再制造服务的广义内涵、研究现状与发展趋势

doi:10.3901/JME.2021.07.138

机械工程学报 ›› 2021, Vol. 57 ›› Issue (7): 138-153.doi: 10.3901/JME.2021.07.138

扫码分享

再制造服务的广义内涵、研究现状与发展趋势

王蕾, 郭钰瑶, 张泽琳, 夏绪辉

武汉科技大学冶金装备及其控制教育部重点实验室武汉 430081

收稿日期:2020-04-01 修回日期:2020-11-03 出版日期:2021-04-05 发布日期:2021-05-25
通讯作者: 张泽琳(通信作者),男,1988年出生,博士,副教授,硕士研究生导师。主要研究方向为制造系统工程、绿色制造技术及装备、智能选矿技术及装备。E-mail:zhangzelin@wust.edu.cn
作者简介:王蕾，女，1987年出生，博士，副教授，硕士研究生导师。主要研究方向为制造系统工程、再制造服务、逆向供应链服务。E-mail：candywang@wust.edu.cn;郭钰瑶，女，1996年出生，硕士研究生。主要研究方向为再制造服务。E-mail：Joey_Guo423@163.com;夏绪辉，男，1966年出生，博士，教授，博士研究生导师。主要研究方向为制造系统工程、逆向供应链管理、再制造服务。E-mail：xiaxuhui@wust.edu.cn
基金资助:
国家自然科学基金(51805385)和襄阳市重大科技计划(2020AAT001420)资助项目。

Extensive Concept, State-of-the Art Developing Trends of Remanufacturing Service

WANG Lei, GUO Yuyao, ZHANG Zelin, XIA Xuhui

Key Laboratory of Metallurgical Equipment and Control Technology of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081

Received:2020-04-01 Revised:2020-11-03 Online:2021-04-05 Published:2021-05-25

摘要/Abstract

摘要： 再制造服务是再制造与服务相融合的绿色循环产业形态。阐述了再制造服务的广义内涵，主要包括再制造服务的基本概念、再制造服务过程、再制造服务相关关联关系、再制造服务广义产品以及再制造服务价值链等。在此基础上，分析再制造及其服务、再制造服务需求发现与获取、再制造回收服务、再制造拆卸服务、再制造加工服务、再制造集成等相关研究应用现状。最后论述了再制造服务的发展趋势。

关键词: 再制造服务, 内涵, 研究现状, 发展

Abstract: Remanufacturing service is a green circular industry form integrated by remanufacturing and service. The broad meaning of remanufacturing service is expounded, including the basic concept of remanufacturing service, remanufacturing service process, remanufacturing service correlation, remanufacturing service generalized product and remanufacturing service value chain. On this basis, the research and application status of remanufacturing and its service, remanufacturing service demand discovery and acquisition, remanufacturing recovery service, remanufacturing disassembly service, remanufacturing processing service and remanufacturing integration are analyzed. And, the development trend of remanufacturing service is discussed.

Key words: remanufacturing services, concept, state-of-the research, developing

中图分类号:

TG156

王蕾, 郭钰瑶, 张泽琳, 夏绪辉. 再制造服务的广义内涵、研究现状与发展趋势[J]. 机械工程学报, 2021, 57(7): 138-153.

WANG Lei, GUO Yuyao, ZHANG Zelin, XIA Xuhui. Extensive Concept, State-of-the Art Developing Trends of Remanufacturing Service[J]. Journal of Mechanical Engineering, 2021, 57(7): 138-153.

参考文献

[1] 工信部节能与综合利用司. 关于《高端智能再制造行动计划(2018-2020年)》的解读[J]. 表面工程与再制造,2017,17(6):20-22. Department of energy conservation and comprehensive utilization,ministry of industry and information technology. Interpretation of high-end intelligent remanufacturing action plan (2018-2020)[J]. Information of Surface Engineering,2017,17(6):20-22.
[2] 郑汉东,陈意,李恩重,等. 再制造产品服务系统生命周期评价建模及应用[J]. 中国机械工程,2018,29(18):2197-2203. ZHENG Handong,CHEN Yi,LI Enzhong,et al. LCA modeling and applications for RPSS[J]. China Mechanical Engineering,2018,29(18):2197-2203.
[3] 刘宇熹,谢家平,葛夫财. 再制造下基于努力程度的产品租赁服务系统收益共享契约研究[J]. 管理工程学报,2018,32(1):33-40. LIU Yuxi,XIE Jiaping,GE Fucai. Effort-driven and revenue sharing contracts for leased product service system based on remanufacturing[J]. Journal of Industrial Engineering and Engineering Management,2018,32(1):33-40.
[4] CHEN J,VENKATADRI U,DIALLO C. Optimal (re)manufacturing strategies in the presence of spontaneous consumer returns[J]. Journal of Cleaner Production,2019,237.
[5] 周维浪,韩小花,沈莹. 考虑消费者行为的闭环供应链定价和服务水平决策及协调[J]. 计算机集成制造系统,2017,23(10):2241-2250. ZHOU Weilang,HAN Xiaohua,SHEN Ying. Price and service level decisions and coordination of closed-loop supply chain considering consumer behavior[J]. Computer Integrated Manufacturing Systems,2017,23(10):2241-2250.
[6] TEIXEIRA E L S,TJAHJONO B,ALFARO C A,et al. Extending the decision-making capabilities in remanufacturing service contracts by using symbiotic simulation[J]. Computers in Industry,2019,111:26-40.
[7] 王蕾,夏绪辉,熊颖清,等. 再制造服务资源模块化方法及应用[J]. 计算机集成制造系统,2016,22(9):2204-2216. WANG Lei,XIA Xuhui,XIONG Yingqing,et al. Modular method of remanufacturing service resources[J]. Computer Integrated Manufacturing Systems,2016,22(9):2204-2216.
[8] 王蕾,夏绪辉,曹建华,等. 再制造服务需求动态获取方法及应用[J]. 计算机集成制造系统,2018,24(3):781-792. WANG Lei,XIA Xuhui,CAO Jianhua,et al. Dynamic requirements acquisition method and application for remanufacturing service[J]. Computer integrated manufacturing systems,2018,24(3):781-792.
[9] 孙林岩,李刚,江志斌,等. 21世纪的先进制造模式-服务型制造[J].中国机械工程,2007,18(19):2307-2312. Sun Linyan,LI Gang,JIANG Zhibin,et al. Service-embedded manufacturing:advanced manufacturing paradigm in 21st century[J]. China Mechanical Engineering,2007,18(19):2307-2312.
[10] GIUTINI R,GAUDETTE K. Remanufacturing:the next great opportunity for boosting US productivity[J]. Business Horizons,2003,46(6):41-48.
[11] AGUIAR J D,OLIVEIRA L D,SILVA J O D,et al. A design tool to diagnose product recyclability during product design phase[J]. Journal of Cleaner Production,2017,141:219-229.
[12] 王金龙,张元良,赵清晨,等. 再制造毛坯疲劳损伤临界阈值及可再制造性判断研究[J]. 机械工程学报,2017,3(5):41-49. WANG Jinlong,ZHANG Yuanliang,ZHAO Qingchen,et al. Study of fatigue defect critical threshold of remanufacturing cores and judgment of remanufactur- ability based on fatigue defect[J]. Journal of Mechanical Engineering,2017,53(5):41-49.
[13] GOODALL P,ROSAMOND E,HARDING J. A review of the state of the art in tools and techniques used to evaluate remanufacturing feasibility[J]. Journal of Cleaner Production,2014,81(7):1-15.
[14] HE Y. Acquisition pricing and remanufacturing decisions in a closed-loop supply chain[J]. International Journal of Production Economics,2015,163:48-60.
[15] MATSUMOTO M,KOMATSU S. Demand forecasting for production planning in remanufacturing[J]. International Journal of Advanced Manufacturing Technology,2015,79:161-175.
[16] 张卫,李仁旺,石先蔚,等. 基于集对分析的制造服务需求动态挖掘方法[J]. 计算机集成制造系统,2016,22(1):62-69. ZHANG Wei,LI Renwang,SHI Xianwei,et al. Dynamic mining method of manufacturing services demand based on set pair[J]. Computer Integrated Manufacturing Systems,2016,22(1):62-69.
[17] LIU Jun,ZHANG Zhinan,EVANS R,at el. Web services-based knowledge sharing,reuse and integration in the design evaluation of mechanical systems[J]. Robotics and Computer-Integrated Manufacturing,2019,57:271-281.
[18] WU Shanyu,ZHANG Ping,LI Fang,et al. A hybrid discrete particle swarm optimization-genetic algorithm for multi-task scheduling problem in service oriented manufacturing systems[J]. Journal of Central South University,2016,23(2):421-429.
[19] QUINTANILLA F G,CARDIN O,L'ANTON A,et al. A modeling framework for manufacturing services in service-oriented holonic manufacturing systems[J]. Engineering Applications of Artificial Intelligence,2016,55(C):26-36.
[20] GUIDAT T,BARQUET A P,WIDERA H,et al. Guidelines for the definition of innovative industrial product-service systems (PSS) business models for remanufacturing[J]. Procedia CIRP,2014,16:193-198.
[21] 谢文明,刘晓,江志斌. 基于服务型制造的再制造批量计划问题[J]. 系统管理学报,2014,23(2):271-276. XIE Wenming,LIU Xiao,JIANG Zhibin. Remanufacturing lot-sizing problem for service-oriented manufacturing[J]. Journal of Systems & Management,2014,23(2):271-276.
[22] 廖绍华,陈时权,李国龙,等. 机床综合再制造服务模式及实践[J]. 金属加工(冷加工),2009(20):16-17. LIAO Shaohua,CHEN Shiquan,LI Guolong,et al. Serve mode & practice of machine tool comprehensive reconstruction[J]. World Manufacturing Engineering & Market,2009(20):16-17.
[23] 熊颖清,夏绪辉,王蕾. 面向多生命周期的再制造服务活动决策方法研究[J]. 机械设计与制造,2017(2):108-111. XIONG Yingqing,XIA Xuhui,WANG Lei,et al. Research on method of the remanufacturing service activities decision-making based on the multi-life cycle[J]. Machinery Design & Manufacture,2017(2):108-111.
[24] 尹露,夏绪辉,周敏,等. 基于QoS的再制造服务评价方法[J]. 机械设计与制造,2016(11):265-269. YIN Lu,XIA Xuhui,ZHOU Min,et al. Evaluation method of remanufacturing service based on QoS[J]. Machinery Design & Manufacture,2016(11):265-269.
[25] 盛步云,张成雷,卢其兵,等. 云制造服务平台供需智能匹配的研究与实现[J]. 计算机集成制造系统,2015,21(3):822-830. SHENG Buyun,ZHANG Chenglei,LU Qibing,et al. Research and implementation of cloud manufacturing service platform's intelligent matching for supply and demand[J]. Computer Integrated Manufacturing Systems,2015,21(3):822-830.
[26] XIA Hui,HU Chunqiang,XIAO Fu,et al. An efficient social-like semantic-aware service discovery mechanism for large-scale Internet of Things[J]. Computer Networks,2019,152:210-220.
[27] BOUZARY H,CHEN F F,KRISHNAIYER K. Service matching and selection in cloud manufacturing:a state-of the-art review[J]. Procedia Manufacturing,2018,7(149):1128-1136.
[28] SARAVANA B B,KARTHIKEYAN N K,KUMAR R S R. Fuzzy service conceptual ontology system for cloud service recommendation[J]. Computers & Electrical Engineering,2018,69:435-446.
[29] 杨腾,张映锋,王晋,等. 云制造模式下制造服务主动发现与敏捷配置方法[J]. 计算机集成制造系统,2015,21(4):1124-1133. YANG Teng,ZHANG Yingfeng,WANG Jin,et al. Initiative discovery and agile configuration of manufacturing services for cloud manufacturing[J]. Computer Integrated Manufacturing Systems,2015,21(4):1124-1133.
[30] WANG Lei,ZHOU Wenbin,ZHANG Zelin,et al. Discovery strategy and method for remanufacturing service demand using situational semantic network[J]. IEEE Access,2019,6(1):76878-76890.
[31] HUBoran,ZHOU Zhangbing,CHENG Zehui. Web services recommendation leveraging semantic similarity computing[J]. 2018,129:35-44.
[32] 阴艳超,丁卫刚,吴磊. 基于不确定规则推理的云制造知识服务方法[J]. 计算机集成制造系统,2015,21(4):1114-1123. YIN Yanchao,DING Weigang,WU Lei. Knowledge service method of cloud manufacturing based on uncertain rule reasoning[J]. Computer Integrated Manufacturing Systems,2015,21(4):1114-1123.
[33] 李新,董朝阳. 基于本体映射的云制造资源与加工任务智能匹配[J]. 组合机床与自动化加工技术,2015(11):157-160. LI Xin,DONG Zhaoyang. A method of intelligent matching technique of cloud manufacturing resources and processing tasks based on ontology mapping[J]. Modular Machine Tool & Automatic Manufacturing Technique,2015(11):157-160.
[34] 吴雪峰,马路. 数据挖掘技术及在制造业的应用[J]. 计算机应用与软件,2017,34(10):71-77,123. WU Xuefeng,MA Lu. Data minging technology and its application in manufacturing industry[J]. Computer Applications and Software,2017,34(10):71-77,123.
[35] 张汉江,甘兴,赖明勇. 最优价格与回收努力激励的闭环供应链协调[J]. 系统工程学报,2015,30(2):201-209. ZHANG Hanjiang,GAN Xing,LAI Mingyong. Coordination of closed-loop supply chain with the optimal price and recycle effort incentive contract[J]. Journal of Systems Engineering,2015,30(2):201-209.
[36] 聂佳佳,王拓,丁龙. 零售商回收模式下制造商回收激励合同设计[J]. 管理工程学报,2017,31(4):116-122. NIE Jiajia,WANG Tuo,DING Long. Design of recycling incentive contract by manufacturer with retailer take-back mode[J]. Journal of Industrial Engineering and Engineering Management,2017,31(4):116-122.
[37] GUO Lingling,QU Ying,TSENG M L,et al. Two-echelon reverse supply chain in collecting waste electrical and electronic equipment:a game theory model[J]. Computers & Industrial Engineering,2018,126:187-195.
[38] GOVINDAN K,SOLEIMANI H. A review of reverse logistics and closed-loop supply chains:a journal of cleaner production focus[J]. Journal of Cleaner Production,2016,142(1):371-384.
[39] 夏绪辉,刘飞. 逆向供应链物流的内涵及研究发展趋势[J]. 机械工程学报,2005,41(4):103-109. XIA Xuhui,LIU Fei. Connotation state of the art and research tendency of reverse supply chain logistics[J]. Journal of Mechanical Engineering,2005,41(4):103-109.
[40] GOVINDAN K,POPIUC M N. Reverse supply chain coordination by revenue sharing contract:A case for the personal computers industry[J]. European Journal of Operational Research,2014,233(2):326-336.
[41] DAS D,DUTTA P. A system dynamics framework for integrated reverse supply chain with three way recovery and product exchange policy[J]. Computers & Industrial Engineering,2013,66(4):720-733.
[42] GOU Qinglong,LIANG Liang,HUANG Zhimin,et al. A joint inventory model for an open-loop reverse supply chain[J]. International Journal of Production economics,2008,116:28-42.
[43] 高举红,侯丽婷,王海燕,等. 考虑碳排放的闭环供应链收益波动规律分析[J]. 机械工程学报,2015,51(2):190-197. GAO Juhong,HOU Liting,WANG Haiyan,et al. Regularity research on revenue fluctuation analysis of closed-loop supply chain considered carbon emissions[J]. Journal of Mechanical Engineering,2015,51(2):190-197.
[44] 夏绪辉,王蕾. 逆向供应链及其服务[M]. 北京:机械工业出版社,2018. XIA Xuhui,WANG Lei. Reverse supply chain and its service[M]. Beijing:China Mechanical Press,2018.
[45] 王蕾,夏绪辉,曹建华. 逆向供应链概念性服务模块二层匹配方法及应用[J]. 机械工程学报,2017,53(2):164-174. WANG Lei,XIA Xuhui,CAO Jianhua. A two-hierarchy conceptual module matching of reverse supply chain service[J]. Journal of Mechanical Engineering,2017,53(2):164-174.
[46] 张秀芬. 复杂产品可拆卸性分析与低碳结构进化设计技术研究[D]. 浙江大学,2011. ZHANG Xiufeng. Complex product disassemblability analysis and structure design for low-carbon[D]. Zhejiang University,2011.
[47] REN Yaping,ZHANG Chaoyong,ZHAO Fu,et al. An asynchronous parallel disassembly planning based on genetic algorithm[J]. European Journal of Operational Research,2018,269(2):647-660.
[48] WANG Kaipu,LI Xinyu,GAO Liang,et al. Partial disassembly line balancing for energy consumption and profit under uncertainty[J]. Robotics and Computer- Integrated Manufacturing,2019,59:235-251.
[49] FAVI C,MARCONI M,GERMANI M,et al. A design for disassembly tool oriented to mechatronic product demanufacturing and recycling[J]. Advanced Engineering Informatics,2019,11:62-79.
[50] KALAYCI C B,SURENDRA M G. A particle swarm optimization algorithm with neighborhood-based mutation for sequence-dependent disassembly line balancing problem[J]. The International Journal of Advanced Manufacturing Technology,2013,69(1-4):197-209.
[51] DING Liping,FENG Yixiong,TAN Jianrong,et al. A new multi-objective ant colony algorithm for solving the disassembly line balancing problem[J]. The International Journal of Advanced Manufacturing Technology,2010,48:761-771.
[52] LIU Jiayi,ZHOU Zude,PHAM D T,et al. An improved multi-objective discrete bees algorithm for robotic disassembly line balancing problem in remanufacturing[J]. The International Journal of Advanced Manufacturing Technology,2018,97(9-12):3937-3962.
[53] 邹宾森,张则强,蔡宁,等. 工具约束下多目标拆卸线平衡问题的猫群模拟退火算法[J]. 计算机集成制造系统,2018,24(9):82-94. ZOU Binsen,ZHANG Zeqiang,CAI Ning,et al. Cat swarm simulated annealing algorithm for disassembly line balancing problem under tool constraints[J]. Computer Integrated Manufacturing Systems,2018,24(9):82-94.
[54] WANG Hengyu,PENG Qingjin,ZHANG Jian,et al. Selective disassembly planning for the end-of-life product[J]. Procedia CIRP,2017,60:512-517.
[55] AGRAWAL S,TIWARI M K. A collaborative ant colony algorithm to stochastic mixed-model U-shaped disassembly line balancing and sequencing problem[J]. International Journal of Production Research,2008,46(6):1405-1429.
[56] 夏绪辉,周萌,王蕾,等. 再制造拆卸服务生产线及其平衡优化[J]. 计算机集成制造系统,2018,24(10):120-129. XIA Xuhui,ZHOU Meng,WANG Lei,et al. Remanufacturing disassembly service line and balancing optimization method[J]. Computer Integrated Manufacturing Systems,2018,24(10):120-129.
[57] 钱正春,黄海鸿,韩刚,等. 面向再制造的金属磁记忆检测技术研究综述及工程应用案例[J]. 机械工程学报,2018,54(17):235-245. QIAN Zhengchun,HUANG Haihong,HAN Gang,et al. Review on metal magnetic memory detection technology in remanufacturing and case study in engineering[J]. Journal of Mechanical Engineering,2018,54(17):235-245.
[58] PENG Shitong,LI Tao,LI Mengyun,et al. An integrated decision model of restoring technologies selection for engine remanufacturing practice[J]. Journal of Cleaner Production,2019,206:598-610.
[59] WANG Han,JIANG Zhigang,ZHANG Xugang,et al. A fault feature characterization based method for remanufacturing process planning optimization[J]. Journal of Cleaner Production,2017,161:708-719.
[60] ZHENG Y,QURESHI A J,AHMAD R. Algorithm for remanufacturing of damaged parts with hybrid 3D printing and machining process[J]. Manufacturing Letters,2018,15(A):38-41.
[61] 刘明周,张玺,刘从虎,等. 不确定环境下再制造加工车间生产调度优化方法[J]. 机械工程学报,2014,50(10):206-212. LIU Mingzhou,ZHANG Xi,LIU Conghu,et al. Optimization method of remanufacturing reprocessing shop scheduling under uncertain conditions[J]. Journal of Mechanical Engineering,2014,50(10):206-212.
[62] 谭俊,陈建敏,刘敏,等. 面向绿色制造与再制造的表面工程[J]. 机械工程学报,2011,47(20):95-103. TAN Jun,CHEN Jianmin,LIU Min,et al. Surface engineering towards green manufacturing and remanufacturing[J]. Journal of Mechanical Engineering,2011,47(20):95-103.
[63] 徐滨士,夏丹,谭君洋,等. 中国智能再制造的现状与发展[J]. 中国表面工程,2018,31(5):1-13. XU Binshi,XIA Dan,TAN Junyang,et al. Status and development of intelligent remanufacturing in China[J]. 2018,31(5):1-13.
[64] GOODALL P,SHARPE R,WEST A. A data-driven simulation to support remanufacturing operations[J]. Computers in Industry,2019,105:48-60.
[65] PENG Shitong,LI Tao,ZHAO Jiali,et al. Petri net-based scheduling strategy and energy modeling for the cylinder block remanufacturing under uncertainty[J]. Robotics and Computer-Integrated Manufacturing,2019,58:208-219.
[66] SATO R S,BORSATO M,IAKSCH J S,et al. Product development,digital manufacturing,and product manufacturing information:A bibliometric and systemic analysis[J]. Procedia Manufacturing,2018,17:190-197.
[67] 姜月娟,卢秉恒,方学伟,等. 基于3D打印的网络化集散制造模式研究[J]. 计算机集成制造系统,2016,22(6):1424-1433. JIANG Yuejuan,LU Bingheng,FANG Xuewei,et al. 3D printing-based internet collect-manufacturing mode[J]. Computer Integrated Manufacturing Systems,2016,22(6):1424-1433.
[68] 李孝斌,尹超. 面向生产过程云服务的制造执行系统[J]. 计算机集成制造系统,2016,22(1):177-188. LI Xiaobin,YIN Chao. Cloud services oriented manufacturing execution system for production process[J]. Computer Integrated Manufacturing Systems,2016,22(1):177-188.
[69] ZHANG Shuyou,XU Jinghua,GOU Huawei,et al. A research review on the key technologies of intelligent design for customized products[J]. Engineering,2017,3(5):631-640.
[70] ZHANG Yingfeng,ZHANG Geng,QU Ting,et al. Analytical target cascading for optimal configuration of cloud manufacturing services[J]. Journal of Cleaner Production,2017,151:330-343.
[71] CHANMO J,LEE J Y,YOON J-S,et al. Applications' integration and operation platform to support smart manufacturing by small and medium-sized enterprises[J]. Procedia Manufacturing,2017,11:1950-1957.
[72] ZHANG Yongping,ZHANG Pengyuan,TAO Fei,at al. Consensus aware manufacturing service collaboration optimization under blockchain based Industrial Internet platform[J]. Computers & Industrial Engineering,2019. 135:1025-1035.
[73] 谭明智,易树平,曾锐. 基于服务满意度的云制造服务综合信任评价模型[J]. 中国机械工程,2015,26(18):2473-2480. TAN Mingzhi,YI Shuping,ZENG Rui. A comprehensive trust evaluation model for cloud manufacturing service based on service satisfaction[J]. China Mechanical Engineering,2015,26(18):2473-2480.
[74] 丁进良,杨翠娥,陈远东,等. 复杂工业过程智能优化决策系统的现状与展望[J]. 自动化学报,2018,44(11):13-25. DING Jinliang,YANG Cuie,CHEN Yuandong,et al. Research progress and prospects of intelligent optimization decision making in complex industrial process[J]. Acta Automatica Sinica,2018,44(11):1931-1943.
[75] 朱胜. 柔性增材再制造技术[J]. 机械工程学报,2013,49(23):1-5. ZHU Sheng. Mobile additive remanufacturing[J]. Journal of Mechanical Engineering,2013,49(23):1-5.
[76] 黄少华,郭宇,查珊珊,等. 离散车间制造物联网及其关键技术研究与应用综述[J]. 计算机集成制造系统,2019,25(2):284-302. HUANG Shaohua,GUO Yu,ZHA Shanshan,et al. Review on internet-of-manufacturing-things and key technologies for discrete workshop[J]. Computer Integrated Manufacturing Systems,2019,25(2):284-302.
[77] KOSMAS A,KONSTANTINOS S,EVANGELOS X,et al. An industrial Internet of things based platform for context-aware information services in manufacturing[J]. International Journal of Computer Integrated Manufacturing,2018,31(11):1111-1123.
[78] BARQUET A P,ROZENFELD H,FORCELLINI A F. An integrated approach to remanufacturing:model of a remanufacturing system[J]. Journal of Remanufacturing,2013,3(1):1-11.
[79] 温海骏. 不确定环境下再制造生产计划与车间调度集成优化研究[D]. 合肥:合肥合肥工业大学,2015. WEN Haijun. Integrated optimization of remanufacturing production planning and scheduling under uncertain environment[D]. Hefei:Hefei University of Technology,2015.

再制造服务的广义内涵、研究现状与发展趋势

Extensive Concept, State-of-the Art Developing Trends of Remanufacturing Service

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	徐明宇, 陈渭. 液态金属用作润滑剂的研究现状与展望[J]. 机械工程学报, 2020, 56(9): 137-146.
[2]	赵雅婷, 赵韩, 梁昌勇, 孙浩, 吴其林. 养老服务机器人现状及其发展建议[J]. 机械工程学报, 2019, 55(23): 13-24.
[3]	樊文刚, 刘月明, 李建勇. 高速铁路钢轨打磨技术的发展现状与展望[J]. 机械工程学报, 2018, 54(22): 184-193.
[4]	刘飞, 刘培基, 李聪波, 庹军波, 蔡维. 制造系统能量效率研究的现状及难点问题^*[J]. 机械工程学报, 2017, 53(5): 1-11.
[5]	房善想, 赵慧玲, 张勤俭. 超声加工技术的应用现状及其发展趋势[J]. 机械工程学报, 2017, 53(19): 22-32.
[6]	沈功田. 承压设备无损检测与评价技术发展现状[J]. 机械工程学报, 2017, 53(12): 1-12.
[7]	高峰, 郭为忠. 中国机器人的发展战略思考[J]. 机械工程学报, 2016, 52(7): 1-5.
[8]	秦国梁, 武传松. 铝合金/钢异种材料熔钎焊接工艺及其研究现状^*[J]. 机械工程学报, 2016, 52(24): 24-35.
[9]	李瑞琴, 王英, 王明亚, 赵耀虹, 宋杰. 混合驱动机构研究进展与发展趋势^*[J]. 机械工程学报, 2016, 52(13): 1-9.
[10]	郭子炘,李庆民,闫江燕,马宇飞,SiewWahHoon. 海上风电场雷击演化物理机制的研究综述[J]. 电气工程学报, 2015, 10(5): 10-19.
[11]	赵争鸣,袁立强,鲁挺,贺凡波. 我国大容量电力电子技术与应用发展综述[J]. 电气工程学报, 2015, 10(4): 26-34.
[12]	王田苗;陶永. 我国工业机器人技术现状与产业化发展战略[J]. , 2014, 50(9): 1-13.
[13]	周志雄;肖航;李伟;黄向明. 微细切削用微机床的研究现状及发展趋势[J]. , 2014, 50(9): 153-160.
[14]	刘金娜;徐滨士;王海斗;金国;朱丽娜. 薄膜疲劳失效预测方法与损伤机制的研究进展[J]. , 2014, 50(20): 26-34.
[15]	陈鹰. 海洋技术定义及其发展研究[J]. , 2014, 50(2): 1-7.