风力机叶片铺层参数多目标优化设计

doi:10.3901/JME.2022.04.165

机械工程学报 ›› 2022, Vol. 58 ›› Issue (4): 165-173.doi: 10.3901/JME.2022.04.165

• 可再生能源与工程热物理 • 上一篇下一篇

扫码分享

风力机叶片铺层参数多目标优化设计

董新洪¹, 孙鹏文¹, 张兰挺¹, 王宗涛^1,2

1. 内蒙古工业大学机械工程学院呼和浩特 010051;
2. 北汽福田汽车股份有限公司研究院北京 102206

收稿日期:2021-05-02 修回日期:2021-08-02 出版日期:2022-02-20 发布日期:2022-04-30
通讯作者: 孙鹏文(通信作者),男,1966年出生,博士,教授,博士研究生导师。主要研究方向为机电装备设计与制造,风力机叶片结构设计与优化。E-mail:pwsun@imut.edu.cn
作者简介:董新洪,男,1996年出生。主要研究方向为结构设计与优化。E-mail:1664546141@qq.com
基金资助:
国家自然科学基金(51865041,52165035)和内蒙古自然科学基金(2019MS05070)资助项目。

Multi-objective Optimization of Ply Parameters for Wind Turbine Blade

DONG Xinhong¹, SUN Pengwen¹, ZHANG Lanting¹, WANG Zongtao^1,2

1. School of Mechanical Engineering, Inner Mongolia University of Technology, Hohhot 010051;
2. Research Institute, Beiqi Foton Motor Co., Ltd., Beijing 102206

Received:2021-05-02 Revised:2021-08-02 Online:2022-02-20 Published:2022-04-30

摘要/Abstract

摘要： 叶片铺层设计为一个多参数、多目标的复杂耦合作用过程，其性能主要取决于铺层参数。通过推导正轴刚度不变量和弯扭刚度矩阵间的关系，构建层合板刚度等效模型与铺层顺序表征参数之间的数学关系，实现铺层顺序的量化；应用均匀试验设计、有限元分析和和多元非线性回归法，构建铺层参数和叶片性能间的耦合数学模型，分析单参数和两两参数对叶片刚强度的影响；为实现叶片刚强度的多目标优化，应用层次分析法计算各目标函数权重，建立叶片多目标优化数学模型；基于模拟退火算法进行求解，得到叶片综合性能最优的铺层参数组合为铺层角度45°、±x°铺层厚度比例为58%、铺层顺序为[±x°/0°/90°/±x°]TN。结果表明优化后叶片的最大位移和Tsai-wu失效因子分别降低了2.79%和5.87%，性能得以提高，验证所提出多目标优化方法的有效性和可行性。

关键词: 多目标优化, 铺层参数, 离散变量量化, 数学模型, 风力机叶片

Abstract: The design of blade layer is a complex coupling process of multi-parameter and multi-object, and the performance of the blade mainly depends on the ply parameters. Through deducing the relationship between stiffness invariants of positive axis and bending-torsion stiffness matrix, establishing the mathematical relationship between equivalent stiffness model of laminate and the ply stacking sequence, the quantification of ply stacking sequence is realized. The nonlinear coupling mathematical model between ply parameters and blade properties is constructed by a combination of uniform test design method, numerical simulation and regression analysis. The effects of single parameter and pairwise interactions of ply parameters on blade’ stiffness and strength are analyzed. To achieve multi-objective optimization of blade strengthand stiffness, the analytic hierarchy method is used to calculatethe weight of every single-objective function, and the multi-objective optimization mathematical model of blade is established. The ply parameters of the optimal blade comprehensive performance is obtained based on simulated annealing algorithm, which is 45° of ply angle, 58% of ±x° ply thickness ratio and [±x°/0°/90°/±x°]TN of ply stacking sequence. The results show that the maximum displacement and Tsai-wu failure factor of the optimized blade are reduced by 2.79% and 5.87%, respectively, and the properties of blade are improved. The effectiveness and correctness of the proposedoptimization method of multi-parameter and multi-object is verified.

Key words: multi-objective optimization, ply parameter, quantification of ply stacking sequence, mathematical model, wind turbine blade

中图分类号:

TH16

董新洪, 孙鹏文, 张兰挺, 王宗涛. 风力机叶片铺层参数多目标优化设计[J]. 机械工程学报, 2022, 58(4): 165-173.

DONG Xinhong, SUN Pengwen, ZHANG Lanting, WANG Zongtao. Multi-objective Optimization of Ply Parameters for Wind Turbine Blade[J]. Journal of Mechanical Engineering, 2022, 58(4): 165-173.

参考文献

[1] 赵清鑫,张兰挺.基于径向基神经网络的风力机叶片铺层优化[J].太阳能学报,2020,41(4):229-234.ZHAO Qingxin,ZHANG Lanting. Ply parameter optimization of wind turbine blade based on radial basis function netural network[J]. Acta Energiae Solaris Sinica,2020,41(4):229-234.
[2] 冯消冰,黄海,王伟.基于遗传算法的大型风机复合材料叶片根部强度优化设计[J].复合材料学报,2012,29(5):196-202.FENG Xiaobing,HUANG Hai,WANG Wei. Strength optimization of large wind turbine blade root on the genetic algorithm[J]. Acta Materiae Compositae Sinica,2012,29(5):196-202.
[3] 周邢银,安利强,王璋奇.考虑翘曲效应的风力机叶片弯扭耦合特性计算方法[J].可再生能源,2015,33(2):238-243.ZHOU Xingyin,AN Liqiang,WANG Zhangqi. Bend-twist coupling characteristics calculation method ofcomposite wind turbine blades considering warping effect[J]. Renewable Energy Resources,2015,33(2):238-243.
[4] CHEHOURI A,YOUNES R,ILINCA A,et al. Optimal design for a composite wind turbine blade with fatigue and failure constraint[J]. Transactions-Canadian Society for Mechanical Engineering,2015,39(2):171-186.
[5] ALBANESI A,BRE F,FACHINOTTI V,et al. Simultaneous ply-order,ply-number and ply-drop optimization of laminate wind turbine blades using the inverse finite element method[J]. Composite Structures,2018,184(1):894-903.
[6] LUND E. Discrete material and thickness optimization of laminated composite structures including failure criteria[J]. Structural and Multidisciplinary Optimization,2017,56(12):1-19
[7] YANG Rui,QUAN Pei. Effect of main spar ply parameters on performance of composite wind turbine blades[J]. Journal of Physics:Conference Series,2018,17(1):235-246.
[8] 杨阳,李春,缪维跑,等.基于多目标遗传算法的风力机叶片全局优化设计[J].机械工程学报,2015,51(14):192-198.YANG Yang,LI Chun,MIAO Weipao,et al. Global optimal design of wind turbines blade based on multi-object genetic algorithm[J]. Journal of Mechanical Engineering,2015,51(14):192-198.
[9] POSTELJNIK Z. Multi-objective design optimization strategies for small-scale vertical-axis wind turbines[J]. Structural and Multidisciplinary Optimization,2016,53(2):277-290.
[10] 郭小锋,郭士锐,杨树峰,等.风力机预弯叶片多目标优化设计[J].可再生能源,2017,35(6):875-883.GUO Xiaofeng,GUO Shirui,YANG Shufeng,et al. Multi-objective optimization design of the pre-bendingwind turbine blades[J]. Renewable Energy Resources,2017,35(6):875-883.
[11] ZHU Jie,CAI Xin,PAN Pan,et al. Multi-objective structural optimization design of horizontal-axis wind turbine blades using the non-dominated sorting genetic algorithm and finite element method[J]. Energies,2014,7(2):988-1002.
[12] VIANNA N,JULIO X,GUERRA J,et al. Wind turbine blade geometry design based on multi-objective optimization using metaheuristics[J]. Energy,2018,162(11):645-658.
[13] 张兰挺,李双荣,孙鹏文,等.铺层参数对风力机叶片结构性能的耦合影响分析[J].太阳能学报,2018,39(6):1768-1774.ZHANG Lanting,LI Shuangrong,SUN Pengwen et al. Coupling effects analysis of laminating parameters to structural properties of wind turbine blade[J]. Acta Energiae Solaris Sinica,2018,39(6):1768-1774.
[14] LUCAS S,MARTIN O,JOHN E Q. Wind turbine rotor modeling using response surface methodology[C]//Institute of Electrical and Electronics Engineers Inc.201023rd Canadian Conference on Electrical and Computer Engineering,2010,Memorial University of Newfoundland,St. John's,NL,A1B 3X5,Canada:IEEE,2010:1-5.
[15] 何旋,金海波.基于稳定性的复合材料层合板铺层顺序优化[J].科技创新导报,2014(3):75-76.HE Xuan,JIN Haibo. Optimization of stacking sequence of composite laminate based on stability[J]. Science and Technology Innovation Herald,2014(3):75-76.
[16] 王宗涛.铺层参数对风力机叶片性能的耦合影响分析与优化[D].呼和浩特:内蒙古工业大学,2019.WANG Zongtao. Analysis and optimization of coupling effects of ply parameters on wind turbine blade performance[D]. Hohhot:Inner Mongolia University of Technology,2019.
[17] ZGHAL J,AMMAR A,CHINESTA F,et al. High-resolution elastic analysis of thin-ply composite laminates[J]. Composite Structures,2017,172(7):15-21.
[18] 徐向宏,何明珠.试验设计与Design-Expert、SPSS应用[M].北京:科学出版社,2014.XU Xianghong,HE Mingzhu. Experiment design&application of design-expert and SPSS[M]. Beijing:Science Press,2014.
[19] 张根保,徐付伟,冉琰,等.机械结构相似度评价及可靠性预计研究[J].工程设计学报,2017,24(3):264-272.ZHANG Genbao,XU Fuwei,RAN Yan,et al. Research on similarity evaluation and reliability prediction of mechanical structure[J]. Chinese Journal of Engineering Design,2017,24(3):264-272.
[20] 李瑰,张保成,马学军.基于层次分析法的齿轮减速器多目标优化设计[J].煤矿机械,2015,36(5):32-35.LI Gui,ZHANG Baocheng,MA Xuejun. Multi-objective optimization design for gear reducer based on analytic hierarchy process[J]. Coal Mine Machinery,2015,36(5):32-35.
[21] LIANG Wei,ZHUO Weidong. Reliability analysis of bridge structure based on improved simulated annealing algorithm[J]. International Journal of Earth Sciences and Engineering,2015,8(1):261-265.

风力机叶片铺层参数多目标优化设计

Multi-objective Optimization of Ply Parameters for Wind Turbine Blade

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	周晨, 徐飞翔. 四轮独立转向车辆转向模式切换轨迹多目标优化方法研究[J]. 机械工程学报, 2024, 60(6): 306-320.
[2]	柴依扬, 张乐乐, 窦伟元, 张海峰. 基于并行NSGA-III算法的高速列车车体侧墙结构高维多目标优化[J]. 机械工程学报, 2024, 60(6): 321-333.
[3]	苏建涛, 董绍华, 朱诗敏. 多目标混合流水车间机器故障重调度问题研究[J]. 机械工程学报, 2024, 60(4): 438-448.
[4]	唐红涛, 魏书鹏, 李西兴, 雷德明, 汪开普. 考虑排队因素的多车型车辆配置与路径协同优化[J]. 机械工程学报, 2024, 60(4): 458-472.
[5]	李守忠, 管昀毅, 马冲, 赵剑龙, 赵宏哲. 上肢康复机器人被动变刚度驱动器建模与试验[J]. 机械工程学报, 2024, 60(3): 47-54.
[6]	吕利叶, 鲁玉军, 王硕, 刘印, 李昆鹏, 宋学官. 代理模型技术及其应用：现状与展望[J]. 机械工程学报, 2024, 60(3): 254-281.
[7]	唐新姿, 李可翔, 何文双, 陈睿, 彭锐涛. 多工况风电叶片颤振相关性分析与气弹优化[J]. 机械工程学报, 2024, 60(20): 300-314.
[8]	王旭, 姜兴宇, 杨国哲, 孙猛, 于沈弘, 毕凯航, 赵日铮, 刘伟军. 基于PSO-SSA的激光清洗装备人机界面布局优化研究[J]. 机械工程学报, 2024, 60(20): 372-387.
[9]	熊瑞, 李正阳, 燕润博, 杨瑞鑫. 全气候自热锂离子电池及低温极速加热策略研究[J]. 机械工程学报, 2024, 60(18): 247-257.
[10]	梁旭, 张建勇, 李国涛, 苏婷婷, 何广平, 侯增广. 面向骨折复位手术的冗余并联机构：设计、建模与性能分析[J]. 机械工程学报, 2024, 60(17): 133-146.
[11]	王洪亮, 雍健羽, 皮大伟, 谢伯元, 王尔烈, 王显会. 基于贝塞尔曲线和多目标优化方法的多车队形切换轨迹规划[J]. 机械工程学报, 2024, 60(16): 270-279.
[12]	赵峰, 胡伟飞, 李光, 邓晓豫, 刘振宇, 郭云飞, 谭建荣. 基于混合指标自适应采样代理模型的多目标优化设计方法[J]. 机械工程学报, 2024, 60(13): 81-91.
[13]	王娟, 刘美红, 祝世兴, 陈文博, 李遇贤, 孙军锋. 指尖密封结构参数的多目标混合教与学优化方法[J]. 机械工程学报, 2023, 59(9): 157-170.
[14]	张新彤, 张成明, 李立毅, 傅鹏睿. 电推进用高效轻质永磁同步电机的设计方法[J]. 机械工程学报, 2023, 59(8): 181-195.
[15]	刘伟军, 索英祁, 姜兴宇, 田志强, 张栋, 杨国哲, 王弘玥, 韩清冰. 激光清洗过程低碳建模与工艺参数优化[J]. 机械工程学报, 2023, 59(7): 276-294.