双叶片套型电解加工流场设计及优化

doi:10.3901/JME.2022.21.306

机械工程学报 ›› 2022, Vol. 58 ›› Issue (21): 306-315.doi: 10.3901/JME.2022.21.306

扫码分享

双叶片套型电解加工流场设计及优化

张晓博, 朱栋, 李正寅, 焦尔豪, 侯镇浩

南京航空航天大学机电学院南京 210016

收稿日期:2021-11-17 修回日期:2022-06-18 出版日期:2022-11-05 发布日期:2022-12-23
通讯作者: 朱栋(通信作者),男,1982年出生,博士,教授,博士研究生导师。主要研究方向为特种加工,电化学加工。E-mail:zhudong@nuaa.edu.cn
作者简介:张晓博,男,1996年出生。主要研究方向为电化学加工。E-mail:xiao7590@163.com;李正寅,男,1998年出生,硕士研究生。主要研究方向为电化学加工。;焦尔豪,男,1998年出生,硕士研究生。主要研究方向为电化学加工。;侯镇浩,男,1998年出生,硕士研究生。主要研究方向为电化学加工。
基金资助:
国家自然科学基金重大研究计划培育（91860135）、国家科技重大专项（2017-VII-0004-0097）和中央高校基本科研业务费专项资金（NE2017003）资助项目。

Design and Optimization of Flow Field in Electrochemical Trepanning for Double Blades

ZHANG Xiaobo, ZHU Dong, LI Zhengyin, JIAO Erhao, HOU Zhenhao

College of Mechanical and Electronic Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016

Received:2021-11-17 Revised:2022-06-18 Online:2022-11-05 Published:2022-12-23

摘要/Abstract

摘要： 具有大小双叶片的扩压器能够改善压气机的性能，在航空发动机中得到广泛应用。此类构件多采用高温合金等难切削材料制造，传统铣削加工存在刀具损耗等问题。电解加工技术具有无机械切削力、工具阴极无损耗等特点。提出一种双叶片套型电解加工的方法，基于法向流程等距的原则设计了叶间出液通道，建立了出液通道宽度递增的流道模型，开展了流场仿真研究，当出液通道的宽度为0.9 mm时，加工区域内电解液的流速分布最均匀。选择GH4169材料进行了双叶片套型电解加工的对比试验，试验结果表明，采用叶间出液的电解液流动方式，加工稳定性得到提高，阴极进给速度由0.6 mm/min提高至1.0 mm/min，材料去除速率达到1 396.5 mm³/min，叶片锥度降低至1：14.29以下，轮毂表面形貌得到改善。

关键词: 扩压器, 套型电解加工, 电解液流动方式, 流场仿真, 材料去除速率

Abstract: Diffuser with double blades (main blade and splitter blade) can further optimize the performance of compressor and is widely used in air engines. For these components made by difficult-cutting materials, traditional milling is easy to cause the loss of tools. Electrochemical machining technology (ECM) has the characteristics of no mechanical cutting force and wide machining range. A method of electrochemical trepanning for double blades is proposed. The liquid outlet channel (LOC) between blades is design based on the equal-distance of flow path. The 3D flow channel models with increasing width of LOC are established and CFD simulations are carried out. When the width is 0.9 mm, the electrolyte in the machining area has the most uniform flow rate. The results of comparative experiments with GH4169 material showed that the cathode feed rate is increased from 0.5 mm/min to 1 mm/min, and the material removal rate reached 1 396.5 mm³/min. The surface morphology of the hub is improved and the blade taper was reduced to less than 1:14.29.

Key words: diffuser, electrochemical trepanning, flow mode of electrolyte, flow field simulation, material removal rate

中图分类号:

张晓博, 朱栋, 李正寅, 焦尔豪, 侯镇浩. 双叶片套型电解加工流场设计及优化[J]. 机械工程学报, 2022, 58(21): 306-315.

ZHANG Xiaobo, ZHU Dong, LI Zhengyin, JIAO Erhao, HOU Zhenhao. Design and Optimization of Flow Field in Electrochemical Trepanning for Double Blades[J]. Journal of Mechanical Engineering, 2022, 58(21): 306-315.

参考文献

[1] 康达, 何卫东, 徐毅. 分流叶片长度和周向位置对高压比离心压气机性能的影响[J]. 推进技术, 2020, 41(12):2709-2719. KANG Da, HE Weidong, XU Yi. Effects of splitter blade length and circumferential position on performance of high pressure ratio centrifugal compressor[J]. Journal of Propulsion Technology, 2020, 41(12):2079-2719.
[2] 张梅, 席光, 唐永洪. 离心压气机楔形扩压器设计及改进方法研究[J]. 工程热物理学报, 2020, 41(3):601-608. ZHANG Mei, XI Guang, TANG Yonghong. Study on design and improvement of wedge vane diffuser for centrifugal compressor[J]. Journal of Engin-eering Thermophysics, 2020, 41(3):601-608.
[3] 黄明涛, 傅军英, 刘萌. 航空发动机整流器精密振动电解加工技术研究[J]. 航空制造技术, 2021, 64(9):32-38, 59. HUANG Mingtao, FU Junying, LIU Meng. Research on aero-engine rectifier with precision electrochemical machining process[J]. Aeronautical Manufacturing Technology, 2021, 64(9):32-38, 59.
[4] KLOCKE F, KLINK A. Turbomachinery com-ponent manufacture by application of electrochemical, electro-physical and photonic processes[J]. CIRP Annals, 2014, 63(2):703-726.
[5] 刘强, 徐正扬. 航天发动机叶片电解加工流场设计和试验研究[J]. 机械制造与自动化, 2020, 49(2):54-59. LIU Qiang, XU Zhengyang. Design and experimental study of flow field of precision electrochemical machining of blade diffuser[J]. Machine building & Automation, 2020, 49(2):54-59.
[6] KLINK A. Study of electrolyte flow at narrow openings during electrochemical machining[J]. CIRP Annals-Manufacturing Technology, 2020, 69:157-160.
[7] SHIMASAKI T, KUNIEDA M. Study on inf-luences of bubbles on ECM gap phenomena using transparent electrode[J]. CIRP Annals, 2016, 65:225-228.
[8] ZHU Dong, XUE Tingyu, HU Xingyan. Electrochemical trepanning with uniform electrolyte flow around the entire blade profile[J]. Chinese Journal of Aeronautics, 2019, 32(7):1748-1755.
[9] XU Juewu, ZHU Dong. Flow field design and experimental investigation of electrochemical trepanning of diffuser with a special structure[J]. Int J Adv Manuf Technol, 2020, 107:1551-1558.
[10] LIU Yan, QU Ningsong. Improvements to machining surface quality by controlling the flow direction of electrolyte during electrochemical sinking and milling of titanium alloy[J]. Science China, 2020, 63(12):2698-2708.
[11] HU Xingyan, ZHU Dong, LI Jiabao. Flow field research on electrochemical machining with gas film insulation[J]. Journal of Materials Processing Technology, 2019, 267:247-256.
[12] TANG L, ZHU LQ, ZHAO JS. Research on the cathode design and experiments of ele-ctrochemical machining a closed impeller internal flow channel[J]. Int. J. Adv. Manuf. Technol., 2017, 88:2517-2525.
[13] WANG Xindi, QU Ningsong, FANG Xiaolong. Electrochemical drilling with constant electrolyte flow[J]. Journal of Materials Processing Technology, 2016, 238:1-7.
[14] WANG Kun, SHEN Qi. Localized electrochemical deburring of cross hole using gelatinous electrolyte[J]. Materials and Manufacturing Processes, 2016, 31:1749-1754.
[15] PAUL R, MEICHSNER G. Study on the dynamic generation of the jet shape in jet electrochemical machining[J]. Journal of Materials Processing Technology, 2015, 223:240-251.
[16] PATEL DS, SHARMA V. Sustainable electrochemical micromachining using atomized electrolyte flushing[J]. Journal of The Ele-ctrochemical Society, 2021, 168.
[17] LIN Jiahao, ZHU Dong. Flow field design and ex-perimental investigation of the electrochemical trepanning of a diffuser with a liquid-increasing seam[J]. Int J Adv Manuf Technol, 2021, 112:2533-2545.
[18] LGNAT L, PELLETIER D. A universal formulation of two-equation models for adaptive computation of turbulent flows[J]. Computer Methods In Applied Mechanics And Engineering, 2000, 189(4):1119-1139.
[19] 张凯, 王利英, 张晓华. 不同湍流模型在水泵水轮机内的适用性比较[J]. 水力发电, 2021, 47(4):94-96, 101. ZHANG Kai, WANG Liying, ZHANG Xiaohua. Applicability comparison of different turbulence models in pump-turbines[J]. Water Power, 2021, 47(4):94-96, 101.
[20] RATHOD V, DOLOI B. Sidewall insulation of microtool for electrochemical micromachining to enhance the machining accuracy[J]. Materials and Manufacturing Processes, 2014, 29:305-313.
[21] 王登勇, 朱荻, 朱增伟. 复杂型面薄壁回转体零件旋印电解加工基础研究[J]. 机械工程学报, 2019, 55(7):162. WANG Dengyong, ZHU Di, ZHU Zengwei. Research on rotary printing electrochemical machining of thin-walled rotating parts with complex profile[J]. Journal of Mechanical Engineering, 2019, 55(7):162.
[22] ZHU Dong, HU Xingyan, LIN Jiahao. Investigation into the blade-formation process in electrochemical trepanning of diffusers[J]. Machining Science and Technology, 2020, 24(3):489-507.

双叶片套型电解加工流场设计及优化

Design and Optimization of Flow Field in Electrochemical Trepanning for Double Blades

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 14

编辑推荐

Metrics

本文评价

[1]	刘银水, 丁爽爽, 马玉山, 吴新宇, 韩明兴, 崔岩. 蚁穴式节流元件控压机理和空化特性研究[J]. 机械工程学报, 2024, 60(16): 348-356.
[2]	刘城, 闫清东, 李娟, 李晋, 邹波. 高功率密度液力变矩器空化特性研究[J]. 机械工程学报, 2020, 56(24): 147-155.
[3]	冀宏;张继铭;王金林;任威;孙东宁;王文璐. 液压电机泵中孔板离心泵的增压效应[J]. , 2014, 50(10): 177-182.
[4]	庞佑霞;唐勇;梁亮;朱宗铭;许焰;刘厚才;李彬. 冲蚀与空蚀交互磨损三相流场仿真与试验研究[J]. , 2012, 48(3): 115-120.
[5]	傅新;王驰宇;谢海波;杨华勇. 射流流量计的仿真与试验研究[J]. , 2006, 42(7): 24-29.
[6]	谢海波;傅新;杨华勇;陈虹. 典型微管道流场数值模拟与Micro-PIV检测研究[J]. , 2006, 42(5): 32-38.
[7]	杨策;闫兆梅;张广;马朝臣. 带楔形扩压器的跨声速离心压气机设计及内部流场计算[J]. , 2006, 42(2): 71-75.
[8]	冀宏;傅新;杨华勇;王庆丰. 非全周开口滑阀压力分布测量研究[J]. , 2004, 40(4): 99-102.
[9]	冀宏;傅新;杨华勇. 非全周开口滑阀稳态液动力研究[J]. , 2003, 39(6): 13-17.
[10]	高红;傅新;杨华勇;築地徹浩. 锥阀阀口气穴流场的数值模拟与试验研究[J]. , 2002, 38(8): 27-30.
[11]	谢海波;傅新;杨华勇. 微型无阀泵流动特征仿真与试验研究[J]. , 2002, 38(7): 54-57.
[12]	张莉;陈汉平;王启杰. 离心叶轮机械有叶扩压器内部流动的PIV测量[J]. , 2002, 38(5): 105-108.
[13]	王彤;谷传纲. 设计工况下离心压气机内部动静部件耦合非定常流动的数值模拟[J]. , 2001, 37(3): 20-24，2.
[14]	谷传纲;吉永明. 二维扩压器最优型线的理论研究和设计方法[J]. , 1990, 26(2): 79-84.