机械工程学报 ›› 2019, Vol. 55 ›› Issue (8): 46-55.doi: 10.3901/JME.2019.08.046
王琥, 李启迪, 李光耀
收稿日期:
2018-07-17
修回日期:
2018-12-14
出版日期:
2019-04-20
发布日期:
2019-04-20
通讯作者:
王琥(通信作者),男,1975年出生,博士,教授,博士研究生导师。主要研究方向为复杂产品CAE技术、快速计算方法、结构优化和高性能计算方法等。E-mail:wanghu@hnu.edu.cn
作者简介:
李启迪,男,1995年出生。主要研究方向为复合材料不确定性分析。E-mail:l543696395@hnu.edu.cn;李光耀,男,1963年出生,博士,教授,博士研究生导师。主要研究方向为汽车CAE技术。
基金资助:
WANG Hu, LI Qidi, LI Guangyao
Received:
2018-07-17
Revised:
2018-12-14
Online:
2019-04-20
Published:
2019-04-20
摘要: 变刚度复合材料是一种高性能材料,其连续变化的铺丝角度相比传统直纤维具有更大设计裕度,但其设计、制造难度也相应增加。充分发挥变刚度复合材料的性能,亟待性能更好、更高效的全局优化方法。受制造工艺的掣肘,目前的变刚度复合材料仍有诸多缺陷。缺陷的存在使仿真结果严重偏离实际,进而严重影响系统的可靠性和安全性,甚至可能导致相关系统的失效。然而,业内却缺少对于变刚度复合材料不确定性分析的研究。主要对变刚度复合材料优化策略和不确定性分析进行综合评述,论述变刚度复合材料建模方法、优化方法和不确定性分析技术的研究历程和技术发展,并根据当前变刚度复合材料的发展现状和主要成果,从优化、分析和制造等方面对其未来发展提出几点建议。
中图分类号:
王琥, 李启迪, 李光耀. 变刚度复合材料结构设计方法及不确定性分析研究进展[J]. 机械工程学报, 2019, 55(8): 46-55.
WANG Hu, LI Qidi, LI Guangyao. Review on Structure Design and Uncertainty Analysis of Variables Stiffness Composites[J]. Journal of Mechanical Engineering, 2019, 55(8): 46-55.
[1] 沈观林,胡更开,刘彬. 复合材料力学[M]. 北京:清华大学出版社,2013. SHEN Guanlin,HU Gengkai,LIU Bin. Mechanics of composite materials[M]. Beijing:Tsinghua University Press,2013. [2] 杜善义. 先进复合材料与航空航天[J]. 复合材料学报,2007,24(1):1-12. DU Shanyi. Advanced composite materials and aeronautics and astronautics[J]. Acta Materiae Compositae Sinica,2007,24(1):1-12. [3] ERDAL O,SONMEZ F O. Optimum design of composite laminates for maximum buckling load capacity using simulated annealing[J]. Composite Structures,2005,71(1):45-52. [4] WU J,BURGUEÑO R,WU J,et al. An integrated approach to shape and laminate stacking sequence optimization of free-form FRP shells[J]. Computer Methods in Applied Mechanics and Engineering,2006,195(33-36):4106-4123. [5] ABDALLA M M,SETOODEH S,GÜRDAL Z. Design of variable-stiffness composite panels for maximum buckling load[J]. Composite Structures,2009,87(1):109-117. [6] DÍAZ J,FAGIANO C,ABDALLA M M,et al. A study of interlaminar stresses in variable stiffness plates[J]. Composite Structures,2012,94(3):1192-1199. [7] PEETERS D M J,LOZANO G G,ABDALLA M M. Effect of steering limit constraints on the performance of variable stiffness laminates[J]. Computers and Structures,2018,196:94-111. [8] LOPES C S,CAMANHO P P,GÜRDAL Z,et al. Progressive failure analysis of tow-placed,variable- stiffness composite panels[J]. International Journal of Solids and Structures,2007,44(25):8493- 8516. [9] 刘润兵. 纤维增强复合材料变角度层合板的力学特性研究[D]. 哈尔滨:哈尔滨工业大学,2012. LIU Runbing. Research on the mechanical performance of fiber reinforced composite variable angle laminates[D]. Harbin:Harbin Institute of Technology,2012. [10] LOPES C S. Damage and failure of non-conventional composite laminates[D]. Delft:Delft University of Technology,2009. [11] TATTING B F,GUERDAL Z,JEGLEY D. Design and Manufacture of Elastically Tailored Tow Placed Plates:America,CR-2002-211919[P]. 2002-08-01. [12] BLOM A W,STICKLER P B,GURDAL Z. Design and manufacture of a variable-stiffness cylindrical shell[C]//SAMPE Europe. Proceedings of the SAMPE Europe 30th International Conference,March 23-25,2009,Paris,France. Oerlingen:SAMPE Europe,2009:1-8. [13] KIM B C,POTTER K,WEAVER P M. Continuous tow shearing for manufacturing variable angle tow composites[J]. Composites Part A,2012,43(8):1347-1356. [14] KIM B C,WEAVER P M,POTTER K. Manufacturing characteristics of the continuous tow shearing method for manufacturing of variable angle tow composites[J]. Composites Part A Applied Science and Manufacturing,2014,61(3):141-151. [15] LOZANO G G,TIWARI A,TURNER C,et al. A review on design for manufacture of variable stiffness composite laminates[J]. Proceedings of the Institution of Mechanical Engineers,Part B:Journal of Engineering Manufacture,2016,230(6):981-992. [16] 孔斌,顾杰斐,陈普会,等. 变刚度复合材料结构的设计、制造与分析[J]. 复合材料学报,2017,34(10):2121-2133. KONG Bin,GU Jiefei,CHEN Puhui,et al. Design,manufacture and analysis of variable stiffness composite structures[J]. Acta Materiae Compositae Sinica,2017,34(10):2121-2133. [17] GURDAL Z,OLMEDO R. In-plane response of laminates with spatially varying fiber orientations- variable stiffness concept[J]. AIAA Journal,1993,31(4):751-758. [18] HONDA S,NARITA Y. Vibration design of laminated fibrous composite plates with local anisotropy induced by short fibers and curvilinear fibers[J]. Composite Structures,2011,93(2):902-910. [19] 秦永利,祝颖丹,范欣愉,等. 纤维曲线铺放制备变刚度复合材料层合板的研究进展[J]. 玻璃钢/复合材料,2012(1):61-66. QIN Yongli,ZHU Yingdan,FAN Xinyu,et al. research and development on variable-stiffness composite laminates manufactured by variable angle tow placement[J]. Fiber Reinforced Plastics/Composites,2012(1):61-66 [20] BRAMPTON C J,WU K C,KIM H A. New optimization method for steered fiber composites using the level set method[J]. Structural and Multidisciplinary Optimization,2015,52(3):493-505. [21] BLOM A W,TATTING B F,HOL J M A M,et al. Fiber path definitions for elastically tailored conical shells[J]. Composites Part B,2009,40(1):77-84. [22] GÜRDAL Z,TATTING B F,WU C K. Variable stiffness composite panels:Effects of stiffness variation on the in-plane and buckling response[J]. Composites Part A Applied Science and Manufacturing,2008,39(5):911-922. [23] ROUHI M,GHAYOOR H,HOA S V,et al. Effect of structural parameters on design of variable-stiffness composite cylinders made by fiber steering[J]. Composite Structures,2014,118(1):472-481. [24] HAO P,YUAN X,LIU H,et al. Isogeometric buckling analysis of composite variable-stiffness panels[J]. Composite Structures,2017,165(1):192-208. [25] WANG B,ZHU S,HAO P,et al. Buckling of quasi-perfect cylindrical shell under axial compression:A combined experimental and numerical investigation[J]. International Journal of Solids and Structures,2018,130:232-247. [26] TIAN K,WANG B,HAO P,et al. A high-fidelity approximate model for determining lower-bound buckling loads for stiffened shells[J]. International Journal of Solids and Structures,2018,148:14-23. [27] HAO P,YUAN X,LIU C,et al. An integrated framework of exact modeling,isogeometric analysis and optimization for variable-stiffness composite panels[J]. Computer Methods in Applied Mechanics and Engineering,2018,339(1):205-238. [28] NIK M A,FAYAZBAKHSH K,PASINI D,et al. Surrogate-based multi-objective optimization of a composite laminate with curvilinear fibers[J]. Composite Structures,2012,94(8):2306-2313. [29] PASSOS A G,LUERSEN M A,STEEVES C A. Optimal curved fiber orientations of a composite panel with cutout for improved buckling load using the Efficient Global Optimization algorithm[J]. Engineering Optimization,2017,49(8):1354-1372. [30] PASSOS A G,LUERSEN M A. Multi-objective optimization of laminated composite parts with curvilinear fibers using Kriging-based approaches[J]. Structural and Multidisciplinary Optimization,2018,57(3):1115-1127. [31] NIK M A,FAYAZBAKHSH K,PASINI D,et al. A comparative study of metamodeling methods for the design optimization of variable stiffness composites[J]. Composite Structures,2014,107(1):494-501. [32] YE F,WANG H,LI G. Variable stiffness composite material design by using support vector regression assisted efficient global optimization method[J]. Structural and Multidisciplinary Optimization,2017,56(1):203-219. [33] COBURN B H,WEAVER P M. Buckling analysis,design and optimization of variable-stiffness sandwich panels[J]. International Journal of Solids and Structures,2016,96:217-228. [34] HONDA S,IGARASHI T,NARITA Y. Multi-objective optimization of curvilinear fiber shapes for laminated composite plates by using NSGA-Ⅱ[J]. Composites Part B Engineering,2013,45(1):1071-1078. [35] MONTEMURRO M,CATAPANO A. On the effective integration of manufacturability constraints within the multi-scale methodology for designing variable angle-tow laminates[J]. Composite Structures,2017,161:145-159. [36] BLOM A W,STICKLER P B,GÜRDAL Z. Optimization of a composite cylinder under bending by tailoring stiffness properties in circumferential direction[J]. Composites Part B,2010,41(2):157-165. [37] HUANG G,WANG H,LI G. An efficient reanalysis assisted optimization for variable-stiffness composite design by using path functions[J]. Composite Structures,2016,153:409-420. [38] MEJLEJ V G,FALKENBERG P,TÜRCK E,et al. Optimization of variable stiffness composites in automated fiber placement process using evolutionary algorithms[J]. Procedia CIRP,2017,66:79-84. [39] IRISARRI F X,PEETERS D M J,ABDALLA M M. Optimization of ply drop order in variable stiffness laminates[J]. Composite Structures,2016,152:791-799. [40] NIK M A,FAYAZBAKHSH K,PASINI D,et al. Optimization of variable stiffness composites with embedded defects induced by Automated Fiber Placement[J]. Composite Structures,2014,107:160-166. [41] SABIDO A,BAHAMONDE L,HARIK R,et al. Maturity assessment of the laminate variable stiffness design process[J]. Composite Structures,2017,160:804-812. [42] GHIASI H,FAYAZBAKHSH K,PASINI D,et al. Optimum stacking sequence design of composite materials Part Ⅱ:Variable stiffness design[J]. Composite Structures,2010,93(1):1-13. [43] SRIRAMULA S,CHRYSSANTHOPOULOS M K. Quantification of uncertainty modelling in stochastic analysis of FRP composites[J]. Composites Part AApplied Science and Manufacturing,2009,40(11):1673-1684. [44] CROFT K,LESSARD L,PASINI D,et al. Experimental study of the effect of automated fiber placement induced defects on performance of composite laminates[J]. Composites Part A Applied Science and Manufacturing,2011,42(5):484-491. [45] FALCÓ O,MAYUGO J A,LOPES C S,et al. Variable-stiffness composite panels:Defect tolerance under in-plane tensile loading[J]. Composites Part A Applied Science and Manufacturing,2014,63(18):21-31. [46] MAROUENE A,BOUKHILI R,CHEN J,et al. Effects of gaps and overlaps on the buckling behavior of an optimally designed variable-stiffness composite laminates-A numerical and experimental study[J]. Composite Structures,2016,140:556-566. [47] LI Q,WANG H,ZENG Y,et al. A D-vine copula-based coupling uncertainty analysis for stiffness predication of variable-stiffness composite[J]. Composite Structures,2018,219:221-241. [48] MESOGITIS T S,SKORDOS A A,LONG A C. Uncertainty in the manufacturing of fibrous thermosetting composites:A review[J]. Composites Part A:Applied Science and Manufacturing,2014,57:67-75. [49] SRIRAMULA S,CHRYSSANTHOPOULOS M K. Quantification of uncertainty modelling in stochastic analysis of FRP composites[J]. Composites Part A Applied Science and Manufacturing,2009,40(11):1673-1684. [50] STEFANOU G. The stochastic finite element method:Past,present and future[J]. Computer Methods in Applied Mechanics and Engineering,2009,198(9):1031-1051. [51] VANMARCKE E,SHINOZUKA M,NAKAGIRI S,et al. Random fields and stochastic finite elements[J]. Structural Safety,1986,3(3):143-166. [52] PARK J S,KIM C G,HONG C S. Stochastic finite element method for laminated composite structures[J]. Journal of Reinforced Plastics and Composites,1995,14(7):675-693. [53] FALSONE G,IMPOLLONIA N. A new approach for the stochastic analysis of finite element modelled structures with uncertain parameters[J]. Computer Methods in Applied Mechanics and Engineering,2002,191(44):5067-5085. [54] CUI X Y,HU X B,ZENG Y. A copula-based perturbation stochastic method for fiber-reinforced composite structures with correlations[J]. Computer Methods in Applied Mechanics and Engineering,2017,322:351-372. [55] HU X B,CUI X Y,LIANG Z M,et al. The performance prediction and optimization of the fiber-reinforced composite structure with uncertain parameters[J]. Composite Structures,2017,164:207-218. [56] SAKATA S,TORIGOE I. A successive perturbation-based multiscale stochastic analysis method for composite materials[J]. Finite Elements in Analysis and Design,2015,102:74-84. [57] ZHOU X Y,GOSLING P D,PEARCE C J,et al. Perturbation-based stochastic multi-scale computational homogenization method for the determination of the effective properties of composite materials with random properties[J]. Computer Methods in Applied Mechanics and Engineering,2016,300(1):84-105. [58] ZHOU X Y,GOSLING P D,ULLAH Z,et al. Exploiting the benefits of multi-scale analysis in reliability analysis for composite structures[J]. Composite Structures,2016,155:197-212. [59] ZHOU X Y,GOSLING P D,PEARCE C J,et al. Perturbation-based stochastic multi-scale computational homogenization method for woven textile composites[J]. International Journal of Solids and Structures,2016,80:368-380. [60] HIEN T D,NOH H C. Stochastic isogeometric analysis of free vibration of functionally graded plates considering material randomness[J]. Computer Methods in Applied Mechanics and Engineering,2017,318:845-863. [61] LAL A,PALEKAR S P,MULANI S B,et al. Stochastic extended finite element implementation for fracture analysis of laminated composite plate with a central crack[J]. Aerospace Science and Technology,2017,60:131-151. [62] GHANEM R G,SPANOS P D. Stochastic finite elements:a spectral approach[M]. New York:Springer,1991. [63] SEPAHVAND K. Spectral stochastic finite element vibration analysis of fiber-reinforced composites with random fiber orientation[J]. Composite Structures,2016,145:119-128. [64] SEPAHVAND K. Stochastic finite element method for random harmonic analysis of composite plates with uncertain modal damping parameters[J]. Journal of Sound Vibration,2017,400:1-12. [65] SEPAHVAND K,MARBURG S,SEPAHVAND K,et al. Spectral stochastic finite element method in vibroacoustic analysis of fiber-reinforced composites[J]. Procedia Engineering,2017,199:1134-1139. [66] SEPAHVAND K,MARBURG S. Identification of composite uncertain material parameters from experimental modal data[J]. Probabilistic Engineering Mechanics,2014,37(4):148-153. [67] SEPAHVAND K,SCHEFFLER M,MARBURG S. Uncertainty quantification in natural frequencies and radiated acoustic power of composite plates:Analytical and experimental investigation[J]. Applied Acoustics,2015,87(87):23-29. [68] XIU D. Numerical methods for stochastic computations:A spectral method approach[J]. Communications in Computational Physics,2010,5(2-4):242-272. [69] CHEN X,QIU Z. A Novel uncertainty analysis method for composite structures with mixed uncertainties including random and interval variables[J]. Composite Structures,2017,184:400-410. [70] JEONG H K,SHENOI R A. Probabilistic strength analysis of rectangular FRP plates using Monte Carlo simulation[J]. Computers and Structures,2000,76(1-3):219-235. [71] DUAN W,WANG Z. Vibration reliability analysis of turbine blade based on ANN and Monte Carlo simulation[J]. Journal of Vibration Measurement and Diagnosis,2010,32(1):1-4. [72] DEY S,NASKAR S,MUKHOPADHYAY T,et al. Uncertain natural frequency analysis of composite plates including effect of noise-A polynomial neural network approach[J]. Composite Structures,2016,143:130-142. [73] DEY S,MUKHOPADHYAY T,ADHIKARI S. Metamodel based high-fidelity stochastic analysis of composite laminates:A concise review with critical comparative assessment[J]. Composite Structures,2017,171:227-250. [74] NGUYEN H X,HIEN T D,LEE J,et al. Stochastic buckling behavior of laminated composite structures with uncertain material properties[J]. Aerospace Science and Technology,2017,66:274-283. [75] STEFANOU G,SAVVAS D,PAPADRAKAKIS M. Stochastic finite element analysis of composite structures based on material microstructure[J]. Composite Structures,2015,132:384-392. [76] SAVVAS D,STEFANOU G,PAPADRAKAKIS M. Determination of RVE size for random composites with local volume fraction variation[J]. Computer Methods in Applied Mechanics and Engineering,2016,305:340-358. [77] STEFANOU G,SAVVAS D,PAPADRAKAKIS M. Stochastic finite element analysis of composite structures based on mesoscale random fields of material properties[J]. Computer Methods in Applied Mechanics and Engineering,2017,326:319-337. [78] REH S,BELEY J D,MUKHERJEE S,et al. Probabilistic finite element analysis using ANSYS[J]. Steel Construction,2008,28(1):17-43. |
[1] | 郭军礼, 董志波, 刘雪松, 王苹, 方洪渊. 基于等承载思想的低匹配T型接头设计[J]. 机械工程学报, 2019, 55(6): 1-10. |
[2] | 马铭璐, 邓帅, 赵力, 林杉, 张莹, 倪佳鑫, 苏文. 基于有机朗肯循环的太阳能驱动冷热电联供系统设计方法及性能分析[J]. 机械工程学报, 2019, 55(6): 178-185. |
[3] | 马雅丽, 李阳阳. 基于几何误差不确定性的滚动导轨运动误差研究[J]. 机械工程学报, 2019, 55(5): 11-18. |
[4] | 檀中强, 潘骏, 胡明, 贺青川, 陈文华. 基于椭球模型的机构非精确概率可靠性分析方法[J]. 机械工程学报, 2019, 55(2): 168-176. |
[5] | 彭海军, 施博洋, 王昕炜, 谢小辉, 孙立宁. 考虑区间不确定性的双摆吊车运动轨迹规划[J]. 机械工程学报, 2019, 55(2): 204-213. |
[6] | 夏侯唐凡, 刘宇, 张皓冬, 张成林. 考虑认知不确定性的多状态系统Birnbaum重要度分析方法[J]. 机械工程学报, 2018, 54(8): 223-232. |
[7] | 昝翔, 陈春良, 张仕新, 陈伟龙, 梅勇飞. 考虑时间不确定性的战时装备维修任务调度方法[J]. 机械工程学报, 2018, 54(24): 226-232. |
[8] | 王文选, 高行山, 周长聪. 基于点估计的矩独立重要性测度分析方法[J]. 机械工程学报, 2017, 53(8): 16-24. |
[9] | 郑昱, 孟凡伟, 杨占立, 易旺民. 基于试验设计方法和响应面方法的九索并联机构优化设计[J]. 机械工程学报, 2017, 53(17): 92-102. |
[10] | 魏琼, 焦宗夏, 吴帅, 王君, 汤亮. 气动伺服加载系统的非线性复合控制[J]. 机械工程学报, 2017, 53(14): 217-224. |
[11] | 王德伦, 申会鹏, 孙元, 董惠敏, 马雅丽. 复杂零件结构设计的概念单元方法[J]. 机械工程学报, 2016, 52(7): 152-163. |
[12] | 王念先, 王东雄, 陈奎生, 吴华春. 基于Halbach阵列的永磁轴承承载力解析模型及设计方法[J]. 机械工程学报, 2016, 52(3): 128-135. |
[13] | 魏莎, 韩勤锴, 褚福磊. 考虑不确定性因素的齿轮系统动力学研究综述[J]. 机械工程学报, 2016, 52(1): 1-19. |
[14] | 葛茂根, 王少明, 刘明周, 刘从虎, 邵将. 不确定环境下再制造发动机曲轴轴向间隙优化控制[J]. 机械工程学报, 2015, 51(8): 99-106. |
[15] | 刘长义, 刘明周, 刘从虎, 温海骏. 基于不确定性测度的再制造曲轴平衡性控制方法[J]. 机械工程学报, 2015, 51(5): 171-177. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||