板带轧机振动理论研究进展

doi:10.3901/JME.2024.07.093

机械工程学报 ›› 2024, Vol. 60 ›› Issue (7): 93-113.doi: 10.3901/JME.2024.07.093

扫码分享

板带轧机振动理论研究进展

和东平^1,2, 王涛^1,2, 刘元铭^1,2, 徐慧东^1,2, 王君^1,2, 王志华^1,2

1. 太原理工大学机械与运载工程学院太原 030024;
2. 先进金属复合材料成形技术与装备教育部工程研究中心太原 030024

收稿日期:2023-02-10 修回日期:2023-12-15 出版日期:2024-04-05 发布日期:2024-06-07
通讯作者: 王涛，男，1985年出生，博士，教授，博士研究生导师。主要研究方向为轧制工艺及设备。E-mail：tyutwt@163.com
作者简介:和东平，男，1989年出生，博士，助理研究员，硕士研究生导师。主要研究方向为轧机非线性动力学分析及稳定性控制。E-mail：tyuthdp@163.com
基金资助:
国家自然科学基金(52205404，52375367，51905369)、山西省基础研究计划(202203021212293，202203021221054)和海安太原理工大学先进制造与智能装备产业研究院开放项目(2023HA-TYUTKFYF004)资助项目。

Review of Theoretical Studies on Vibration in Strip Rolling Mill

HE Dongping^1,2, WANG Tao^1,2, LIU Yuanming^1,2, XU Huidong^1,2, WANG Jun^1,2, WANG Zhihua^1,2

1. College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024;
2. Engineering Research Center of Advanced Metal Composites Forming Technology and Equipment, Ministry of Education, Taiyuan 030024

Received:2023-02-10 Revised:2023-12-15 Online:2024-04-05 Published:2024-06-07

摘要/Abstract

摘要： 板带轧机振动理论的研究一直是轧制成形领域的前沿科学问题，对板材的质量和设备的稳定运行至关重要。随着轧机朝着大型化、高速化、连续化、智能化的快速发展以及大量新技术、新工艺的采用，板带轧机振动的研究已经逐渐从单一属性研究发展为以研究多态耦合振动为热点，从过去的线性研究转变为以非线性研究为重点。对板带轧机振动理论的研究除了要有合理的结构模型外，还依赖于对轧机振动的精确控制。为了充分认识板带轧机的动力学行为及振动特征，得到合理可行的控制策略，综述了国内外板带轧机振动理论的研究现状，分别从单向振动、多态耦合振动以及非线性振动三个方面进行了总结评价，分析了主动控制法和被动控制法在轧制成形过程中的应用现状，并结合当前钢铁行业发展趋势对板带轧机振动未来的研究方向进行了展望。

关键词: 板带轧机, 单向振动, 多态耦合振动, 非线性振动, 振动控制

Abstract: The vibration theory of strip rolling mill has always been a scientific problem in the field of rolling forming, which is very important to the quality of sheet metal and the stable operation. With the rapid development of rolling mill towards large scale, high speed, continuous and intelligent, as well as the adoption of a large number of new technologies and new processes, the research on rolling mill vibration has gradually developed from the single attribute study to polymorphic coupled vibration, and from linear vibration to nonlinear vibration. The study of rolling mill vibration theory depends on the precise control of rolling mill vibration in addition to the reasonable structure model. In order to fully understand the dynamic behavior and vibration characteristics of strip rolling mill and obtain reasonable and feasible control strategy, the research status of vibration theory of strip rolling mill at home and abroad is summarized from the aspects of unidirectional vibration, multistate coupling vibration and nonlinear vibration, and the application status of active control method and passive control method in rolling forming process is analyzed. Considering the current development trend of steel industry, the future research direction of strip rolling mill is prospected.

Key words: strip rolling mill, unidirectional vibration, polymorphic coupled vibration, nonlinear vibration, vibration control

中图分类号:

TG113

和东平, 王涛, 刘元铭, 徐慧东, 王君, 王志华. 板带轧机振动理论研究进展[J]. 机械工程学报, 2024, 60(7): 93-113.

HE Dongping, WANG Tao, LIU Yuanming, XU Huidong, WANG Jun, WANG Zhihua. Review of Theoretical Studies on Vibration in Strip Rolling Mill[J]. Journal of Mechanical Engineering, 2024, 60(7): 93-113.

参考文献

[1] 郜志英,臧勇,曾令强. 轧机颤振建模及理论研究进展[J]. 机械工程学报,2015,51(16):87-105. GAO Zhiying,ZANG Yong,ZENG Lingqiang. Review of modelling and theoretical studies on chatter in the rolling mills[J]. Journal of Mechanical Engineering,2015,51(16):87-105.
[2] HE D,XU H,WANG M,et al. Application of dynamic vibration absorber for vertical vibration control of corrugated rolling mill[J]. Journal of Iron and Steel Research,International,2023,30(4):736-748.
[3] WANG Z,BAO J,TONG J,et al. Study on vibration asymmetry of hot rolling mill with structural gap[J]. Iranian Journal of Science and Technology,Transactions of Mechanical Engineering,2023,47:1223-1234.
[4] ZHANG Y,LIN R,ZHANG H,et al. Vibration prediction and analysis of strip rolling mill based on XGBoost and Bayesian optimization[J]. Complex & Intelligent Systems,2023,9:133-145.
[5] 万晓航. 中厚板轧机振动特性与轧辊磨损评价研究[D]. 西安:西安科技大学,2014. WANG Xiaohang. Study on slab rolling mill vibration characteristic and roller wearing evaluation[D]. Xi'an:Xi'an University of Science and Technology,2014.
[6] YARITA I,FURUKAWA K,SEINO Y. Analysis of chattering in cold rolling for ultrathin gauge steel strip[J]. Transactions ISIJ,1978,18(1):1-10.
[7] TAMIYA T,FURUI K,LIDAI H,et al. Analysis of chattering phenomenon in cold rolling[C]//Proceedings of science and technology of flat rolled products. Tokyo:International Conference on Steel Rolling,1980,2:1191-1202.
[8] TLUSTY J,CRITCHLEY S,PATON D,et al. Chatter in cold rolling[J]. Annals of the CIRP,1982,31(1):195-199.
[9] CHEFNEUX L,FLSCHBACH J P. Study and industrial control of chatter in cold rolling[J]. Iron and Steel Engineer,1984,61(11):17-26.
[10] PATON D L,CRITCHLEY S. Tandem mill vibration:Its cause and control[J]. Iron and Steel Making,1985,12(3):37-43.
[11] PAWELSKI O,RASP W,FRIEDEWALD K. Chattering in cold rolling-theory of interaction of plastic and elastic deformation[C]//Proceeding of 4th International Steel Rolling Conference. Deauville,France:The Science and Technology of Flat Rolling,1987,2E(11):1-5.
[12] NESSLER G L,CORY J F. Cause and solution of fifth octave back-up roll chatter on 4-hold mills and temper-mills[J]. Iron and Steel Engineer,1989,66(12):33-37.
[13] JOHNSON R E,QI Q. Chatter dynamics in sheet rolling[J]. International Journal of Mechanical Sciences,1994,36(7):617-630.
[14] YUN I S,EHMANN K F,WILSON W R D. Chatter in the strip rolling process,Part II:Dynamic rolling experiments[J]. Journal of Manufacturing Science and Engineering,1998,120(2):337-342.
[15] LU X,SUN J,WEI Z,et al. Effect of minimum friction coefficient on vibration stability in cold rolling mill[J]. Tribology International,2021,159:106958.
[16] 侯东晓,彭荣荣,刘浩然. 变摩擦力下板带轧机辊系垂直-水平耦合振动特性[J]. 东北大学学报(自然科学版),2013,34(11):1615-1619. HOU Dongxiao,PENG Rongrong,LIU Haoran. Vertical-horizontal coupling vibration characteristics of strip mill rolls under the variable friction[J]. Journal of Northeastern University(Natural Science),2013,34(11):1615-1619.
[17] 侯东晓,方成,陈善平,等. 板带轧机液压压下-垂直振动特性研究[J]. 东北大学学报(自然科学版),2022,43(7):972-980. HOU Dongxiao,FANG Chen,CHEN Shanping,et al. Research on hydraulic screw down-vertical vibration characteristics of strip rolling mill[J]. Journal of Northeastern University(Natural Science),2022,43(7):972-980.
[18] 钟掘,唐华平. 高速轧机若干振动问题-复杂机电系统耦合动力学研究[J]. 振动、测试与诊断,2002, 22(1):1-8. ZHONG Jue,TANG Huaping. Several vibration problems of high speed rolling mill-coupling dynamics study of complex electromechanical system[J]. Journal of Vibration,Measurement and Diagnosis,2002,22(1):1-8.
[19] 李建平,张希林,段吉安. 轧机工作辊振动在线监测的新方法[J]. 中南大学学报(自然科学版),2004,35(4):613-617. LI Jianping,ZHANG Xilin,DUAN Jian. A new method for monitoring vibration of work roller in rolling mill[J]. Journal of Central South University(Science and Technology),2004,35(4):613-617.
[20] 邹家祥,徐乐江. 冷连轧机系统振动控制[M]. 北京:冶金工业出版社,1988. ZOU Jiaxiang,XU Lejiang. Vibration control of cold tandem mill system[M]. Beijing:Metallurgical Industry Press,1988.
[21] 闫晓强. 热连轧机机电液耦合振动控制[J]. 机械工程学报,2011,47(17):61-65. YAN Xiaoqiang. Machinery-electric-hydraulic coupling vibration control of hot continuous rolling mills[J]. Journal of Mechanical Engineering,2011,47(17):61-65.
[22] 曾令强,臧勇,郜志英,等. 轧机整体耦合建模问题研究[J]. 机械工程学报,2015,51(14):46-53. ZENG Lingqiang,ZANG Yong,GAO Zhiying,et al. Study on overall coupled modeling of the rolling mill[J]. Journal of Mechanical Engineering,2015,51(14):46-53.
[23] 连家创,段振勇,刘志勇. 四辊轧机横向振动固有频率的研究[J]. 东北重型机械学院学报,1982(3):16-23. LIAN Jiachuang,DUAN Zhenyong,LIU Zhiyong. Study on the natural frequency of four-roll mill's cross section vibration[J]. Journal of Dongbei Heavy Machinery College,1982(3):16-23.
[24] 申光宪,李明,史荣,等. 四辊轧机辊系偏移距机理的不确定性和微尺度静定性[J]. 机械工程学报,2010,46(10):69-70. SHEN Guangxian,LI Ming,SHI Rong,et al. Indeterminacy of the offset mechanism and microscale static determinacy of roll system in four-high mill[J]. Journal of Mechanical Engineering,2010,46(10):69-70.
[25] 孙建亮,彭艳,高亚南,等. 热连轧机水平振动仿真与实验研究[J]. 中南大学学报(自然科学版),2015,46(12):4497-4503. SUN Jianliang,PENG Yan,GAO Yanan,et al. Simulation and experiment of horizontal vibration of hot tandem rolling mill[J]. Journal of Central South University (Science and Technology),2015,46(12):4497-4503.
[26] 张明,彭艳,孙建亮,等. 考虑上/下工作辊非对称运动的热轧机水平振动研究[J]. 中南大学学报(自然科学版),2017,48(12):3239-3247. ZHANG Ming,PENG Yan,SUN Jianliang,et al. Horizontal vibration in hot tandem rolling mill considering asymmetric movement of upper and lower work rolls[J]. Journal of Central South University(Science and Technology),2017,48(12):3239-3247.
[27] 张义方,闫晓强,凌启辉. 多源激励下CSP轧机主传动扭振问题研究[J]. 机械工程学报,2017,53(10):34-42. ZHANG Yifang,YAN Xiaoqiang,LING Qihui. Research on torsional vibration of main drive system under multi-source excitation in CSP rolling mill[J]. Journal of Mechanical Engineering,2017,53(10):34-42.
[28] MOLLER R H,HOGGART J S. Periodic surface finish and torque effects during cold strip rolling[J]. The Journal of the Australian Institute of Metals,1967,12(2):155-164.
[29] JEWIK H,STRATFORD R P,THOMAS C W. Torque amplification and torsional vibration in large mill drives[J]. IEEE Transactions on Industry and General Applications,1969,5(3):333-346.
[30] KASHAY A M,JANY L. Torque amplification and vibration investigation project[J]. Iron and Steel Engineer,1973(7):55-70.
[31] MONACO G. Dynamics of rolling mills-mathematical models and experimental results[J]. AISE Year Book, 1977(12):399-410.
[32] TANG H P,WAN D Y,ZHONG J. Investigation into the electromechanical coupling unstability of a rolling mill[J]. Journal of Materials Processing Technology,2002,129(1):294-298.
[33] BELLI P,BITTANTI S,DE M. On the origin of torsional vibrations in hot rolling mills and apossible remedy[J]. Journal of Dynamic Systems,Measurement and Control,2004,126(4):811-823.
[34] GASPARIC J. Vibration analysis identifies the cause of mill chatter[J]. Iron and Seel Engineer,1991,68(2):27-29.
[35] YUN I S,WILSON W R D,EHMANN K F. Chatter in the strip rolling process,Part I:Dynamic model of rolling[J]. Journal of Manufacturing Science and Engineering,1998,120(2):330-336.
[36] HU P,EHMANN K F. Stability analysis of chatter on a tandem rolling mill[J]. Journal of Manufacturing Processes,2000,2(4):217-224.
[37] HU P,EHMANN K F. A dynamic model of the rolling process. Part I:Homogeneous model[J]. International Journal of Machine Tools & Manufacture,2000,40(1):1-19.
[38] HU P,EHMANN K F. Fifth octave mode chatter in rolling[J]. Proceedings of the Institution of Mechanical Engineers,Part B:Journal of Engineering Manufacture,2001,(1):797-809.
[39] ROBERTS W L. Four H mill stand chatter of fifth octave mode[J]. Iron and Seel Engineer,1978,55(10):41-47.
[40] ROBERTS W L. Computing the coefficient of friction in the roll bite from mill data[J]. Blast Furnace and Steel Plant,1997,(6):499-508.
[41] YUKIO K,YASUHIRO S,NOBUO N,et al. Analysis of chatter in tandem cold rolling mills[J]. ISIJ International,2003,43(1):77-84.
[42] 陈敬常,李友荣. 预应力轧机垂直方向振动研究[J]. 武汉钢铁学院学报,1982,13(2):13-18. CHEN Jingchang,LI Yourong. A study of the vertical vibrational behavior of the prestress rolling mill[J]. Journal of Wuhan Iron and Steel Institute,1982,13(2):13-18.
[43] 吴炳胜,牛培. 基于Adams的冷轧机工作辊振动分析与仿真[J]. 锻压技术,2015,40(11):159-163. WU Bingsheng,NIU Pei. Analysis and simulation of work rolls in cold rolling mill based on adams[J]. Forging and Stamping Technology,2015,40(11):159-163.
[44] 薛瑄,李强强,靳宝全,等. 基于多平台虚拟样机模型的轧机压下系统振动研究[J]. 机床与液压,2018,46(13):110-115. XUE Xuan,LI Qiangqiang,JIN Baoquan,et al. Vibration research of mill hydraulic pressure system based on multi-platform virtual prototype model[J]. Machine Tool and Hydraulic,2018,46(13):110-115.
[45] 王长松,陈志健,陈先霖. 冷带轧机颤振现象的分析与仿真[J]. 北京科技大学学报,1991,13(1):15-19. WANG Changsong,CHEN Zhijian,CHEN Xianlin. Analysis and simulation of chatter phenomenon on cold mill[J]. Journal of University of Science and Technology Beijing,1991,13(1):15-19.
[46] 王长松,孙民生,袁希. 宽带钢冷轧机颤振仿真与分析[J]. 北京科技大学学报,1994,16:57-66. WANG Changsong,SUN Minsheng,YUAN Xi. Simulation and analysis of chatter phenomenon on cold mill rolling wide strip[J]. Journal of University of Science and Technology Beijing,1994,16:57-66.
[47] 王长松. 冷带轧机自激振动的研究[D]. 北京:北京科技大学,1987. WANG Changsong. Analysis of self-excited vibration on cold mill[D]. Beijing:University of Science and Technology Beijing,1987.
[48] 杨其俊,连家创. 四辊轧机横向振动固有计算的改进[J].东北重型机械学院学报,1994(3):199-203. YANG Qijun,LIAN Jiachuang. Improvement on the inherent calculation of transverse vibration of four-high rolling mill[J]. Journal of Dongbei Heavy Machinery College,1994(3):199-203.
[49] 杨其俊,连家创. 高速冷带轧机垂直自激振动稳定性分析的数值计算方法[J]. 振动与冲击,1996(3):16-22. YANG Qijun,LIAN Jiachuang. Stability analysis of self-excited vertical vibration of high speed cold strip mills by numerical method[J]. Journal of Vibration and Shock,1996(3):16-22.
[50] 赵丽娟,王天博,刘杰,等. 柔性多体系统动力学的轧机机架垂振系统仿真研究[J]. 现代制造工程,2006(12):113-115. ZHAO Lijuan,WANG Tianbo,LIU Jie,et al. The simulation of the stand vertical vibration of rolling mill based on flexible-body system dynamic[J]. Modern Manufacturing Engineering,2006(12):113-115.
[51] 赵丽娟,徐涛,刘杰,等. 基于ADAMS/Vibration的轧机垂直振动模型的研究[J]. 系统仿真学报,2006,18(6):1566-1569. ZHAO Lijuan,XU Tao,LIU Jie,et al. Modeling and analysis on vertical vibration of mill using ADAMS/Vibration[J]. Journal of System Simulation,2006,18(6):1566-1569.
[52] 陈勇辉,刘世元,廖广兰. 四辊冷带轧机三倍频颤振机理的研究[J]. 机械工程学报,2003,39(6):118-123. CHEN Yonghui,LIU Shiyuan,LIAO Guanglan. Study on third-octave-mode chatter on 4-H cold rolling mills[J]. Journal of Mechanical Engineering,2003,39(6):118-123.
[53] DWIVEDY S K,DHUTEKAR S S,EBERHARD P. Numerical investigation of chatter in cold rolling mills[J]. Advanced Structured Materials,2012,16:213-227.
[54] HU P H,ZHAO H Y,EHMANN K F. Third-octave-mode chatter in roiling,part I:chatter model[J]. Proceedings of the Institution of Mechanical Engineers,Part B:Journal of Engineering Manufacture,2006,220(8):1267-1277.
[55] 侯福祥,张杰,史小路,等. 单辊驱动平整机水平颤振[J]. 北京科技大学学报,2006,28(10):973-977. HOU Fuxiang,ZHANG Jie,SHI Xiaolu,et a1. Horizon chatter in a single-roll driving temper rolling mill system[J]. Journal of University of Science and Technology Beijing,2006,28(10):973-977.
[56] 唐华平,钟掘. 单辊驱动轧机水平自激振动定性分析[J]. 机械工程学报,2001,37(8):56-60. TANG Huaping,ZHONG Jue. Qualitive analysis of self-excited horizon vibration in single-roll driving[J]. Journal of Mechanical Engineering,2001,37(8):56-60.
[57] ZHONG J,YAN H,DUAN J. Industrial experiments and findings on temper rolling chatter[J]. Journal of Meterials Processing Technology,2002,120(1):275-280.
[58] 范小彬,臧勇,王永涛,等. CSP轧机振动的测试与抑制[J]. 振动、测试与诊断,2007,27(2):156-158. FAN Xiaobin,ZANG Yong,WANG Yongtao,et al. Test and vibration suppression research of CSP rolling mill[J]. Journal of Vibration,Measurement & Diagnosis,2007,27(2):156-158.
[59] 范小彬,臧勇,王会刚. 热连轧机水平振动特性研究[J].钢铁,2010,45(9):62-66. FAN Xiaobin,ZANG Yong,WANG Huigang. Research on hot rolling mill horizontal vibration[J]. Iron and Steel, 2010,45(9):62-66.
[60] 凌启辉,闫晓强,张清东. 双动力源作用下热连轧机工作辊非线性水平振动特性研究[J]. 振动与冲击,2014,33(12):133-137. LING Qihui,YAN Xiaoqiang,ZHANG Qingdong. Nonlinear horizontal vibration characteristics of working rolls of a hot rolling mill with dual power source[J]. Journal of Vibration and Shock,2014,33(12):133-137.
[61] 凌启辉,闫晓强,张义方. 热连轧机非线性水平振动抑制研究[J]. 长安大学学报(自然科学版),2015,35(6):145-151. LING Qihui,YAN Xiaoqiang,ZHANG Yifang. Research on nonlinear horizontal vibration suppression of the hot continuous rolling mill[J]. Journal of Chang'an University(Natural Science Edition),2015,35(6):145-151.
[62] 孙建亮,刘宏民,李琰赟. 热连轧机水平振动及其轧制参数影响关系[J]. 钢铁,2015,50(1):43- 49. SUN Jianliang,LIU Hongmin,LI Yanyun. Horizontal vibration of hot rolling milland its relationship with rolling parameters[J]. Iron and Steel,2015,50(1):43-49.
[63] SZOLC T,KONOWROCKI R,MICHAJLOW M,et a1. An investigation of the dynamic electromechanical coupling effects in machine drive systems driven by asynchronous motors[J]. Mechanical Systems and Signal Processing,2014,49(1):118-134.
[64] TANG H,WANG D,ZHONG J. Investigation into the electromechanical coupling unstability of a rolling mill[J]. Journal of Materials Processing Technology,2002,129:294-298.
[65] 靳宝全,梁义维,熊诗波,等. 考虑反馈机构机电耦合的压下系统振动分析[J]. 振动、测试与诊断,2008,28(2):91-95. JIN Baoquan,LIANG Yiwei,XIONG Shibo,et al. Vibration analysis of rolling mill servo screwdown system[J]. Journal of Vibration,Measurement and Diagnosis,2008,28(2):91-95.
[66] 王鑫鑫. 基于热连轧机耦合振动的主动抑振控制研究[D]. 北京:北京科技大学,2019.兙俥 WANG Xinxin. Active vibration suppression based on hot rolling mill coupling vibration[D]. Beijing:University of Science and Technology Beijing,2019.
[67] 张瑞成,陈至坤,王福斌. 轧机主传动系统机电振动特性分析及控制措施研究[J]. 机械设计与制造,2010(6):112-114. ZHANG Ruicheng,CHEN Zhikun,WANG Fubin. Analysis on electromechanjcal vibration characteristic and control methods of the main drive system of rolling mill[J]. Machinery Design&Manufacture,2010(6):112-114.
[68] 张瑞成,王佩佩. 基于谐波干扰的轧机主传动机电耦合系统参激振动机理研究[J]. 现代制造工程,2013(10):102-107. ZHANG Ruicheng,WANG Peipei. Study on parametrically excited vibration in the rolling mill electromechanical coupling system based on harmonic disturbance[J]. Modem Manufacturing Engineering,2013(10):102-107.
[69] 张瑞成,卓丛林. 考虑磁参数影响的轧机主传动系统机电耦合振动特性研究[J]. 机械设计与制造,2015(8):128-132. ZHANG Ruicheng,ZHUO Conglin. Electromechanical coupling vibration characteristics of main drive system for rolling mill considering impacts of electrical parameters[J]. Machinery Design&Manufacture,2015(8):128-132.
[70] 李强强. 轧机压下系统机电液耦合特征分析及振动控制[D]. 太原:太原理工大学,2016. LI Qiangqiang. Machinery-electric-hydraulic coupling characteristics analysis and vibration control of mill screw down system[D]. Taiyuan:Taiyuan University of Technology,2016.
[71] 凌启辉,赵前程,王宪,等. 热连轧机机液耦合动力学系统控制参数优化[J]. 振动与冲击,2017,36(16):73-78. LING Qihui,ZHAO Qiancheng,WANG Xian,et al. Control parameter optimization of a hydraulic-mechanical coupling system of hot strip tandem mill[J]. Journal of Vibration and Shock,2017,36(16):73-78.
[72] YUN I S. Chatter in rolling[D]. Evanston,IL:Northwestern University,1995.
[73] HU P H. Stability and chatter in rolling[D]. Evanston, IL:Northwestern University,1995.
[74] 范小彬,臧勇. 热连轧机横向-垂向耦合振动研究[J]. 机械设计与制造,2011(4):93-95. FAN Xiaobin,ZANG Yong. Hot rolling mill horizontal-vertical coupling vibration[J]. Machinery Design & Manufacture,2011(4):93-95.
[75] 凌启辉,赵前程,王宪,等. 热连轧机工作辊水平-垂直非线性振动特性及抑制[J]. 中国机械工程,2017,28(16):1943-1950. LING Qihui,ZHAO Qiancheng,WANG Xian,et al. Work roll horizontal-vertical nonlinear vibration characteristics and suppression of hot strip tandem mills[J]. China Mechanical Engineering,2017,28(16):1943-1950.
[76] SWITONIOWSKI A. Interdependence between rolling mill vibrations and the plastic deformation process[J]. Journal of Materials Processing Technology,1996,61(4):354-364.
[77] 闫晓强,史灿,曹曦,等. CSP轧机扭振与垂振耦合研究[J]. 振动、测试与诊断,2008,28(4):377-381. YAN Xiaoqiang,SHI Can,CAO Xi,et al. Research on coupled vertical-torsion vibration of mill-stand of CSP mill[J]. Journal of Vibration,Measurement and Diagnosis,2008,28(4):377-381.
[78] 史荣,赵静,彭艳,等. 基于实验研究的轧机垂扭耦合振动分析[J]. 实验力学,2012,27(3):319-325. SHI Rong,ZHAO Jing,PENG Yan,et al. Mill vertical-torsion coupling dynamic vibration analysis based on experimental study[J]. Journal of Experimental Mechanics,2012,27(3):319-325.
[79] 黄彬城,马维金,王俊元,等. 高速轧机耦合振动问题研究进展及评述[J]. 制造业自动化,2013,35(12):55-58. HUANG Bincheng,MA Weijin,WANG Junyuan,et al. Review of coupled vibration problems investigation of high-speed rolling mill[J]. Manufacturing Automation,2013,35(12):55-58.
[80] 柴斌虎. 基于对角矩阵解耦的轧机垂扭耦合振动控制研究[D]. 太原:中北大学,2015. CHAI Binhu. The research of mill vertical-torsional coupling vibration control based on a diagonal matrix decoupling method[D]. Taiyuan:North University of China,2015.
[81] 何兆奇,王志刚. 基于混合摩擦模型的轧机垂扭耦合特性分析[J]. 机械设计与制造,2016(4):153-160. HE Zhaoqi,WANG Zhigang. Analysis characteristic of vertical-torsion coupling of rolling mill based on mixed friction model[J]. Machinery Design and Manufacture, 2016(4):153-160.
[82] 马寅洲. 轧机垂扭耦合振动特性分析与控制措施研究[D]. 唐山:河北联合大学,2015. MA Yinzhou. Study on characteristic analysis and control measures of rolling mill vertical-torsion coupling vibration[D]. Tangshan:Hebei United University,2015.
[83] 于海峰. 板带轧机垂扭耦合振动控制系统研究[D]. 唐山:华北理工大学,2017. YU Haifeng. Study on control systems of rolling mill vertical-torsion coupling vibration[D]. Tangshan:North China University of Science and Technology,2017.
[84] HEIDARI A,FOROUZAN M R. Optimization of cold rolling process parameters in order to increasing rolling speed limited by chatter vibrations[J]. Journal of Advanced Research,2013,4:27-34.
[85] 谷立臣,段志善,张新民. 轧钢机结构耦合振动问题[J]. 西安冶金建筑学院学报,1994,26(3):243-248. GU Lichen,DUAN Zhishan,ZHANG Xinmin. Coupled vibration problem on mill's structure[J]. Journal of Xi'an Institute of Metallurgy and Architecture,1994,26(3):243-248.
[86] 石亚涛. 轧机主传动扭转-水平耦合振动系统的动力学研究[D]. 秦皇岛:燕山大学,2017. SHI Yatao. Study on the dynamics of the torsional-horizontal coupled vibration system of the main drive of rolling mills[D]. Qinhuangdao:Yanshan University,2017.
[87] PAN J Q,PAN J,MING R S,et al. Three-dimensional response and intensity of torsional vibration in a stepped shaft[J]. Journal of Sound and Vibration,2000,236(1):115-128.
[88] ZHENG Y,XIE Z,LI Y,et al. Spatial vibration of rolling mills[J]. Journal of Materials Processing Technology,2013,4(213):581-588.
[89] GAO C,DU G,LI R,et al. An analysis on strip vibration coupled with torsional vibration of main drive system of rolling mill[J]. Journal of Vibroengineering,2017,19(8):5679-5690.
[90] 王瑞鹏,彭艳,张阳,等. 轧机耦合振动机理研究[J]. 机械工程学报,2013,49(12):66-71. WANG Ruipeng,PENG Yan,ZHANG Yang,et al. Mechanism research of rolling mill coupled vibration,Journal of Mechanical Engineering,2013,49(12):66-71.
[91] 张飞. 轧机振动及其耦合效应研究[D]. 重庆:重庆大学,2014. ZHANG Fei. Research on coupled vibration of rolling mill[D]. Chongqing:Chongqing University,2014.
[92] 刘晓潺,臧勇,郜志英,等. 多方向耦合振动连轧机再生颤振建模及应用[J]. 中南大学学报(自然科学版), 2017,48(3):635-643. LIU Xiaochan,ZANG Yong,GAO Zhiying,et al. Multidirectional regenerative chatter model of tandem rolling mills and its application[J]. Journal of Central South University (Science and Technology),2017,48(3):635-643.
[93] 彭艳,孙建亮,张扬,等. 板带轧机稳定运行动力学模型体系及其工业应用[M]. 北京:机械工业出版社,2018. PENG Yan,SUN Jianliang,ZHANG Yang,et al. Dynamic model system of stable operation of strip mill and its industrial application[M]. Beijing:China Machine Press,2018.
[94] 张阳,彭艳,孙建亮,等. 板带轧机刚体柔体耦合振动系统的建模研究[J]. 机械强度,2016,38(3):429-434. ZHANG Yang,PENG Yan,SUN Jianliang,et al. Strip rolling mill's rigid-flexible coupling vibration modeling[J]. Journal of Mechanical Strength,2016,38(3):429-434.
[95] 张阳. 基于辊系刚柔耦合特性的板带轧机系统动力学建模研究[D]. 秦皇岛:燕山大学,2016. ZHANG Yang. Dynamic modeling research of rolling mill system based on the roll system's rigid and flexible coupling property[D]. Qinhuangdao:Yanshan University,2016.
[96] 侯东晓,刘彬,时培明,等. 分段非线性轧机辊系系统的分岔行为研究[J]. 振动与冲击,2010,29(12):132-135. HOU Dongxiao,LIU Bin,SHI Peiming,et al. Bifurcation of piecewise nonlinear roll system of rolling mill[J]. Journal of Vibration and Shock,2010,29(12):132-135.
[97] 刘浩然,刘飞,侯东晓,等. 多非线性弹性约束下轧机辊系振动特性[J]. 机械工程学报,2012,48(9):89-94. LIU Haoran,LIU Fei,HOU Dongxiao,et al. Vibration characteristics of mill rolls under multi-segment nonlinear elastic constraints[J]. Journal of Mechanical Engineering,2012,48(9):89-94.
[98] 刘飞. 轧机非线性垂振系统动力学特性及稳定性控制策略研究[D]. 秦皇岛:燕山大学,2015. LIU Fei. Study on dynamic and stability control strategy of the nonlinear vertical vibration system of rolling mill[D]. Qinhuangdao:Yanshan University,2015.
[99] 李鹏. 基于液压缸非线性刚度的板带轧机辊系振动特性及控制研究[D]. 秦皇岛:燕山大学,2017. LI Peng. Study on vibration characteristics and control of rolling mill based on nonlinear stiffness of hydraulic cylinder[D]. Qinhuangdao:Yanshan University,2017.
[100] WANG Z,WANG D. Dynamic characteristics of a rolling mill drive system with backlash in rolling slippage[J]. Journal of Materials Processing Technology,2000,97:69-73.
[101] DRZYMALA Z,SWIATONIOWSKI A,BAR A. Nonlinear vibrations in cold rolling mills[J]. Colloque Vibrations,2002,12(6):67-73.
[102] BAR A,BAR O. Types of mid-frequency vibrations appearing during the rolling mill operation[J]. Journal of Materials Processing Technology,2005,163(15):461-464.
[103] KROT P. Nonlinear vibrations and backlashes diagnosticsin the rolling mills drive trains[J]. ENOC,2008,30(6):26-30.
[104] KROT P. Dynamics and diagnostics of the rolling mills drivelines with non-smooth stiffness characteristics[C]//Proceeding of the 3rd International Conference on Nonlinear Dynamics. Kharkov,Ukraine,2010:115-120.
[105] 赵弘,白晶. 轧机振动及非线性分析[J]. 机械,2003,30(5):16-19. ZHAO Hong,BAI Jing. Analysis of rolling mill vibration and nonlinear[J]. Machinery,2003,30(5):16-19.
[106] 冷振华. 考虑齿轮变刚度的轧机主传动系统动力学研究[D]. 沈阳:东北大学,2009. LENG Zhenhua. Research on dynamic characteristics of rolling main drive system by taking into account of the gear variable stiffness[D]. Shenyang:Northeastern University,2009.
[107] SHI P,LIU B,HOU D. Global dynamic characteristic of nonlinear torsional vibration system under harmonically excitation[J]. Chinese Journal of Mechanical Engineering,2009,22(1):132-139.
[108] 时培明,夏克伟,刘彬,等. 含间隙多自由度轧机传动系统非线性扭振动力特性[J]. 机械工程学报,2012,48(17):57-64. SHI Peiming,XIA Kewei,LIU Bin,et al. Dynamics behaviors of rolling mill's nonlinear torsional vibration of multi-degree-of-freedom main drive system with clearance[J]. Journal of Mechanical Engineering,2012,48(17):57-64.
[109] 申延智,刘宏民,熊杰,等. 厚板轧机含间隙主传动系统混沌动力学分析[J]. 工程力学,2010,27(7):232-236. SHEN Yanzhi,LIU Hongmin,XIONG Jie,et al. Analysis of chaotic behavior of the main drive system with clearance of a heavey plate mill[J]. Engineering Mechanics,2010,27(7):232-236.
[110] 孙志辉,邹家祥. 轧制润滑摩擦对轧机振动的影响[J]. 重型机械,1998(6):25-27. SUN Zhihui,ZOU Jiaxiang. Influence of rolling lubrication friction on rolling mill vibration[J]. Heavy Machinery,1998(6):25-27.
[111] 刘浩然,刘飞,彭荣荣,等. 轧件滞后变形下板带轧机非线性振动特性研究[J]. 燕山大学学报,2013,37(3):240-249. LIU Haoran,LIU Fei,PENG Rongrong,et al. Nonlinear vibration characteristics of strip rolling mill under work piece hysteretic deformation[J]. Journal of Yanshan University,2013,37(3):240-249.
[112] FAN X,ZANG Y,JIN K. Research on strip hysteretic behavior and mill vertical vibration system nonlinear dynamics[J]. Applied Physics A,2016,122:877-889.
[113] 王桥医,黄海军,李志华. 金属属性加工工作界面非稳态润滑轧机振动控制[J]. 中南大学学报(自然科学版),2010,41(4):1418-1423. WANG Qiaoyi,HUANG Haijun,LI Zhihua. Control of mill vibration for unsteady lubrication based on metal-forming processes[J]. Journal of Central South University(Science and Technology),2010,41(4):1418-1423.
[114] FU K,ZANG Y,GAO Z. Partial film lubrication characteristics of inlet zone in cold strip rolling[J]. Journal of Tribology,2014,136(4):041502.
[115] FU K,ZANG Y,GAO Z,et al. Non-linear dynamics of inlet film thickness during unstedy rolling process[J]. Chinese Journal of Mechanical Engineering,2016,29(3):522-530.
[116] 侯东晓,徐良,时培明. 混合润滑状态下板带轧机垂直振动特性研究[J]. 振动与冲击,2021,40(24):243-248. HOU Dongxiao,XU Liang,SHI Peiming. A study on vertical vibration characteristics of strip mill under mixed lubrication[J]. Journal of Vibration and Shock,2021,40(24):243-248.
[117] 俞鹏程. 基于轧制界面润滑摩擦效应的轧机垂直振动特性研究[D]. 杭州:杭州电子科技大学,2023. YU Pengcheng. Study on vertical vibration characteristics of rolling mill based on lubrication and friction effect of rolling interface[D]. Hangzhou:Hangzhou Dianzi University,2023.
[118] 孙韵韵,肖会芳,徐金梧. 考虑轧制界面粗糙形貌的轧机辊系非线性振动特性研究[J]. 振动与冲击,2017,36(8):113-120. SUN Yunyun,XIAO Huifang,XU Jinwu. Nonlinear vibration characteristics of a rolling mill system considering the roughness of rolling interface[J]. Journal of Vibration and Shock,2017,36(8):113-120.
[119] BAR A,SWIATONIOWSKI A. Interdependence between the rolling speed and non-linear vibrations of the mill system[J]. Journal of Materials Processing Technology, 2004,155:2116-2121.
[120] KAPIL S,EBERHARD P,DWIVEDY S K. Nonlinear dynamic analysis of a parametrically excited cold rolling mill[J]. Journal of Manufacturing Science and Engineering,2014,136(4):4-12.
[121] 陈勇辉,史铁林,杨叔子. 四辊冷带轧机非线性参激振动的研究[J]. 机械工程学报,2003,39(4):56-60. CHEN Yonghui,SHI Tielin,YANG Shuzi. Study on parametrically excited nonlinear vibration of medium and heavy plate milling[J]. Journal of Mechanical Engineering,2003,39(4):56-60.
[122] 孟令启,徐如松,王建勋. 中厚板轧机非线性参激的振动[J]. 重庆大学学报,2008,31(4):393-396. MENG Lingqi,XU Rusong,WANG Jianxun. Parametrically excited nonlinear vibrations of medium and heavy plate milling[J]. Journal of Chongqing University,2008,31(4):393-396.
[123] 孟令启,杜勇,马生彪. 中厚板轧机垂直振动的非线性[J]. 吉林大学学报(工学版),2009,39(3):712-715. MENG Lingqi,DU Yong,MA Shengbiao. Non-linearity of vertical vibration of medium plate mill[J]. Journal of Jilin University(Engineering and Technology Edition),2009,39(3):712-715.
[124] 张瑞成,陈至坤,王福斌. 单辊驱动轧机水平非线性参激振动机理研究[J]. 振动与冲击,2010,29(6):105-108. ZHANG Ruicheng,CHEN Zhikun,WANG Fubin. Study on parametrically excited horizon nonlinear vibration in single-roll driving mill system[J]. Journal of Vibration and Shock,2010,29(6):105-108.
[125] 杨旭,李江昀,童朝南. 冷轧机垂向辊系非线性振动建模与稳定性分析[J]. 振动、测试与诊断,2013,33(2):303-307. YANG Xu,LI Jiangyun,TONG Chaonan. Nonlinear vibration modeling and stability analysis of vertical roller system in cold rolling mill[J]. Journal of Vibration,Measurement and Diagnosis,2013,33(2):303-307.
[126] 彭荣荣. 动态轧制过程下轧机辊系分岔与混沌特性[J]. 机械设计与制造,2015,6:75-79. PENG Rongrong. Study on bifurcation and chaos characteristics of rolling mill rolls under dynamic rolling process[J]. Machinery Design and Manufacture,2015,6:75-79.
[127] 彭荣荣,巩长芬,王国威,等. 动态轧制力下冷连轧机超亚谐共振特性分析[J]. 机械设计与制造,2018,8:49-55. PENG Rongrong,GONG Changfen,WANG Guowei,et al. Analysis of super-harmonic and sub-harmonic resonance characteristics of tandem cold mill under dynamic rolling force[J]. Machinery Design and Manufacture,2018,8:49-55.
[128] HE D,XU H,WANG T,et al. Quasi-periodic oscillations of roll system in corrugated rolling mill in resonance[J]. Mathematics,2021,9:3201-3214.
[129] HE D,XU H,WANG T,et al. Nonlinear time-delay feedback controllability for vertical parametrically excited vibration of roll system in corrugated rolling mill[J]. Metallurgical Research & Technology,2020,117(2):1-12.
[130] 和东平,王涛,解加全,等. 波纹辊轧机辊系主共振分岔控制研究[J]. 机械工程学报,2020,56(7):109-118. HE Dongping,WANG Tao,XIE Jiaquan,et al. Research on principal resonance bifurcation control of roller system in corrugated rolling mills[J]. Journal of Mechanical Engineering,2020,56(7):109-118.
[131] 和东平,王涛,解加全,等. 波纹辊轧机辊系垂直非线性参激振动特性分析[J]. 振动与冲击,2019,38(20):164-171. HE Dongping,WANG Tao,XIE Jiaquan,et al. An analysis on parametrically excited nonlinear vertical vibration of a roller system in corrugated rolling mills[J]. Journal of Vibration and Shock,2019,38(20):164-171.
[132] 和东平,王涛,任忠凯,等. 波纹辊轧机辊系主共振时滞反馈控制[J]. 控制理论与应用,2020,37(7):1552-1561. HE Dongping,WANG Tao,REN Zhongkai,et al. Principal resonance time-delay feedback control of roller system in corrugated rolling mills[J]. Control Theory and Applications,2020,37(7):1552-1561.
[133] 和东平,徐慧东,王涛,等. 基于动态轧制力的波纹辊轧机非线性振动研究[J]. 钢铁,2021,56(6):70-77. HE Dongping,XU Huidong,WANG Tao,et al. Nonlinear vibration of corrugated rolling mill based on dynamic rolling force[J]. Iron and Steel,2021,56(6):70-77.
[134] HOFMANN W,HEINRICH A. Reductions of chatter marks during the temper rolling of steel strips[J]. Stahl und Eisen,1998,118(3):69-72.
[135] WANG L,FRAYMAN Y. A dynamically generated fuzzy neural network and its application to torsional vibration control of tandem cold rolling mill spindles[J]. Engineering Applications of Artificial Intelligence,2002,15(6):541-550.
[136] ORLOWSKA-KOWALSKA T,SZABAT K. Damping of torsional vibrations in two-Mass system using adaptive sliding neuro-fuzzy Approach[J]. IEEE Transactions on Industrial Informatics,2008,4(1):47-57.
[137] KHRAMSHIN V R,EVDOKIMOV A S,KORNILOV G P,et al. System for speed mode control of the electric drives of the continuous train of the hot-rolling mill[C]//International Siberian Conference on Control and Communications,IEEE,2015:1-6.
[138] 方一鸣,王志杰,解云鹏,等. 轧机液压伺服位置系统多模型切换滑模变结构控制[J]. 电机与控制学报,2010,14(5):91-96. FANG Yiming,WANG Zhijie,XIE Yunpeng,et al. Sliding mode variable structure control of multi-model switching for rolling mill hydraulic servo position system[J]. Electric Machines and Control,2010,14(5):91-96.
[139] 刘乐,方一鸣,李建雄,等. 可逆冷带轧机速度张力多变量耦合系统的建模及分散控制[J]. 控制理论与应用,2014,31(1):42-48. LIU Le,FANG Yiming,LI Jianxiong,et al. Modeling and decentralized control for speed and tension multivariable coupling system of reversible cold strip mill[J]. Control Theory & Applications,2014,31(1):42-48.
[140] 刘飞. 轧机非线性垂振系统动力学特性及稳定性控制策略研究[D]. 秦皇岛:燕山大学,2015. LIU Fei. Study on dynamics and stability control strategy of the nonlinear vertical vibration system of rolling mill[D]. Qinhuangdao:Yanshan University,2015.
[141] 姜甲浩. 基于轧制力和摩擦力非线性约束的轧机辊系稳定性及控制研究[D]. 秦皇岛:燕山大学,2017. JIANG Jiahao. Study on stability and control of mill roll system based on nonlinear constraint of rolling force and friction force[D]. Qinhuangdao:Yanshan University,2017.
[142] ROTHER A,JELALI M,SOFFKER D. A brief review and a first application of time-frequency-based analysis methods for monitoring of strip rolling mills[J]. Journal of Process Control,2015,35:65-79.
[143] KIMURA Y,FUJITA N,MATSUBARA Y,et al. High-speed rolling by hybrid-lubrication system in tandem cold rolling mills[J]. Journal of Materials Processing Technology,2015,216(1):357-368.
[144] WEHR M,STOCKERT S,ABEL D,et al. Rapid control prototyping in cold rolling using piezoelectric actuators[J]. IFAC-PapersOnLine,2016,49(31):55-60.
[145] FUJITA N,KIMURA Y,KOBAYASHI K,et al. Dynamic control of lubrication characteristics in high speed tandem cold rolling[J]. Journal of Materials Processing Technology,2016,229:407-416.
[146] 范小彬,臧勇,王会刚. 热连轧机垂直振动特性研究[J]. 中国机械工程,2010(15):1801-1804. FAN Xiaobin,ZANG Yong,WANG Huigang. Research on vertical vibration of hot rolling mill[J]. China Mechanical Engineering,2010(15):1801-1804.
[147] 闫晓强. 连轧机振动控制重要进展综述[J]. 冶金设备,2013(2):55-57. YAN Xiaoqiang. Important progress on tandem rolling mill vibration control[J]. Metallurgical Equipment, 2013(2):55-57.
[148] 黄彬城,马维金,王俊元,等. 高速轧机振动问题研究综述[J]. 轧钢,2013,30(4):38-42. HUANG Bincheng,MA Weijin,WANG Junyuan,et al. Review of vibration problems investigation of high-speed rolling mill[J]. Steel Rolling,2013,30(4):38-42.
[149] 闫晓强,么爱东,刘克飞. 液压弯辊控制参数对热连轧机振动能量影响研究[J]. 振动与冲击,2016,35(11):41-46. YAN Xiaoqiang,YAO Aidong,LIU Kefei. Effect of hydraulic bending roll on vibration energy of a hot continuous rolling mill[J]. Journal of Vibration and Shock,2016,35(11):41-46.
[150] WANG M,XU H,HE D,et al. Design of a damped vibration absorber to control the resonant vibration of roll[J]. Mechanical Systems and Signal Processing,2022,178:10926.
[151] XU H,WANG M,HE D,et al.Vibration transmission and energy dissipation of roll controlled by particle damping absorber[J]. International Journal of Mechanical Sciences,2023,249:108264.

板带轧机振动理论研究进展

Review of Theoretical Studies on Vibration in Strip Rolling Mill

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	冯青松, 杨舟, 郭文杰. 基于振幅放大机制的周期钢弹簧浮置板轨道结构低频振动控制[J]. 机械工程学报, 2024, 60(3): 155-169.
[2]	和东平, 蒋莉, 徐慧东, 刘元铭, 王涛. 轧机工作辊水平非线性振动及智能衬板吸振[J]. 机械工程学报, 2024, 60(20): 108-119.
[3]	胡银龙, 徐进, 程昌俊, 周辉, 蔡旭昊. 基于机电惯容的漂浮式海上风力机无源振动控制[J]. 机械工程学报, 2023, 59(5): 202-211.
[4]	刘广宇, 宫岛, 周劲松, 任利惠, 王泽根, 孙维光, 唐继烈. 基于车体模态振动提取方法的高速动车组车体减振设计[J]. 机械工程学报, 2023, 59(18): 239-250.
[5]	郭晓强, 柳军, 王建勋, 李潇, 魏安超, 朱海燕. 超高温高压曲井钻柱纵-横-扭耦合振动模型及黏滑振动特性研究[J]. 机械工程学报, 2022, 58(5): 119-135.
[6]	肖望强, 陈辉, 许展豪, 王兴民, 贾尚帅, 潘德阔. 基于颗粒阻尼的内燃动车组动力包构架多工况减振研究[J]. 机械工程学报, 2022, 58(4): 250-257.
[7]	王晓波, 祝长生. 基于相位偏移自适应LMS算法的电磁轴承柔性转子系统多频激励补偿控制[J]. 机械工程学报, 2021, 57(17): 110-119.
[8]	李志农, 刘杰, 卢文秀, 褚福磊. 转子系统盘轴松动故障动力学建模和仿真研究[J]. 机械工程学报, 2020, 56(7): 60-71.
[9]	王晓宇, 王浩威, 闫雪梅, 从强, 季宏丽, 裘进浩. 空间柔性天线展开臂的半主动振动控制研究[J]. 机械工程学报, 2020, 56(5): 116-122.
[10]	贺尓铭, 熊波, 杨佳佳. 基于TMD-HMD的海上浮式风力机主被动综合振动控制[J]. 机械工程学报, 2020, 56(3): 73-79.
[11]	严博, 马洪业, 韩瑞祥, 王珂, 武传宇. 可用于大幅值激励的永磁式非线性隔振器[J]. 机械工程学报, 2019, 55(11): 169-175.
[12]	陈雪峰, 张兴武, 曹宏瑞. 智能主轴状态监测诊断与振动控制研究进展[J]. 机械工程学报, 2018, 54(19): 58-69.
[13]	彭艳, 牛山. 板带轧机板形控制性能评价方法综述^*[J]. 机械工程学报, 2017, 53(6): 26-44.
[14]	魏振东, 李宝仁, 杜经民, 林磊, 谭发兵. 基于声子晶体理论的舰船液压管路支承用隔振器轴向振动带隙特性研究[J]. 机械工程学报, 2016, 52(15): 91-98.
[15]	李刚汪中厚耿直朱文敏. 基于非特征分块插值技术的准双曲面齿轮数字化真实齿面建模方法[J]. 机械工程学报, 2015, 51(7): 77-84.