热障涂层电涡流检测新变压器模型与信号解耦方法研究

doi:10.3901/JME.2025.12.012

机械工程学报 ›› 2025, Vol. 61 ›› Issue (12): 12-25.doi: 10.3901/JME.2025.12.012

扫码分享

热障涂层电涡流检测新变压器模型与信号解耦方法研究

李超¹, 范孟豹¹, 曹丙花², 孙凤山¹, 叶波³, 严佳航²

1. 中国矿业大学机电工程学院徐州 221116;
2. 中国矿业大学信息与控制工程学院徐州 221116;
3. 昆明理工大学信息工程与自动化学院昆明 650500

收稿日期:2024-07-10 修回日期:2025-01-16 出版日期:2025-06-20 发布日期:2025-08-07
作者简介:李超，男，1993年出生，博士研究生。主要研究方向为无损检测。E-mail：zottlee@cumt.edu.cn;范孟豹(通信作者)，男，1981年出生，博士，教授，博士研究生导师。主要研究方向为涡流/太赫兹无损检测理论及应用。E-mail：wuzhi3495@cumt.edu.cn
基金资助:
国家自然科学基金(52077214，52477020)和云南省基础研究计划(202301AS070052)资助项目。

Study on Novel Transformer Model of Eddy Current Testing and Signal Decoupling of Thermal Barrier Coating

LI Chao¹, FAN Mengbao¹, CAO Binghua², SUN Fengshan¹, YE Bo³, YAN Jiahang²

1. School of Mechanical and Electrical Engineering, China University of Mining and Technology, Xuzhou 221116;
2. School of Information and Control Engineering, China University of Mining and Technology, Xuzhou 221116;
3. Faculty of Information Engineering and Automation, Kunming University of Science and Technology, Kunming 650500

Received:2024-07-10 Revised:2025-01-16 Online:2025-06-20 Published:2025-08-07

摘要/Abstract

摘要： 热障涂层由陶瓷层、黏结层和基体组成，其厚度均匀性检测是发动机叶片质量控制迫切需求的关键技术。热障涂层具有结构复杂、厚度薄、导电性差且差异小特点，导致信号弱、耦合性很强，因此涂层厚度准确检测难度极大。建立三绕组变压器模型，开展阻抗信号耦合机理及厚度测量方法研究。首先，研究黏结层和基体涡流衰减与扩散特性，引入等效涡流环并运用场路变换和能量等效确定其参数，建立三绕组变压器模型。然后，探究陶瓷层和黏结层厚度信号耦合机理，通过特征匹配、频率调控和涡流环离散分解获取陶瓷层和黏结层厚度信号特征以解耦厚度耦合信号，建立陶瓷层和黏结层厚度测量方法。最后，研制电涡流检测系统实现热障涂层陶瓷层和黏结层厚度的同时准确测量。试验结果表明陶瓷层和黏结层厚度测量相对误差分别小于5.0%和10.3%。

关键词: 热障涂层, 电涡流, 耦合机理, 新变压器模型, 厚度检测系统

Abstract: Thermal barrier coating(TBC) consists of a ceramic coating(TC), a bonding coating(BC), and a substrate. Thickness measurement of TBC plays an important and urgently needed role in quality control of engine blades. TBC has the characteristics of complicated structure, uneven thickness, low conductivity and similar electromagnetic parameters. The resultant signals are weak and strongly coupled. Therefore, it is difficult to accurately detect the coating thickness. A novel three-winding transformer model of eddy current(EC) is established, and the research is conducted on the signal coupling physics and a new method for thickness measurement. Firstly, the attenuation and diffusion characteristics of ECs in each layer of TBC are explored. The equivalent EC ring is introduced, and the parameters are determined through field-circuit transformation and energy equivalent to establish a three-winding transformer model. Secondly, the signal coupling mechanism between TC and BC is explored. The characteristic signals of the thicknesses of TC and BC, are obtained by feature matching, frequency regulation, and discrete decomposition of EC ring, to decouple the thickness signals. Finally, an EC prototype is developed to economically achieve simultaneous and accurate thickness measurements of TC and BC. The results show that the relative errors of TC and BC are less than 5% and 10.3%, respectively.

Key words: thermal barrier coating, eddy current, coupling mechanism, novel transformer model, thickness detecting system

中图分类号:

TG156

李超, 范孟豹, 曹丙花, 孙凤山, 叶波, 严佳航. 热障涂层电涡流检测新变压器模型与信号解耦方法研究[J]. 机械工程学报, 2025, 61(12): 12-25.

LI Chao, FAN Mengbao, CAO Binghua, SUN Fengshan, YE Bo, YAN Jiahang. Study on Novel Transformer Model of Eddy Current Testing and Signal Decoupling of Thermal Barrier Coating[J]. Journal of Mechanical Engineering, 2025, 61(12): 12-25.

导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks

链接本文: http://www.cjmenet.com.cn/CN/10.3901/JME.2025.12.012

http://www.cjmenet.com.cn/CN/Y2025/V61/I12/12

参考文献

[1] PADTURE N P，GELL M，JORDAN E H. Thermal barrier coatings for gas-turbine engine applications[J]. Science，2002，296(5566)：280-284.
[2] 张平，钟舜聪，张秋坤，等. 热障涂层折射率与厚度的太赫兹无损检测[J]. 机械工程学报，2021，57(20)：47-56. ZHANG Ping，ZHONG Shuncong，ZHANG Qiukun，et al. Terahertz nondestructive testing of refractive index and thickness of thermal barrier coating[J]. Journal of Mechanical Engineering，2021，57(20)：47-56.
[3] ABU-NABAH B A. Metallic coating thickness assessment over nonmagnetic metals using apparent eddy current conductivity spectroscopy[J]. International Journal of Applied Electromagnetics and Mechanics，2017，54(1)：77-91.
[4] DOU Pan，ZOU Laisheng，WU Tonghai，et al. Simultaneous measurement of thickness and sound velocity of porous coatings based on the ultrasonic complex reflection coefficient[J]. NDT & E International，2022，131：102683.
[5] CERNUSCHI F，BISON P. Thirty years of thermal barrier coatings (TBC)，photothermal and thermographic techniques：Best practices and lessons learned[J]. Journal of Thermal Spray Technology，2022，31(4)：716-744.
[6] 何存富，杨玉娥，杨申，等. 毫米波检测热障涂层缺陷的方法研究[J]. 机械工程学报，2013，49(20)：16-21. HE Cunfu，YANG Yue，YANG Shen，et al. Feasibility study on defects detection of thermal barrier coatings using millimeter wave[J]. Journal of Mechanical Engineering，2013，49(20)：16-21.
[7] 孙凤山，范孟豹，曹丙花，等. 基于时频关键信息融合的热障涂层太赫兹准确测厚方法[J]. 机械工程学报，2023，59(14)：10-22. SUN Fengshan，FAN Mengbao，CAO Binghua，et al. Terahertz based accurate thickness measurement of thermal barrier coatings using the key time-frequency information fusion[J]. Journal of Mechanical Engineering，2023，59(14)：10-22.
[8] YE Dongdong，WANG Weize，ZHOU Haiting，et al. Characterization of thermal barrier coatings microstructural features using terahertz spectroscopy[J]. Surface and Coatings Technology，2020，394：125836.
[9] 陈国龙，曹政，张帅帅，等. 基于科赫差测量平面涡流传感器的裂纹检测性能研究[J]. 机械工程学报，2023，59(10)：17-29. CHEN Guolong，CAO Zheng，ZHANG Shuaishuai，et al. Study on the crack detectability based on Koch differential pick-up planar eddy current probe[J]. Journal of Mechanical Engineering，2023，59(10)：17-29.
[10] SABBAGH H A，SABBAGH E H，MURPHY R K，et al. Assessing thermal barrier coatings by eddy current inversion[J]. Materials Evaluation，2001，59(11)：1307-1312.
[11] LI Yong，CHEN Zhenmao，MAO Ying，et al. Quantitative evaluation of thermal barrier coating based on eddy current technique[J]. NDT & E International，2012，50：29-35.
[12] 肖力伟，谢建红，宋凯，等. 基于涡流法的航空发动机关键部件热障涂层厚度测量试验研究[J]. 失效分析与预防，2020，15(2)：101-108. XIAO Liwei，XIE Jianhong，SONG Kai，et al. Experimental study on thermal barrier coating thickness measurement of key component of aero-enigine based on eddy-current method[J]. Failure Analysis and Prevention，2020，15(2)：101-108.
[13] YU Yating，ZHANG Dejun，LAI Chao，et al. Quantitative approach for thickness and conductivity measurement of monolayer coating by dual-frequency eddy current technique[J]. IEEE Transactions on Instrumentation and Measurement，2017，66(7)：1874-1882.
[14] YIN Wuliang，PEYTON A J，DICKINSON S J. Simultaneous measurement of distance and thickness of a thin metal plate with an electromagnetic sensor using a simplified model[J]. IEEE Transactions on Instrumentation and Measurement，2004，53(4)：1335-1338.
[15] WANG Hongbo，LI Wei，FENG Zhihua. Noncontact thickness measurement of metal films using eddy-current sensors immune to distance variation[J]. IEEE Transactions on Instrumentation and Measurement，2015，64(9)：2557-2564.
[16] MOTTL Z. The quantitative relations between true and standard depth of penetration for air-cored probe coils in eddy current testing[J]. NDT International，1990，23(1)：11-18.
[17] ZHANG Quan，LI Jiayi，LIAO Yanfei，et al. Characteristics of eddy current attenuation in metal clad plates and measurement of cladding thickness[J]. Research in Nondestructive Evaluation，2021，32(3-4)：177-189.
[18] LI Chao，FAN Mengbao，CAO Binghua，et al. Thickness measurement of thermal barrier coating based on mutual inductance of eddy current system[J]. IEEE Transactions on Industrial Electronics，2024，71(7)：8102-8112.
[19] LI Chao，FAN Mengbao，CAO Binghua，et al. Accurate Thickness measurement using eddy current system based on novel transformer model[J]. IEEE Transactions on Instrumentation and Measurement，2022，71：1-12.
[20] 谭祖根，陈守川. 电涡流传感器的基本原理分析与参数选择[J]. 仪器仪表学报，1980，1(1)：116-125. TAN Zugen，CHEN Shouchuan. Basic principle analysis and parameter selection of eddy current sensor[J]. Chinese Journal of Scientific Instrument，1980，1(1)：116-125.
[21] ANSARI Z A，ABU-NABAH B A，ALKHADER M，et al. Experimental evaluation of nonmagnetic metal clad thicknesses over nonmagnetic metals using apparent eddy current conductivity spectroscopy[J]. Measurement，2020，164：108053.
[22] SONG Kaihong，FENG Jian，ZHAO Ranzun，et al. A general mutual inductance formula for parallel non-coaxial circular coils[J]. Applied Computational Electromagnetics Society Journal，2019，34(9)：1385- 1390.
[23] ZHONG Guoan，KOH C K. Exact closed-form formula for partial mutual inductances of rectangular conductors[J]. IEEE Transactions on Circuits and Systems I：Fundamental Theory and Applications，2003，50(10)：1349-1352.
[24] HAMMOND P，SYKULSKI J K. Engineering electromagnetism：Physical processes and computation[M]. Oxford：Oxford University Press，1994.
[25] VYROUBAL D. Impedance of the eddy-current displacement probe：The transformer model[J]. IEEE Transactions on Instrumentation and Measurement，2004，53(2)：384-391.
[26] LI Wei，YE Yang，ZHANG Kang，et al. A thickness measurement system for metal films based on eddy-current method with phase detection[J]. IEEE Transactions on Industrial Electronics，2017，64(5)：3940-3949.
[27] WANG Cuiping，FAN Mengbao，CAO Binghua，et al. Novel noncontact eddy current measurement of electrical conductivity[J]. IEEE Sensors Journal，2018，18(22)：9352-9359.
[28] SUN Fengshan，FAN Mengbao，CAO Binghua，et al. THzResNet：A physics-inspired two-stream residual network for thermal barrier coating thickness measurement[J]. IEEE Transactions on Industrial Informatics，2022，19(7)：8328-8339.
[29] SUN Fengshan，CAO Binghua，FAN Mengbao，et al. THzMINet：A terahertz model-data-driven interpretable neural network for thickness measurement of thermal barrier coatings[J]. IEEE Transactions on Industrial Informatics，2024，20(3)：4722-4734.
[30] SUN Fengshan，FAN Mengbao，CAO Binghua，et al. Terahertz based thickness measurement of thermal barrier coatings using long short-term memory networks and local extrema[J]. IEEE Transactions on Industrial Informatics，2022，18(4)：2508-2517.
[31] SARDELLITTI A，DI CAPUA G，LARACCA M，et al. A fast ECT measurement method for the thickness of metallic plates[J]. IEEE Transactions on Instrumentation and Measurement，2022，71：1-12.
[32] QU Zilian，WANG Wensong，YANG Zhenchun，et al. High-precision thickness measurement of Cu film on Si-based wafer using erasable printed eddy current coil and high-sensitivity associated circuit techniques[J]. IEEE Transactions on Industrial Electronics，2021，69(9)：9556-9565.

热障涂层电涡流检测新变压器模型与信号解耦方法研究

Study on Novel Transformer Model of Eddy Current Testing and Signal Decoupling of Thermal Barrier Coating

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	陈政清, 杨文斌, 王辰, 张宏剑, 王文熙, 张弘毅. 高耗能密度高临界速度的电涡流阻尼新技术及其在航天工程中的应用[J]. 机械工程学报, 2026, 62(1): 79-95.
[2]	孙凤山, 范孟豹, 曹丙花, 叶波. 定制化小波基赋能的薄热障涂层太赫兹可解释测厚新方法[J]. 机械工程学报, 2025, 61(24): 12-27.
[3]	赵宇辉, 赵吉宾, 李明玥, 何振丰, 王志国, 贺晨. 激光熔化沉积TC4钛合金电涡流检测仿真及亚表面缺陷检测[J]. 机械工程学报, 2024, 60(14): 34-41.
[4]	徐亚飞, 王星雨, 钟舜聪, 张留洋, 陈雪峰. 基于稀疏表示的叶片热障涂层太赫兹检测回波信号定位分离方法[J]. 机械工程学报, 2023, 59(8): 9-19.
[5]	孙凤山, 范孟豹, 曹丙花, 刘林. 基于时频关键信息融合的热障涂层太赫兹准确测厚方法[J]. 机械工程学报, 2023, 59(14): 10-22.
[6]	李力源, 李斌, 王东升. 振动频率对电涡流阻尼非线性行为的影响[J]. 机械工程学报, 2023, 59(13): 110-123.
[7]	张平, 钟舜聪, 张秋坤, 戴晨煜, 陈伟强, 林杰文. 热障涂层折射率与厚度的太赫兹无损检测[J]. 机械工程学报, 2021, 57(20): 47-56.
[8]	严俨, 刘怡, 朱俊臻, 苗玲, 陈笑天, 周宇, 卢艳平, 高斌, 田贵云. 基于电涡流脉冲热成像偏度特征的钢轨自然裂纹量化评估[J]. 机械工程学报, 2021, 57(18): 75-85.
[9]	苗玲, 高斌, 石永生, 李浩然, 黎潇枫, 吴同乐, 张喜源, 田贵云. 基于电涡流热成像的钢轨滚动接触疲劳裂纹动态检测研究[J]. 机械工程学报, 2021, 57(18): 86-97.
[10]	王瑞雪, 叶巴丁, 孔祥号, 夏章川, 张子鹏, 李好义, 谢鹏程. 低温等离子体表面强化技术研究进展[J]. 机械工程学报, 2021, 57(12): 192-207.
[11]	李雪换, 底月兰, 王海斗, 李国禄, 董丽虹. 基于声发射技术的热障涂层拉伸失效模式研究[J]. 机械工程学报, 2020, 56(14): 57-64.
[12]	宗鸣,冯超,郑安琪. 基于FPGA自适应滤波器的磁轴承位移传感器故障信号处理分析[J]. 电气工程学报, 2018, 13(8): 1-6.
[13]	程明迪, 郭家杰, 李卓, 李国民. 基于电涡流阻尼的薄壁盘加工振动抑制[J]. 机械工程学报, 2018, 54(17): 76-84.
[14]	高宽厚, 于亚婷, 杨姣, 申鹏程. 双层导电涂层厚度的涡流无损检测方法研究[J]. 机械工程学报, 2017, 53(14): 114-119.
[15]	杨玉娥;何存富;吴斌. 同轴探头微波检测热障涂层的参数敏感性研究[J]. , 2014, 50(2): 36-41.