网状反射面天线原理误差计算方法

doi:10.3901/JME.2022.07.176

机械工程学报 ›› 2022, Vol. 58 ›› Issue (7): 176-182.doi: 10.3901/JME.2022.07.176

扫码分享

网状反射面天线原理误差计算方法

陈聪聪, 李团结, 唐雅琼

西安电子科技大学机电工程学院西安 710071

收稿日期:2021-05-07 修回日期:2021-11-22 出版日期:2022-04-05 发布日期:2022-05-20
通讯作者: 李团结(通信作者),男,1972年出生,博士,教授,博士研究生导师。主要研究领域为空间可展结构与天线、智能机器人和电子装备机电热技术。E-mail:tjli888@126.com
作者简介:陈聪聪,女,1993年出生,博士研究生。主要研究方向为空间可展结构与天线。E-mail:ccchen_1@stu.xidian.edu.cn;唐雅琼,女,1990年出生,博士,副教授,研究生导师。主要研究方向为空间可展开天线设计与分析,空间可展开结构机电热分析与控制。E-mail:yqtang@xidian.edu.cn
基金资助:
国家自然科学基金 (51775403, 51905401)和陕西省自然科学基金基础研究计划(2019JQ-505) 资助项目。

Faceting Deviation Calculation of Cable-Net Reflector Antenna

CHEN Congcong, LI Tuanjie, TANG Yaqiong

School of Mechano-Electronic Engineering, Xidian University, Xi'an 710071

Received:2021-05-07 Revised:2021-11-22 Online:2022-04-05 Published:2022-05-20

摘要/Abstract

摘要： 网状天线依靠索网系统支撑金属丝网反射面实现电磁信号的反射和接收。金属丝网反射面被索网系统分割为一系列平面面片，与理想反射面之间存在型面拟合误差即原理误差，在工程设计阶段决定了天线的电性能。针对旋转抛物反射面，采用面积坐标，推导了轴向原理误差与面片几何参数间的数学关系，给出了轴向原理误差的快速计算公式，并用数值算例验证了公式的正确性。结果表明，轴向原理误差的最大值及均方根值可由抛物面焦距及面片在天线口径面投影几何唯一确定。给定面片在口径面的投影边长，利用文中公式可快速、准确计算出面片轴向原理误差的均方根值及最大值。研究结果为合理确定网状天线网格尺寸提供指导。

关键词: 网状天线, 原理误差, 面积坐标

Abstract: The reflection and reception of electromagnetic signals of cable-net reflector antenna are realized by the wire mesh supported by the cable net system. The wire mesh is divided into a series of small facets, which makes it a faceting error between the wire mesh reflector and the ideal one, determining the electromagnetic performance in engineering design stage. The relationship between the axial faceting deviation and the facet size for the paraboloidal reflector is derived by using the area coordinate. The calculation formulas of the faceting deviation are given and verified. Results show that the maximum value and the root mean square value of the faceting deviation can be uniquely determined by the focal length of the reflector and the projection geometry of the facet on the aperture plane. Given the projection side lengths of the facet, the accurate faceting deviation results can be obtained quickly by using the derived formula. The results can provide guidance for the preliminary design of the cable net antenna.

Key words: cable net antenna, faceting error, area coordinate

中图分类号:

TH122

陈聪聪, 李团结, 唐雅琼. 网状反射面天线原理误差计算方法[J]. 机械工程学报, 2022, 58(7): 176-182.

CHEN Congcong, LI Tuanjie, TANG Yaqiong. Faceting Deviation Calculation of Cable-Net Reflector Antenna[J]. Journal of Mechanical Engineering, 2022, 58(7): 176-182.

参考文献

[1] 李团结,马小飞. 大型空间可展开天线技术研究[J]. 空间电子技术,2012,9(3):35-39. LI Tuanjie,MA Xiaofei. Technologies of large deployable space antennas[J]. Space Electronic Technology,2012, 9(3):35-39.
[2] TANG Yangqiong,LI Tuanjie,WANG Zuowei,et al. Surface accuracy analysis of large deployable antennas[J]. Acta Astronautica,2014,104(1):125-133.
[3] LAI C Y,PELLEGRINO S. Umbrella-type furlable reflector based on tension-truss concept[C]//AIAA Applied Aerodynamics Conference. 2013.
[4] TIBERT G. Deployable tensegrity structures for space applications[D]. Stockholm:Royal Institute of Technology,2002.
[5] MEGURO A,SHINTATE K,USUI M,et al. In-orbit deployment characteristics of large deployable antenna reflector onboard Engineering Test Satellite VIII[J]. Acta Astronautica,2009,65(9):1306-1316.
[6] BAARS J W M. The paraboloidal reflector antenna in radio astronomy and communication:theory and practice[M]. New York:Springer,2007.
[7] TANG Yangqiong,LI Tuanjie,MA Xiaofei. Form-finding of cable net reflector antennas considering creep and recovery behaviors[J]. Journal of Spacecraft and Rockets,2016,53(4):610-618.
[8] 陈聪聪,李团结,马小飞. 空间可展开结构静力多稳态分析[J]. 机械工程学报,2020,56(5):72-79. CHEN Congcong,LI Tuanjie,MA Xiaofei. Static multiple-stable-state analysis of deployable structures with clearance joints[J]. Journal of Mechanical Engineering,2020,56(5):72-79.
[9] RUZE J. Antenna tolerance theory-A review[J]. Proc IEEE,1966,54(4):633-640.
[10] RUZE J. The effect of aperture errors on the antenna radiation pattern[J]. Il Nuovo Cimento (1943-1954),1952,9(3):364-380.
[11] RAHMAT-SAMII Y. An efficient computational method for characterizing the effects of random surface errors on the average power pattern of reflectors[J]. IEEE Transactions on Antennas & Propagation,1983,31(1):92-98.
[12] CHEN Congcong,LI Tuanjie,TANG Yangqiong. Mesh generation of elliptical aperture reflectors[J]. Journal of Aerospace Engineering,2019,32(4):04019025.
[13] AGRAWAL P,ANDERSON M,CARD M. Preliminary design of large reflectors with flat facets[J]. Antennas & Propagation IEEE Transactions on,1981,29(4):688-694.
[14] HEDGEPETH J M. Accuracy potentials for large space antenna reflectors with passive structure[J]. Journal of Spacecraft and Rockets,1982,19(3):211-211.
[15] 杨东武,尤国强,保宏. 抛物面索网天线的最佳型面设计方法[J]. 机械工程学报,2011,47(19):123-128. YANG Dongwu,YOU Guoqiang,BAO Hong. Best geometry design method for paraboloid reflectors of mesh antenna[J]. Journal of Mechanical Engineering,2011, 47(19):123-128.
[16] 钟顺时. 天线理论与技术[M]. 北京:电子工业出版社,2015. ZHONG Shunshi. Antenna theory and techniques[M]. Beijing:Publishing House of Electronics Industry,2015.
[17] MERTIE J B. Transformation of trilinear and quadriplanar coordinates to and from Cartesian coordinates[J]. The American Mineralogist,1964,49(7/8):926-936.

网状反射面天线原理误差计算方法

Faceting Deviation Calculation of Cable-Net Reflector Antenna

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

编辑推荐

Metrics

本文评价

[1]	李欢笑, 马小飞, 范叶森. 三层赋形网状天线预张力设计方法[J]. 机械工程学报, 2020, 56(9): 29-35.
[2]	张博宇, 陈章华. 基于应变梯度理论和面积坐标有限元的管线钢微观组织尺寸效应研究[J]. 机械工程学报, 2017, 53(2): 74-83.
[3]	朱亚群;林忠钦;倪军;徐伟力;张卫刚;李淑慧. 薄板成形动力显式有限元算法与面积坐标四边形单元模型[J]. , 2002, 38(4): 78-83.