FAST望远镜馈源舱精度分析研究

doi:10.3901/JME.2017.17.036

机械工程学报 ›› 2017, Vol. 53 ›› Issue (17): 36-42.doi: 10.3901/JME.2017.17.036

• 特邀专栏:500 m口径球面射电望远镜（FAST） • 上一篇下一篇

扫码分享

FAST望远镜馈源舱精度分析研究

姚蕊, 李庆伟, 孙京海, 孙才红, 朱文白

中国科学院国家天文台北京 100012

收稿日期:2017-02-28 修回日期:2017-04-06 出版日期:2017-09-05 发布日期:2017-09-05
作者简介:姚蕊,女,1983年出生,副研究员。主要研究方向为并联机构、天文技术与方法。E-mail:ryao@nao.cas.cn
基金资助:
国家自然科学基金（11203048）和中科院青年创新促进会专项资助项目

Accuracy Analysis on Focus Cabin of FAST

YAO Rui, LI Qingwei, SUN Jinghai, SUN Caihong, ZHU Wenbai

National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012

Received:2017-02-28 Revised:2017-04-06 Online:2017-09-05 Published:2017-09-05

摘要/Abstract

摘要： 500 m口径球面射电望远镜（Five-hundred meter aperture spherical radio telescope，FAST）馈源舱主要用于实现馈源的精调定位，馈源舱的精度控制机构即其内部的Stewart平台，根据控制方案可将馈源舱的精度分析研究简化为该Stewart平台的精度分析研究。根据馈源舱实际工况及控制方案，提出三类馈源舱定位精度主要影响因素，基于索驱动控制误差分析及舱索耦合情况，分析得到为避免舱索耦合而形成的馈源舱控制残差；考虑馈源舱的低刚度性，基于Stewart平台控制方案及结构变形分析参数，采用蒙特卡洛与区间分析方法得到结构变形造成的馈源舱定位误差；分析馈源舱实际测量手段得到测量误差，最终得到三类影响因素下馈源舱定位精度综合评估值。通过建立半物理仿真模型，使用仿真软件模拟实际工况及舱索耦合特性，以实际的馈源舱内机构为试验对象，试验验证了馈源舱精度分析的准确性，并为馈源舱后续调试及应用提供了必要的控制参数和参考。

关键词: Stewart平台, 半物理仿真, 精度分析, 射电望远镜

Abstract: Focus cabin is used for precise positioning of feeds of the five-hundred meter aperture spherical radio telescope (FAST). According to the control scheme,Stewart platform in the focus cabin is the adjusting mechanism to realize precise positioning of the feeds.Therefore,the accuracy analysis of the focus cabin can be simplified to the accuracy analysis of the Stewart platform.Three kinds influence factors of feeds positioning is proposed based on the real work situation and control scheme of the focus cabin.By analyzing the control accuracy of the six-cable driven parallel robot and the coupling of the focus cabin and the cables,residual control error of the focus cabin is obtained.Considering the low stiffness of the Stewart platform and its structure deformation analysis,positioning accuracy of the focus cabin is studied by using Monte Carlo and interval analysis method based on the control scheme of the Stewart platform.Meanwhile,positioning error of the focus cabin caused by measurement error is given.Therefore, the comprehensive positioning accuracy evaluation value of the focus cabin can be obtained.Setting up a semi-physical simulation model by using the actual focus cabin and a simulation software to simulate actual working conditions and the coupling characteristics of the cables and the focus cabin,experiment results on the semi physical simulation model verify the positioning accuracy of the focus cabin,and provide necessary reference and debugging parameters of the focus cabin in the real work.

Key words: accuracy analysis, radio telescope, semi-physical simulation, Stewart platform

中图分类号:

P111
TP2

姚蕊, 李庆伟, 孙京海, 孙才红, 朱文白. FAST望远镜馈源舱精度分析研究[J]. 机械工程学报, 2017, 53(17): 36-42.

YAO Rui, LI Qingwei, SUN Jinghai, SUN Caihong, ZHU Wenbai. Accuracy Analysis on Focus Cabin of FAST[J]. Journal of Mechanical Engineering, 2017, 53(17): 36-42.

参考文献

[1] NAN Rendong. Five hundred meter aperture spherical radio telescope (FAST)[J]. Science in China:Series G Physics, Mechanics & Astronomy, 2006, 49(2):129-148.
[2] ZHU Wenbai, NAN Rendong, REN Gexue. Modeling of a feed support system for FAST[J]. Experimental Astronomy, 2005, 17(1-3):177-184.
[3] TANG Xiaoqiang, ZHU Wenbai, SUN Chaihong, et al. Similarity model of feed support system for FAST[J]. Experimental Astronomy, 2011, 29(3):177-187.
[4] 朱文白. FAST望远镜天文规划和馈源支撑的相关研究[D]. 北京:中国科学院研究生院, 2006. ZHU Wenbai. Study on astronomical planning and feed support system of FAST telescope[D]. Beijing:Graduate University of Chinese Academy of Sciences, 2006.
[5] 黄真,孔令富,方跃法,等. 并联机器人机构学理论及控制[M]. 北京:机械工业出版社, 1997. HUANG Zhen, KONG Lingfu, FANG Yuefa, et al. Theory and control of parallel robot mechanism[M]. Beijing:China Machine Press, 1997.
[6] EF F. A Stewart-platform based manipulator:General theory and practical construction[J]. International Journal of Robotics Research, 1986, 5(2):157-182.
[7] SHAO Zhufeng, TANG Xiaoqiang, CHEN Xu, et al. Research on the inertia matching of the Stewart parallel manipulator[J]. Robotics and Computer Integrated Manufacturing, 2012, 28(6):649-659.
[8] YAO Rui, TANG Xiaoqiang, LI Tiemin, et al. Error analysis and distribution of 6-SPS and 6-PSS reconfigurable parallel manipulators[J]. Tsinghua Science and Technology, 2010, 15:547-554.
[9] 谢平,杜义浩,田培涛,等. 一种并联机器人误差综合补偿方法[J]. 机械工程学报, 2012, 48(9):43-49. XIE Ping, DU Yihao, TIAN Peitao, et al. A parallel robot error comprehensive compensation method[J]. Journal of Mechanical Engineering, 2012, 48(9):43-49.
[10] ZHANG Xinyu, LI Hui, YAO Rui, et al. Free vibration model and experimental study of the FAST cable-driven parallel mechanism[J]. International Journal of Advancements in Computing Technology, 2012, 4(20):310-320.
[11] 李辉,朱文白,潘高峰. FAST望远镜馈源支撑中的力学问题及其研究进展[J]. 力学进展, 2011(2):133-154. LI Hui, ZHU Wenbai, PAN Gaofeng. Mechanics in the feed support of FAST telescope and its research progress[J]. Advances In Mechanics, 2011(2):133-154.
[12] 张新宇. FAST望远镜馈源支撑若干关键问题研究[D]. 北京:中国科学院大学, 2012. ZHANG Xinyu. Study on several key problems of the FAST telescope support system[D]. Beijing:Uninversity of Chinese Academy of Sciences, 2012.
[13] YAO Rui, ZHU Wenbai, HUANG Peng. Accuracy analysis of Stewart platform based on interval analysis method[J]. Chinese Journal of Mechanical Engineering, 2013, 26(1):29-34.

[1]	冯树飞, 班友, 连培园, 王伟. 大型全可动射电望远镜结构设计进展与挑战[J]. 机械工程学报, 2024, 60(13): 330-344.
[2]	刘检华, 张志强, 夏焕雄, 巩浩, 邵楠. 考虑表面形貌与受力变形的装配精度分析方法[J]. 机械工程学报, 2021, 57(3): 207-219.
[3]	刘常海, 胡敏, 杨庆俊, 冯伟, 包钢, 曾亿山. 波浪能发电半物理仿真试验技术研究[J]. 机械工程学报, 2021, 57(10): 286-296.
[4]	那强, 李博, 陶建国, 于金山, 樊世超. 多构态星球车质心测量方法与试验研究[J]. 机械工程学报, 2019, 55(12): 19-28.
[5]	王凯, 徐明林, 解鹏, 徐振, 陶淑苹. 空间高光谱相机调焦机构精度分析与试验[J]. 机械工程学报, 2019, 55(12): 29-36.
[6]	张文虎, 邓四二, 陈国定, 胡永乐. 圆柱滚子轴承半物理仿真试验技术研究[J]. 机械工程学报, 2018, 54(19): 78-87.
[7]	李庆伟, 姜鹏, 南仁东. 500 m口径射电望远镜索网与面板单元自适应连接机构设计分析^*[J]. 机械工程学报, 2017, 53(7): 62-68.
[8]	李庆伟, 姜鹏, 南仁东. FAST反射面面板单元初始间隙[J]. 机械工程学报, 2017, 53(17): 4-9.
[9]	朱万旭, 覃荷瑛, 李居泽, 欧进萍. 基于锚固区外置光纤光栅传感器的FAST工程拉索索力监测研究[J]. 机械工程学报, 2017, 53(17): 23-30.
[10]	段清娟, 殷成熙, 段宝岩. FAST 50 m模型馈源支撑系统的结构参数优化[J]. 机械工程学报, 2017, 53(17): 31-35.
[11]	刘钰;高峰. FAST反射面支承索网结构的初始状态求解[J]. , 2013, 49(6): 66-73.
[12]	楚中毅;马静;李丹. 空间柔性伸杆机构振动抑制的半物理仿真试验[J]. , 2012, 48(21): 8-14.
[13]	杨琤;周富强. 镜像式单摄像机双目视觉传感器的结构设计[J]. , 2011, 47(22): 7-12.
[14]	刘大炜;王立平;关立文. 一个特殊3自由度并联机构的精度分析及标定[J]. , 2010, 46(9): 46-51.
[15]	李辉;朱文白;潘高峰. 500 m口径球面射电望远镜进舱缆线连接机构的设计及其静力学分析[J]. , 2010, 46(7): 7-15.

FAST望远镜馈源舱精度分析研究

Accuracy Analysis on Focus Cabin of FAST

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价