软囊式水下力传感器的力学特性与设计原则

›› 2009, Vol. 45 ›› Issue (10): 15-21.

扫码分享

软囊式水下力传感器的力学特性与设计原则

王勇;刘正士;陈恩伟;陆益民;葛运建

合肥工业大学机械与汽车工程学院;中国科学院合肥智能机械研究所

发布日期:2009-10-15

Mechanical Characteristic and Design Principle of Underwater Force Sensor Based on Pressure Balance of Bladder

WANG Yong;LIU Zhengshi;CHEN Enwei;LU Yimin;GE Yunjian

School of Mechanical and Automotive Engineering, Hefei University of Technology Institute of Intelligent Machines, Chinese Academy of Sciences

Published:2009-10-15

摘要/Abstract

摘要： 以水下机器人用多轴力传感器的压力平衡结构为研究对象，基于液体的可压缩性，根据弹性薄壳力学分析，选择长壳理论研究软囊变形，并对其进行修正。指出软囊变形所引起的额外轴向力对设计和使用水下力传感器是不可忽视的，提出软囊式压力平衡传感器内外压力差的迭代算法，推导出软囊式压力平衡的内外压差、额外轴向力及相关公式。分析压力差在传感器上产生的额外轴向力及有关的影响因素，总结软囊式压力平衡能够胜任大压力平衡，且对大压力下的微小压力具有极强的平衡能力的特点。得出软囊式水下力传感器结构应紧凑、长径比应小、壁厚应尽可能小、内部存油液应少的设计原则。

关键词: 多轴力传感器, 水下机器人, 压力平衡

Abstract: In order to balance the hydraulic pressure acted on the multi-axis force sensor of underwater robot, the long-shell theory is selected to research the distortion of bladder used in the sensor and amendment of this theory is carried out based on the mechanics analysis of the long and the short thin shells. An iteration algorithm used to calculate the pressure difference between in and out of the sensor is put forward, which applies the pressure balance method of bladder. Formulas of pressure difference, additional axial force, etc, in the pressure balance method of bladder are educed. The relative factors especially the pressure difference which affects the extra axial force acting on the sensor are analyzed and the characteristics of the pressure balance method of bladder, namely being competent for high pressure balance and possessing a wonderful ability to balance the slight pressure under high pressure. The criterions in designing the structure of the underwater force sensor of bladder are brought forward, namely, compact structure, small length-diameter ratio, large pressure balance diaphragm, minimal wall thickness and little oil inside the structure.

Key words: Multi axis force sensor, Pressure balance, Underwater robot

中图分类号:

TP212

王勇;刘正士;陈恩伟;陆益民;葛运建. 软囊式水下力传感器的力学特性与设计原则[J]. , 2009, 45(10): 15-21.

WANG Yong;LIU Zhengshi;CHEN Enwei;LU Yimin;GE Yunjian. Mechanical Characteristic and Design Principle of Underwater Force Sensor Based on Pressure Balance of Bladder[J]. , 2009, 45(10): 15-21.

[1]	向红标, 陈卓, 刘霁莹, 宋阳, 张冕, 王收军. 磁控微型软体四足水下机器人双模式运动特性的仿真与试验[J]. 机械工程学报, 2023, 59(11): 179-188.
[2]	常宗瑜, 张扬, 郑方圆, 郑中强, 王吉亮. 水下机器人-机械手系统研究进展：结构、建模与控制[J]. 机械工程学报, 2020, 56(19): 53-69.
[3]	李艳生, 孙汉旭. 小型球形水底观测机器人设计分析与实现[J]. 机械工程学报, 2020, 56(13): 103-109.
[4]	于福杰, 陈原, 李庆中. 基于虚拟工作空间约束的AUVMS协调运动规划[J]. 机械工程学报, 2020, 56(12): 249-264.
[5]	刘贵杰, 宫华耀, 吴乃龙, 闫茹, 李蒙蒙. 基于鱼类侧线感知机理的流场辨识方法及仿真研究^*[J]. 机械工程学报, 2016, 52(17): 162-167.
[6]	张铭钧;褚振忠. 自主式水下机器人自适应区域跟踪控制[J]. , 2014, 50(19): 50-57.
[7]	吴乃龙;刘贵杰;李思乐;徐萌. 基于人工免疫反馈的自治水下机器人推力器控制[J]. , 2011, 47(21): 22-27.
[8]	程大军;刘开周. 一种基于SUKF的广义行为环境建模及在远程AUV推进系统的应用研究[J]. , 2011, 47(19): 14-21.
[9]	袁伟杰;刘贵杰;朱绍锋. 基于遗传算法的自治水下机器人水动力参数辨识方法[J]. , 2010, 46(11): 96-100.
[10]	边宇枢;高志慧;贠超. 6自由度水下机器人动力学分析与运动控制[J]. , 2007, 43(7): 87-92.
[11]	王玉甲;张铭钧;金志贤. 水下机器人传感器及推进器状态监测系统[J]. , 2006, 42(增刊): 214-218.

软囊式水下力传感器的力学特性与设计原则

Mechanical Characteristic and Design Principle of Underwater Force Sensor Based on Pressure Balance of Bladder

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 11

编辑推荐

Metrics

本文评价