• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2026, Vol. 62 ›› Issue (17): 224-235.doi: 10.3901/JME.260654

• 特邀专栏:人形机器人与具身智能 • 上一篇    

扫码分享

基于串并联混合驱动架构的人形七自由度机械臂设计与解析逆运动学研究

刘辉1, 梁振杰1,2, 孙泽源1, 牛福亮1, 成静文1, 陶永3   

  1. 1. 中兵智能创新研究院有限公司 北京 100070;
    2. 浙江大学材料科学与工程学院 杭州 310027;
    3. 北京航空航天大学机械工程及自动化学院 北京 100191
  • 收稿日期:2025-12-07 修回日期:2026-06-02 发布日期:2026-11-20
  • 作者简介:刘辉,男,1993年出生,博士。主要研究方向为机电一体化控制、人形机器人与医疗机器人。E-mail:huiliuutk@gmail.com;梁振杰,男,1992年出生,硕士研究生。主要研究方向为足式仿生机器人总体、行走与驱动系统设计与控制。E-mail:liangzhenjie@openloong.net;陶永(通信作者),男,1979年出生,博士,副教授,博士研究生导师。主要研究方向为智能机器人控制与集成应用、嵌入式机电一体化控制、航空智能制造等。E-mail:taoy@buaa.edu.cn
  • 基金资助:
    科学技术部(2023YFB4704300)和国家自然科学基金(52375005)资助项目。

Design and Analytical Inverse Kinematics of a 7-DOF Humanoid Manipulator Based on a Serial-parallel Hybrid Actuation Architecture

LIU Hui1, LIANG Zhenjie1,2, SUN Zeyuan1, NIU Fuliang1, CHENG Jingwen1, TAO Yong3   

  1. 1. China North Artificial Intelligence & Innovation Research Institute, Beijing 100070;
    2. School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027;
    3. School of Mechanical Engineering and Automation, Beihang University, Beijing 100191
  • Received:2025-12-07 Revised:2026-06-02 Published:2026-11-20

摘要: 针对人形机器人上肢在运动灵活性、负载能力与结构紧凑性之间难以兼顾的问题,基于串并联混合驱动架构的七自由度机械臂设计方案。该机械臂在整体串联构型基础上,于腕部引入仿生并联驱动机构,以模拟人类腕关节多肌腱协同运动特性,在适配遥操作模仿学习方法的同时,提高末端姿态控制刚度与动态响应性能;同时在肘部关节采用偏置结构设计,在保证结构紧凑性的基础上,有效扩大机械臂工作空间并优化冗余自由度分布。基于所提出的机械臂构型,建立了完整的运动学模型,并针对七自由度冗余特性,提出一种具有明确几何意义的逆运动学求解方法,避免了传统数值迭代的低效率与不稳定性。实验与仿真结果表明,该机械臂在遥操作动作跟踪的任务中表现出良好的灵活性、稳定性与轨迹跟踪性能,所提出的逆运动学方法计算效率高、稳定性好,能够满足实时控制需求,整体结果充分验证了该设计方案与建模求解方法的有效性与工程可行性,为高集成度人形机器人上肢系统设计提供了新的技术路径。

关键词: 人形机器人, 七自由度机械臂, 串并联混合驱动, 仿生并联腕部, 逆运动学

Abstract: To address the challenge of simultaneously achieving motion flexibility, payload capacity, and structural compactness in humanoid robot upper limbs, a seven-degree-of-freedom manipulator based on a hybrid serial-parallel actuation architecture is proposed. Built upon an overall serial kinematic configuration, the robotic arm incorporates a biomimetic parallel-driven mechanism at the wrist to emulate the coordinated multi-tendon motion characteristics of the human wrist. This design not only facilitates compatibility with teleoperation-based imitation learning methods, but also improves end-effector posture stiffness and dynamic response performance. In addition, an offset elbow joint structure is adopted to effectively enlarge the workspace and optimize the distribution of redundant degrees of freedom while maintaining structural compactness. Based on the proposed manipulator configuration, a complete kinematic model is established. Furthermore, to address the redundancy characteristics of the seven-degree-of-freedom manipulator, an inverse kinematics solution method with explicit geometric interpretation is proposed, avoiding the low efficiency and instability associated with conventional numerical iterative approaches. Experimental and simulation results demonstrate that the robotic arm exhibits excellent flexibility, stability, and trajectory tracking performance in teleoperation-based motion tracking tasks. The proposed inverse kinematics method achieves high computational efficiency and strong numerical stability, satisfying the requirements of real-time control. Overall, the results fully validate the effectiveness and engineering feasibility of the proposed design and modeling approach, providing a new technical pathway for the development of highly integrated humanoid robotic upper-limb systems.

Key words: humanoid robot, seven-degree-of-freedom manipulator, serial-parallel hybrid actuation, biomimetic parallel wrist, inverse kinematics

中图分类号: