• CN:11-2187/TH
  • ISSN:0577-6686

›› 2010, Vol. 46 ›› Issue (12): 93-98.

• 论文 • 上一篇    下一篇

扫码分享

带有记忆合金弹簧的汽车半主动悬架随机振动的可靠性和最优控制

王洪礼;沈宇航;许佳;葛 根   

  1. 天津大学机械工程学院
  • 发布日期:2010-06-20

Reliability and Control on Vehicle Stochastic Vibration Based on Semi-active Suspension System with Shape Memory Alloy Spring

WANG Hongli;SHEN Yuhang;XU Jia;GE Gen   

  1. School of Mechanical Engineering, Tianjin University
  • Published:2010-06-20

摘要: 考虑轮胎材料不均匀等内部随机因素的影响,建立带有记忆合金弹簧的汽车半主动悬架振动模型,应用随机平均法将Hamilton函数表示为一维扩散过程,通过分析系统奇异边界性态,计算出系统发生首次穿越行为的条件,建立可靠性函数和首次穿越时间的概率密度函数的柯氏向后微分(Backward Kolmogorov,BK)方程,结合初始条件和边界条件给出首次穿越问题的提法,并进行数值计算。其结果显示,系统的稳定性被破坏的可能性随着时间的推移在逐渐的增大并且系统最终会变得不稳定,初始状态远离右边界时,其可靠性函数减小得很缓慢,在同一时间点上,系统稳定性被破坏得可能性变得越小。而随着初始状态逐渐远离右边界,系统稳定性最有可能被破坏的时刻在向后推移。通过添加控制器建立受控系统的模型,并利用随机动态规划原理导出以最大可靠性函数为目标的随机最优控制策略,并用有限差分法对受控系统的可靠性函数、首次穿越时间的概率密度函数进行数值仿真。数值计算结果表明,随着控制约束力的增大,系统状态停留在安全域的可能性增大,系统稳定状态被破坏的可能性降低。

关键词: 半主动悬架, 记忆合金弹簧, 可靠性函数, 首次穿越, 随机稳定性, 最优控制, 波纹度, 高速车辆, 振动, 轴承

Abstract: A semi-active suspension system with shape memory alloy(SMA) spring of vehicle is built, considering the impact of uneven tire materials and other internal random factors. The Hamilton function is expressed as one dimension diffusion process by using stochastic average method, by judging the modality of the singular boundary, the condition of the first-passage behavior is calculated, and the backward Kolmogorov equation for reliability function and probability density function of the first-passage time is established. On the basis, combined with the initial conditions and boundary conditions, the first-passage issue is derived, and the numerical simulation is done. The results show that the possibility of destruction of system stability gradually increases with time passing and the system eventually becomes unstable. When the initial state is away from the right border, its reliability function decreases very slowly. At the same time point, the former possibility becomes smaller. With the initial state being gradually away from the right border, the moment that stability of the system most likely to be damaged is delayed. The model of the controlled system is established by adding the control unit, and the optimal control strategy aiming at obtaining the maximal reliable function is derived by utilizing the dynamic programming principle. Numerical simulation of partial differential equations fitted for reliability function and probability density function of the first-passage time is carried out by using finite difference methods. Numerical results show that, with the increase of the constraining force of control, the possibility of the system state staying in the security domain increases, and the possibility of destruction of the system steady state decreases.

Key words: First-passage, Optimal control, Reliability function, Semi-active suspension, Shape memory alloy(SMA) spring, Stochastic stability, Bearing, High speed vehicle, Vibration, Waviness

中图分类号: