望的输出可以根据系统当前的运动状态进行调整,从而使系统具有处理不可预测和不确定事件的能力。用这种控制方法对多指灵巧手进行运动学和动力学协调控制,在物体遇到障碍或扰动时系统可以以牺牲时间为代价,尽可能保证物体按预先规划的路径运动并保持手指的抓持位形,使抓持更稳定可靠,同时可避免物体和系统受到损坏。仿真和试验证明了这种方法的有效性。

关键词: 多指灵巧手, 多指协调, 可控参考时间, 控制方法

Abstract: A reference-time-controllable control method for multi-fingered dexterous hand coordination is introduced. It can handle unexpected or uncertain event, as the reference time is controlled through estimating error of the system and desired output can be adjusted based on the running state of the system. Kinematics and dynamics controllers are designed employing this new approach. The object can be controlled to move along desired path and keep grasping configuration of fingers to the greatest extent at the cost of time when the object is obstructed or disturbed. Thus the grasping stability can be maintained and the damage of the object or the system can be avoided. Simulation and experiment illustrate the effectiveness of the method.

Key words: Control method, Multi-fingered coordination, Multi-fingered dexterous hand, Reference-time-controllable

中图分类号: