• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2026, Vol. 62 ›› Issue (17): 246-256.doi: 10.3901/JME.260721

• 特邀专栏:人形机器人与具身智能 • 上一篇    

扫码分享

人形机器人驱动传动结构一体化关节研制与应用

陈万楷1, 阮周杰1, 白华2, 江微杰3, 赵常屹1, 杨孔华1, 王凯1,2, 刘春宝1, 任露泉1   

  1. 1. 吉林大学机械与航空航天工程学院 长春 130022;
    2. 北京机械工业自动化研究所有限公司 北京 100120;
    3. 无锡泉智博科技有限公司 无锡 214112
  • 收稿日期:2025-08-18 修回日期:2026-03-28 发布日期:2026-11-20
  • 作者简介:陈万楷,1993年出生,男,博士研究生。主要研究方向为关节及机器人系统。E-mail:kevinchen@mail.motorevo.cn;刘春宝(通信作者),男,1979年出生,博士,教授,博士研究生导师。主要研究方向为智能控制技术,仿生机器人。E-mail:liuchunbao@jlu.edu.cn
  • 基金资助:
    国家自然科学基金资助项目(52405311)。

Design and Application of Joint with Integrated Drive and Transmission Mechanism for Humanoid Robots

CHEN Wankai1, RUAN Zhoujie1, BAI Hua2, JIANG Weijie3, ZHAO Changyi1, YANG Konghua1, WANG Kai1,2, LIU Chunbao1, REN Luquan1   

  1. 1. School of Mechanical and Aerospace Engineering, Jilin University, Changchun 130022;
    2. Beijing Research Institute of Automation for Machinery Industry Co., Ltd., Beijing 100120;
    3. Wuxi Quanzhibo Technology Co., Ltd., Wuxi 214112
  • Received:2025-08-18 Revised:2026-03-28 Published:2026-11-20

摘要: 针对具身智能人形机器人对高动态、高精度及高集成度关节驱动的迫切需求,提出了用于具身智能人形机器人的一体化关节,其将减速机、电机、传感器、驱动器一体化集成,开发了高动态、低时延、高控制带宽的控制系统,通过结构优化与轻量化设计、磁路和槽满率提升,开发系列化高功率密度产品。PA105型号的机器人关节峰值扭矩可达400 N·m,峰值扭矩密度大于200 N·m/kg,是满足新范式机器人场景需求的核心部件。研制了高度集成、可靠且支持多种通信模式的电机伺服驱动系统,对电机的温升、电流扭矩特性进行了实验验证,制定了高柔性、高精度的控制策略。目前,所提出的一体化关节及驱动系统已在乐聚机器人、星尘智能、星海图等人形机器人产品中完成应用验证,展现出优异的动态性能和可靠性。

关键词: 人形机器人, 一体化关节, 具身智能

Abstract: In response to the urgent need for high-dynamic, high-precision and highly integrated joint drives in embodied intelligent humanoid robots, this study introduces integrated robotic joints for Embodied intelligent robot, which integrates with motor, reducer, encoder and driver. A control system with high dynamic response, low delay and high control bandwidth is developed. Serialized products is developed by structural optimization, lightweight design and improved magnetic circuit and slot utilization rate. The model PA105 integrated robotic joint had a peak torque of up to 400 N·m and its peak torque density is greater than 200 N·m/kg and is core components of robots to fulfill the requirement of new paradigm robot situations. A highly integrated and reliable servo drive system which supports multiple communication protocols is designed. Experiments is made to verify the temperature raise characteristic and current-torque characteristic. Highly flexible and high accuracy control strategy is designed. the proposed integrated joint and drive system has been applied and verified in the humanoid robot products of multiple companies such as LEJU ROBOT, Astribot and GALAXEA AI, demonstrating excellent dynamic performance and reliability.

Key words: humanoid robots, integrated joint, embodied intelligent

中图分类号: