电解加工电源研究现状及发展趋势

doi:10.3901/JME.2021.13.201

机械工程学报 ›› 2021, Vol. 57 ›› Issue (13): 201-213.doi: 10.3901/JME.2021.13.201

扫码分享

电解加工电源研究现状及发展趋势

罗红平^1,2,3, 张清荣^1,2,3, 刘桂贤^1,2,3, 张永俊^1,2,3

1. 广东工业大学机电工程学院广州 510006;
2. 广东工业大学广州市非传统制造技术及装备重点实验室广州 510006;
3. 广东工业大学省部共建精密电子制造技术与装备国家重点实验室广州 510006

收稿日期:2020-07-15 修回日期:2020-12-27 出版日期:2021-07-05 发布日期:2021-08-31
通讯作者: 刘桂贤(通信作者),男,1987年出生,博士后,副教授,硕士研究生导师。主要研究方向为电化学加工、电火花加工和超声加工工艺装备。E-mail:gxliu@gdut.edu.cn
作者简介:罗红平,男,1978年出生,博士,副教授,硕士研究生导师。主要研究方向为特种加工、精密制造、微细加工。E-mail:luohongping@gdut.edu.cn
基金资助:
国家自然科学基金资助项目（51705088，51775119）

The State of the Art and Development of Power Supply Technology in ECM

LUO Hongping^1,2,3, ZHANG Qingrong^1,2,3, LIU Guixian^1,2,3, ZHANG Yongjun^1,2,3

1. School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou 510006;
2. Guangzhou Key Laboratory of Non-traditional Machining Technology and Equipment, Guangdong University of Technology, Guangzhou 510006;
3. State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment Jointly Built by Province and Ministry, Guangdong University of Technology, Guangzhou 510006

Received:2020-07-15 Revised:2020-12-27 Online:2021-07-05 Published:2021-08-31

摘要/Abstract

摘要： 电解加工电源是电解加工装备中的关键核心基础设备，其性能直接影响着电解加工的精度、稳定性、表面质量和经济性。为了更加充分发挥电解工艺的潜力和优势，实现精密、高效、稳定的电解加工，有必要对电解加工电源的研究现状及发展趋势进行系统梳理和全面总结。系统分析了宏观尺度电解加工和微细电解加工的工艺原理，加工质量、效率和工艺稳定性等的影响因素，归纳总结出不同类别、不同应用场合下电解工艺对加工电源的性能指标要求。较为全面地介绍了近年来国内外在电解加工电源方面的相关研究进展及应用情况。对电解加工电源在控制高频脉冲产生、信号处理与输出、加工间隙监测、电源保护等几个方面的关键技术进行了评述，同时对电解加工电源的发展趋势进行了预测和展望，为促进我国电解加工技术的快速发展和广泛应用提供有益的参考。

关键词: 电解加工, 电源, 微细电解加工, 高频, 脉冲

Abstract: As the key basic device in electrochemical machining (ECM) system, ECM power supply directly influences the machining accuracy, process stability, surface quality and economy of ECM. To fully release the potential and take the advantages of ECM, it is necessary to systematically review the research literature of ECM power supply and predict its' development trend. Based on the systematic analyses of the processing principle of macro-scale ECM and electrochemical micromachining (ECMM), and the influencing factors of machining quality, efficiency and process stability of these two types of machining, the performance requirements for ECM power supply for different machining type and various applications of ECM are summarized. The related research progress of ECM power supply at home and abroad in recent years are comprehensively introduced. Then, several key technologies of ECM power supply in control, high frequency pulse generation, signal processing and output, machining gap detection,power supply protection are summarized. At the same time, the development trend of ECM power supply is predicted and prospected, which provides a reference for promoting the rapid development and wide application of ECM technology in China.

Key words: electrochemical machining, power supply, electrochemical micromachining, high frequency, pulse

中图分类号:

TG662

罗红平, 张清荣, 刘桂贤, 张永俊. 电解加工电源研究现状及发展趋势[J]. 机械工程学报, 2021, 57(13): 201-213.

LUO Hongping, ZHANG Qingrong, LIU Guixian, ZHANG Yongjun. The State of the Art and Development of Power Supply Technology in ECM[J]. Journal of Mechanical Engineering, 2021, 57(13): 201-213.

参考文献

[1] CHEN Y, JIANG L, FANG M, et al. Multi-time scale simulation of pulse electrochemical machining process with multi-physical model[J]. The International Journal of Advanced Manufacturing Technology, 2020, 110(7-8):2203-2210.
[2] 王建业. 电解加工原理及应用[M]. 北京:国防工业出版社, 2001.WANG Jianye. Principle and application of electrochemical machining[M]. Beijing:National Defense Industry Press, 2001.
[3] AKMD S, ALTENA H, MCGEOUGH J A. Precision ECM by process characteristic modelling[J]. CIRP Annals-Manufacturing Technology, 2000, 49(1):151-155.
[4] SCHUSTER R, KIRCHNER V, ALLONGUE P, et al. Electrochemical micromachining[J]. Science. 2000, 289(5476):98-101.
[5] 王峰, 赵建社, 刘鼎明, 等. 钛合金深窄槽可控振动辅助电解加工试验研究[J]. 中国机械工程. 2019, 30(20):2395-2402.WANG Feng, ZHAO Jianshe, LIU Dingming, et al.Experimental research on controllable vibration assisted ECM of deep narrow grooves of titanium alloy[J]. China Mechanical Engineering, 2019, 30(20):2395-2402.
[6] BHATTACHARYYA B, MUNDA J, MALAPATI M. Advancement in electrochemical micro-machining[J]. International Journal of Machine Tools and Manufacture, 2004, 44(15):1577-1589.
[7] ZHANG C, YAO J, ZHANG C, et al. Electrochemical milling of narrow grooves with high aspect ratio using a tube electrode[J]. Journal of Materials Processing Technology, 2020, 282:116695.
[8] XU L, PAN Y, ZHAO C. Distance effects in electrochemical micromachining[J]. Scientific Reports, 2016, 6(1):31778.
[9] 王建业, 王晓燕. MOSFET高频、窄脉冲电解加工新型电源试验研究[J]. 航空制造技术, 2001(1):27-29.WANG Jianye, WANG Xiaoyan. The experimental investigations of the up-to-date MOSFET HSPECM power[J]. Aeronautical Manufacturing Technology, 2001(1):27-29.
[10] 戴立强, 怀华培, 朱海波, 等. 1000A精密脉冲电解加工电源的研制[C]//第17届全国特种加工学术会议, 2017-11-17, 中国, 广州. 2017:574-576. DAI Liqiang, HUAI Huapei, ZHU Haibo, et al. Development of 1000A precision pulsed electrolytic machining power supply[C]//The 17th National Conference on Special Machining. Special Processing Branch of Chinese Mechanical Engineering Society, 2017-11-17, Guangzhou, Guangdong, China:2017.574-576.
[11] 诸跃进, 冯青. 一种微秒级脉冲电解加工工程化电源研制[J]. 电加工与模具, 2010(1):61-66.ZHU Yuejin, FENG Qing. Research on the industrialization power supply for microsecond-grade pulse electrochemical machining[J]. Electromachining & Mould, 2010(1):61-66.
[12] MARTINEZ A R, GRANDA U R E E, ZUNIGA L M, et al. Pulsed power supply for electrochemical machining[C]//2015 IEEE International Autumn Meeting on Power, Electronics and Computing, November 4-6. 2015, Ixtapa, Mexico:ROPEC, 2015:1-6.
[13] 刘桂贤, 张永俊, 罗红平, 等. 基于SOPC技术的脉冲电解加工电源的研究[J]. 电加工与模具, 2015(5):27-30.LIU Guixian, ZHANG Yongjun, LUO Hongping, et al. Study on Electrochemical machining pulse power supply based on SOPC technology[J]. Electromachining & Mould, 2015(5):27-30.
[14] 刘桂贤, 张永俊, 罗红平, 等. 大导程滚珠螺母滚道电解加工机床[J]. 电加工与模具, 2016(1):59-61.LIU Guixian, ZHANG Yongjun, LUO Hongping, et al. Electrochemical machine tool for manufacturing large-lead ball nut raceway[J]. Electrochemical & Mould, 2016(1):59-61.
[15] 刘桂贤, 罗红平, 张永俊, 等. 基于SOPC技术的电解加工高频脉冲电源:中国, 201410338053.4[P]. 2014-11-05.LIU Guixian, LUO Hongping, ZHANG Yongjun, et al. Electrochemical machining high frequency pulse power source based on SOPC technology:China, 201410338053.4[P]. 2014-11-05.
[16] LIU G, LUO H, ZHANG Y, et al. Pulse electrochemical machining of large lead ball nut raceway using a spherical cathode[J]. The International Journal of Advanced Manufacturing Technology, 2016, 85(1-4):191-200.
[17] 张传运.大导程滚珠螺母滚道电解铣削新方法研究[D]. 广州:广东工业大学, 2020.ZHANG Chuanyun. Research on new method of electrochemical milling ball nut inner raceway[D]. Guangzhou:Guangdong University of Technology, 2020.
[18] 李红英, 程小元, 张明岐. 双极性脉冲精密振动电解加工技术[C]//第14届全国特种加工学术会议, 2011-10-22, 中国, 苏州. 2011:402-406.LI Hongying, CHENG Xiaoyuan, ZHANG Mingqi. Bipolar pulse precision vibration assisted electrochemical machining technology[C] The 14th National Conference on special machining. October 12, 2011, Suzhou, China. 2011:402-406.
[19] MENG L, ZENG Y, ZHU D. Wire electrochemical micromachining of Ni-based metallic glass using bipolar nanosecond pulses[J]. International Journal of Machine Tools and Manufacture, 2019, 146:103439.
[20] 金兴伟. 双极性高频脉冲电解电源的研制及工艺试验的研究[D]. 广州:广东工业大学, 2009.JIN Xingwei. Development of bipolar high-frequency pulse power supply for ECM and experiments[D]. Guangzhou:Guangdong University of Technology, 2009.
[21] NATSU W, KURAHATA D. Influence of ECM pulse conditions on WC alloy micro-pin fabrication[J]. Procedia CIRP, 2013, 6:401-406.
[22] LI Z, JIANG X, GE J, et al. Research of small deep curved hole electrochemical machining based on pulse power supply[C]//2019 22nd International Conference on Electrical Machines and Systems, August 11-14, 2019, Harbin, China:ICEMS, 2019:1-4.
[23] GAO C, QU N, HE H, et al. Double-pulsed wire electrochemical micro-machining of type-304 stainless steel[J]. Journal of Materials Processing Technology, 2019, 266:381-387.
[24] 王思聪, 後藤昭弘, 中田篤史. 单极性电源电解加工硬质合金的研究[J]. 电加工与模具, 2018(4):40-44.WANG Sicong, GOTO A, NAKATA A. Study on electrochemical machining of sintered carbide with monopolar-pulse power supply[J]. Electromachining & Mould, 2018(4):40-44.
[25] KOCK M, KIRCHNER V, SCHUSTER R. Electrochemical micromachining with ultrashort voltage pulses-a versatile method with lithographical precision[J]. Electrochimica Acta, 2003, 48(20-22):3213-3219.
[26] SPIESER A, IVANOV A. Design of an electrochemical micromachining machine[J]. International Journal of Advanced Manufacturing Technology, 2015, 78(5):737-752.
[27] QIN S, DENG H. Electrochemical etching of tungsten for fabrication of sub-10-nm tips with a long taper and a large shank[J]. Nanomanufacturing and Metrology, 2019, 2(4):235-240.
[28] KIM B H, NA C W, LEE Y S, et al. Micro electrochemical machining of 3D micro structure using dilute sulfuric acid[J]. CIRP Annals-Manufacturing Technology, 2005, 54(1):191-194.
[29] 张朝阳, 朱荻, 王明环, 等. 超短脉冲电流微细电解加工技术研究[J]. 中国机械工程, 2005, 16(14):1295-1298.ZHANG Zhaoyang, ZHU Di, WANG Minghuan, et al. Investigation on electrochemical micro-machining using ultra-short voltage pulses[J]. China Mechanical Engineering, 2005, 16(14):1295-1298
[30] 马晓宇. 阵列孔微细电解加工基础技术研究[D]. 北京:清华大学, 2010.MA Xiaoyu. Research on fundamental techniques of micro ECM for array hole fabrication[D]. Beijing:Tsinghua University, 2010.
[31] SCHUSTER R. Electrochemical microstructuring with short voltage pulses[J]. Chem. Phys. Chem., 2007, 8(1):34-39.
[32] SPIESER A, IVANOV A. Design of a pulse power supply unit for micro-ECM[J]. The International Journal of Advanced Manufacturing Technology, 2015, 78(1-4):537-547.
[33] PARK M S, CHU C N. Micro-electrochemical machining using multiple tool electrodes[J]. Journal of Micromechanics and Microengineering, 2007, 17(8):1451-1457.
[34] GIANDOMENICO N, MEYLAN O. Development of a new generator for electrochemical micro-machining[J]. Procedia CIRP, 2016, 42:804-808.
[35] 李小海, 赵万生, 王振龙. 微细电解加工脉冲电源的研制[J]. 电加工与模具. 2004(5):56-58.LI Xiaohai, ZHAO Wansheng, WANG Zhenlong. Research on a high frequency short pulse power supply for electrolytic micromachining[J]. Electromachining & Mould, 2004, (5):56-58.
[36] 张朝阳. 纳秒脉冲电流微细电解加工技术研究[D]. 南京:南京航空航天大学, 2006.ZHANG Zhaoyang. The investigation on the electrochemical micromachining (ECMM) with nanosecond-pulse current[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2006.
[37] ZHANG Y, TANG Y, LIU X, et al. Development of ultra-short pulse power supply applicable to micro-ECM[J]. Materials Science Forum, 2009, 626-627:369-374.
[38] 朱永伟, 邵健, 苏楠, 等. 同步超声振动调制微细放电-电解加工技术[J]. 机械工程学报, 2014, 50(1):185-192.ZHU Yongwei, SHAO Jian, SU Nan, et al. Research on micro electro-discharged & electrolysis machining technology modulated by synchronizing ultrasonic vibrating[J]. Journal of Mechanical Engineering, 2014, 50(1):185-192.
[39] 孔全存. 微细电解加工三电极脉冲电源及基础工艺研究[D]. 北京:清华大学, 2015.KONG Quancun. Research on three-electrode pulse power supply and fundamental process of micro ECM[D].Beijing:Tsinghua University, 2015.
[40] 王琨宁. 基于静电驱动的微细电解电火花复合加工脉冲电源研究[D]. 深圳:哈尔滨工业大学, 2017.WANG Kunning. Research on pulse power for micro ECDM based on electrostatic actuator[D]. Shenzhen:Harbin Institute of Technology, 2017.
[41] 朱保国. 脉冲电化学微细加工关键技术研究[D]. 哈尔滨:哈尔滨工业大学, 2007.ZHU Baoguo. Research on key techniques of pulses electrochemical micromachining[D]. Harbin:Harbin Institute of Technology, 2007.
[42] XU L, WANG X, ZHAO C. Electrochemical micromachining with sinusoidal signals[J]. Journal of the Electrochemical Society, 2019, 166(10):E275-E279.
[43] PATEL D S, SHARMA V, JAIN V K, et al. Reducing overcut in electrochemical micromachining process by altering the energy of voltage pulse using sinusoidal and triangular waveform[J]. International Journal of Machine Tools and Manufacture, 2020, 151:103526.
[44] LI D, YANG S, WU Y, et al. Microstructure of electrochemical machining using mask by dual power supply[J]. The International Journal of Advanced Manufacturing Technology, 2017, 89(9-12):3101-3108.
[45] KOYANO T, KUNIEDA M. Ultra-short pulse ECM using electrostatic induction feeding method[J]. Procedia CIRP, 2013, 6:390-394.
[46] HAN W, KUNIEDA M. Research on servo feed control of electrostatic induction feeding micro-ECM[J]. Precision Engineering, 2016, 45:195-202.
[47] HAN W, KUNIEDA M. Fabrication of micro-rods with electrostatic induction feeding ECM[J]. Journal of Materials Processing Technology, 2016, 235:92-104.
[48] XU L, ZHAO C. Nanometer-scale accuracy electrochemical micromachining with adjustable inductance[J]. Electrochimica Acta, 2017, 248:75-78.
[49] ZHAO C, BAI X, XU L. Controlled electrochemical nanomachining with adjustable capacitance[J]. Journal of The Electrochemical Society, 2018, 165(7):E269-E273.
[50] 付文淼. 反馈控制微细电化学加工技术研究[D]. 秦皇岛:燕山大学, 2018.FU Wenmiao. Study on electrochemical machining micro technology with feedback control[D]. Qinghuangdao:Yanshan University, 2018.
[51] 赵传军. 可控脉冲微细电解加工技术研究[D]. 秦皇岛:燕山大学, 2019.ZHAO Chuanjun. Research on controllable pulse electrochemical micromachining technology[D]. Qinghuangdao:Yanshan University, 2019.
[52] MOLE T, MCDONALD B, MULLERY S, et al. The development of a pulsed power supply for μECM[J]. Procedia CIRP, 2016, 42:809-814.
[53] SAXENA K K, QIAN J, REYNAERTS D. A review on process capabilities of electrochemical micromachining and its hybrid variants[J]. International Journal of Machine Tools and Manufacture. 2018, 127:28-56.
[54] BURKERT S, SCHULZE H P, Gmelin T, et al. The pulse electrochemical micromachining (PECMM)[J]. International Journal of Material Forming, 2009, 2(S1):645-648.
[55] SCHULZE H P, HERZIG M, KRONING O. Differentiation of process-energy-sources (PES) in pulsed electrochemical machining (PECM) based on their controllability[C]//International Symposium on Electrochemical Machining Technology 2016, Novembe 17-18, 2016, Mechelen, the Northeastern Town of Brussels, Belgium:INSEC, 2016:15-20.
[56] HAN F, CHEN W, YING W, et al. Effects of polarization on machining accuracy in pulse electrochemical machining[J]. Procedia CIRP, 2018, 68:493-498.
[57] LYUBIMOV V V, VOLGIN V M, VENEVTSEV A Y, et al. Microelectrochemical machining at the ultrasmall interelectrode gaps with the use of the packets of nanosecond voltage pulses[J]. Procedia CIRP, 2016, 42:831-836.
[58] CLIFTON D, MOUNT A R, ALDER G M, et al. Ultrasonic measurement of the inter-electrode gap in electrochemical machining[J]. International Journal of Machine Tools and Manufacture, 2002, 42(11):1259-1267.
[59] 王贤成, 狄士春, 迟关心, 等. 间隙平均电流检测在高频窄脉冲电解加工中的应用[J]. 航空精密制造技术, 2006(2):36-38.WANG Xiancheng, DI Shichun, CHI Guanxin, et al. Gap average current measuring applied in HSPECM[J]. Aviation Precision Manufacturing Technology, 2006(2):36-38.
[60] LU Y, LIU K, ZHAO D. Experimental investigation on monitoring interelectrode gap of ECM with six-axis force sensor[J]. The International Journal of Advanced Manufacturing Technology, 2011, 55(5-8):565-572.
[61] LI Y, ZHENG Y, YANG G, et al. Localized electrochemical micromachining with gap control[J]. Sensors and Actuators A:Physical, 2003, 108(1-3):144-148.
[62] 孔全存, 李勇, 朱效谷, 等. 基于双电层电容的微细电解加工间隙的在线检测[J]. 纳米技术与精密工程, 2013, 11(6):529-535.KONG Quancun, Li Yong, Zhu Xiaogu, et al. On line detection of micro electrochemical machining gap based on electric double layer capacitor[J] Nanotechnology and Precision Engineering, 2013, 11(6):529-535.
[63] ZHAO W, LI X, WANG Z. Study on micro electrochemical machining at micro to meso-scale[C]//Proceedings of the 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems. January 18-21, 2006, Zhuhai, China, 2006:325-329.
[64] KOYANO T, KUNIEDA M. Micro electrochemical machining using electrostatic induction feeding method[J]. CIRP Annals, 2013, 62(1):175-178.
[65] KANG M, LI H, FU X. Measurement of electrochemical machining initial gap based on machine vision[J]. Advanced Materials Research, 2011, 230-232:1190-1194.
[66] CHEN W, HAN F. Short-circuit avoidance in electrochemical machining based on polarization voltage during pulse off time[J]. The International Journal of Advanced Manufacturing Technology, 2019, 102(5-8):2531-2539.
[67] 范延涛, 赵建社, 袁立新, 等. 随动参比电压短路保护系统及其电解加工工艺研究[J]. 电加工与模具, 2019(S1):39-42.FAN Yantao, ZHAO Jianshe, YUAN Lixin, et al. Study on the random reference voltage short circuit protection system and its electrolytic processing process[J]. Electrical Processing and Tooling, 2019(S1):39-42.
[68] SHIU C, WU W, HUANG P. The Research of FPGA-based short current protection for micro electrochemical machining[J]. Key Engineering Materials, 2015, 656-657:398-403.
[69] 张建华, 葛红宇, 李宏胜, 等. 微细电化学加工纳秒脉冲电源的研制[J]. 制造技术与机床, 2011(10):37-40.ZHANG Jianhua, GE Hongyu, LI Hongsheng, et al. Development of nanosecond pulsed power supply for microfabrication electrochemical processing[J]. Manufacturing Technology and Machine Tools, 2011(10):37-40.

电解加工电源研究现状及发展趋势

The State of the Art and Development of Power Supply Technology in ECM

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	陈钊杰, 谢晋, 刘军汉, 熊长新, 李迪帆. 脉冲放电驱动磨料流辅助磨削单晶碳化硅研究[J]. 机械工程学报, 2024, 60(9): 383-392.
[2]	任忠凯, 李赫, 许雅楠, 程前, 冯浩, 王涛. 脉冲电场辅助碳素钢极薄带拉伸变形的本构模型和微观组织演变[J]. 机械工程学报, 2024, 60(6): 245-260.
[3]	赵传军, 王冀鹏, 许立忠. 基于等效物理模型的脉冲电解微加工精度及定域性表征研究[J]. 机械工程学报, 2024, 60(5): 378-389.
[4]	张婷婷, 许振波, 王艳, 卞功波, 王涛, 王文先. 高频脉冲电流辅助镁/铝合金一步轧焊复合板制备及界面接合机理[J]. 机械工程学报, 2024, 60(4): 305-315.
[5]	王佩, 程雨旺, 李新浩, 姚静, 吴柳杰. 等编码数字流量控制单元编码变换与控制方法[J]. 机械工程学报, 2024, 60(2): 287-301.
[6]	袁晓明, 王宁, 王卫东, 张立杰, 朱勇. 自激振荡脉冲空化射流喷嘴谐振机理及协同优化研究[J]. 机械工程学报, 2024, 60(16): 377-389.
[7]	彭子龙, 吴金印, 王萌杰, 李一楠, 兰红波. 电场驱动微尺度3D打印掩膜电解加工微结构[J]. 机械工程学报, 2024, 60(15): 420-436.
[8]	王俊, 杨轶青, 刘金朝, 沈长青, 黄伟国, 朱忠奎. 小波核编码的脉冲卷积神经网络在可解释性智能诊断中的应用研究[J]. 机械工程学报, 2024, 60(12): 41-50.
[9]	程进杰, 石文泽, 卢超, 魏运飞, 陈尧, 陈果. 脉冲压缩技术在高温连铸电磁超声测厚应用研究[J]. 机械工程学报, 2023, 59(8): 20-31.
[10]	沙力撒, 刘剑. 脉冲磁场处理对硬质合金钻针钻削性能的影响[J]. 机械工程学报, 2023, 59(7): 176-185.
[11]	宿磊, 谈世宏, 吉勇, 明雪飞, 顾杰斐, 李可. 基于训练局部字典的倒装芯片高频超声检测信号稀疏去噪方法[J]. 机械工程学报, 2023, 59(6): 10-17.
[12]	张永飞, 鲁文其, 杨亮亮, 吴文俊, 朱其新. 基于全速域混合控制的同步磁阻电机无传感器矢量控制系统[J]. 机械工程学报, 2023, 59(5): 223-234.
[13]	王登勇, 乐华勇, 朱荻. 薄壁回转体表面岛屿状高凸台结构旋印电解加工成形过程研究[J]. 机械工程学报, 2023, 59(3): 337-348.
[14]	陶海军, 肖群星, 张金生. 单相级联H桥逆变电源及其矢量控制^*[J]. 电气工程学报, 2023, 18(3): 196-205.
[15]	万晓东, 马平, 万东红. 基于DG无功参与的配电网综合无功优化[J]. 电气工程学报, 2023, 18(3): 260-267.