基于各向异性特征的7050-T7451铝合金位错密度及其演变规律

doi:10.3901/JME.2021.18.164

摘要/Abstract

摘要： 7050-T7451铝合金被广泛用于制造具有轻量化、薄壁化需求的航空航天结构件。作为多晶体金属材料，铝合金塑性变形行为呈现出明显的各向异性特征，不同的加载路径直接影响薄壁扁宽件的服役性能，因此考虑各向异性特征深入分析材料力学性能的微观响应机制具有重要的工程意义。以7050-T7451铝合金为研究对象，结合试验与X射线衍射线形分析方法，采用位错密度值定量表征并研究位错在不同空间角度取向、不同加载条件下的演化规律。结果表明：晶粒取向随着变形过程而发生变化，且具有（111）晶面择尤取向现象；不同加载条件、成形角度下位错密度取值范围介于0.275 2×10¹⁴～1.581 8×10¹⁴ m^-2；不同成形角度下的位错密度随应变率的提高均先增大后减小，随温度的变化则具有明显差异；不同加载条件下，位错密度在成形角度0°～90°范围内均呈现出先减小后增大再减小后增大的趋势，室温下成形角度为45°时，位错密度达到最大值1.581 8×10¹⁴ m^-2。7050-T7451铝合金微观变形机制的研究为掌握材料各向异性变形行为及其在航空航天领域的工程应用提供了理论支撑。

关键词: 7050-T7451铝合金, 各向异性, 位错密度, X射线衍射

Abstract: 7050-T7451 aluminum alloy is widely used in aerospace structures, which have the requirements of lightweight and thin wall. As a polycrystalline metal material, the plastic deformation behavior of aluminum alloy presents obvious anisotropy characteristics. Different loading paths will seriously affect the service performance of thin-walled flat-wide parts. Therefore, it is of great significance to deeply analyze the microscopic response mechanism of anisotropy of material mechanical properties. Taking 7050-T7451 aluminum alloy as the research object, combining experiments and X-ray diffraction line analysis methods, the dislocation density value is used to quantitatively characterize and study the movement of dislocations under different spatial angle orientations and different loading conditions. The results show that the grain orientation changes with the deformation process, and there is a phenomenon of (111) crystal plane selective orientation. The range of dislocation density under different loading conditions and forming angles is between 0.275 2×10¹⁴-1.581 8×10¹⁴ m^-2. The dislocation density at different forming angles increases first and then decreases with the increase of strain rate, and there is a significant difference with temperature changes. Under different loading conditions, the dislocation density in the forming angle range of 0°-90°shows a trend of first decreasing, then increasing, then decreasing and increasing. When the forming angle is 45åt room temperature, the dislocation density reaches the maximum of 1.581 8×10¹⁴ m^-2. The research on the micro-deformation mechanism of 7050-T7451 aluminum alloy can better grasp the anisotropic deformation behavior of the material and provide theoretical support for its engineering application in the aerospace field.

Key words: aluminum alloy 7050-T7451, anisotropy, dislocation density, X-ray diffraction

中图分类号:

TG115

王慧, 付秀丽, 门秀花, 张泽文. 基于各向异性特征的7050-T7451铝合金位错密度及其演变规律[J]. 机械工程学报, 2021, 57(18): 164-171.

WANG Hui, PAN Yongzhi, FU Xiuli, MEN Xiuhua, ZHANG Zewen. Dislocation Density and Its Evolution of Aluminum Alloy 7050 Based on Anisotropy[J]. Journal of Mechanical Engineering, 2021, 57(18): 164-171.

参考文献

[1] PEREZ I,MADARIAG A,CUESTA M,et al. Effect of cutting speed on the surface integrity of face milled 7050-T7451 aluminium workpieces[J]. Procedia CIRP,2018,71:460-465.
[2] YANG Wenjing,DING Hua,MU Yongliang,et al. Achieving high strength and ductility in double-sided friction stir processing 7050-T7451 aluminum alloy[J]. Material science and Engineering A,2017,707(7):193-198.
[3] 王罡,任珂,胡毅森,等. 基于微观组织特征的航天铝铜合金力学行为研究[J]. 机械工程学报,2018,54(9):77-85. WANG Gang,REN Ke,HU Yisen,et al. Microstructural characteristics-based mechanical behavior of aerospace Al-Cu alloys[J]. Journal of Mechanical Engineering,2017,707(7):193-198.
[4] 任伟才,王金花,丛福官,等. 7×××系超高强铝合金板材各向异性的研究现状[J]. 轻合金加工技术,2019,47(6):9-19. REN Weicai,WANG Jinhua,CONG Fuguan,et al. Research status of anisotropy of 7×××series ultra-high-strength aluminum alloy[J]. Light Alloy Fabrication Technology,2019,47(6):9-19.
[5] LI J,WANG Y. Impact of pre-straining on the hardness and anisotropic mechanical behavior of ZK61 Mg alloy[J]. Vacuum,2020:109465.
[6] JUN Cao,LI Fuguo,MA Xinkai,et al. Study of fracture behavior for anisotropic 7050-T7451 high-strength aluminum alloy plate[J]. International Journal of Mechanical Sciences,2017,128-129:445-458.
[7] MAO Bo,ZHANG Xing,MENEZES P L,et al. Anisotropic microstructure evolution of an AZ31B magnesium alloy subjected to dry sliding and its effects on friction and wear performance[J]. Materialia,2019,8:100444.
[8] NI Chenbing,ZHU Lida,ZHENG Zhongpeng,et al. Effect of material anisotropy on ultra-precision machining of Ti-6Al-4V alloy fabricated by selective laser melting[J]. Journal of Alloys and Compounds,2020,848,156457.
[9] ZHAO Di,CHEN Xianhua,WANG Xiaolong,et al. Effect of impurity reduction on dynamic recrystallization,texture evolution and mechanical anisotropy of rolled AZ31 alloy[J]. Materials Science and Engineering:A,2020,773:138741.
[10] 骆雨萌,刘金旭,李树奎,等. 热轧温度对Ti-6AL-4V合金组织及动态力学性能的影响[J]. 稀有金属材料与工程,2018,382(5):13-20. LUO Yumeng,LIU Jinxu,LI Shukui,et al. Effect of hot-rolling temperature on microstructure and dynamic mechanical properties of Ti-6Al-4V alloy[J]. Rare Metal Materials and Engineering,2018,382(5):13-20.
[11] KHAGYKO M,MYHR O R,HOPPERSTAD O S. Work hardening and plastic anisotropy of naturally and artificially aged aluminium alloy AA6063[J]. Mechanics of Materials,2019,136:103069.
[12] 孟莹,付秀丽,潘永智,等. 考虑成形方向的航空铝合金修正本构模型的构建[J]. 机械工程学报,2018,54(22):78-85. MENG Ying,FU Xiuli,PAN Yongzhi,et al. Modified johnson-cook constitutive model of aerial aluminum alloy 7050-T7415 considering the forming direction effect[J]. Journal of Mechanical Engineering,2018,54(22):78-85.
[13] WANG Xinyun,HE Hu,XIA Juchen. Effect of deformation condition on plastic anisotropy of as-rolled 7050 aluminum alloy plate[J]. Materials Science and Engineering:A,2009,515(1-2):1-9.
[14] 杨中玉,张津,郭学博,等. 铝合金的织构及测试分析研究进展[J]. 精密成形工程,2013,5(6):1-6. YANG Zhongyu,ZHANG Jin,GUO Xuebo,et al. Research progress on aluminum alloy texture and test analysis[J]. Journal of Netshape Forming Engineering,2013,5(6):1-6.
[15] BHATTACHARYYA J J,BITTMANN B,AGNEW S R. The effect of precipitate-induced backstresses on plastic anisotropy:Demonstrated by modeling the behavior of aluminum alloy,7085[J]. International Journal of Plasticity,2019,117:3-20.
[16] 姚松林,裴晓阳,于继东,等. 基于位错动力学方法的动态塑性变形研究[J]. 高压物理学报,2019,33(3):94-106. YAO Songlin,PEI Xiaoyang,YU Jidong,et al. Overview of the study of dynamical plastic deformation based on dislocation dynamics method[J]. Chinese Journal of High Pressure Physics,2019,33(3):94-106.
[17] ZHANG Mingda,CAO Jingxia,HUANG Xu. Local softening behavior accompanied by dislocation multiplication accelerates the failure of Ti-6Al-2Sn-4Zr-2Mo-0.1Si alloy under dwell fatigue load[J]. Scripta Materialia,2020,186:33-38.
[18] SGA B,BBA B,EMA B,et al. Multiscale modelling of precipitation hardening in Al-Cu alloys:Dislocation dynamics simulations and experimental validation[J]. Acta Materialia,2020,188:475-485.
[19] ZAMANI M,DINI H,SVOBODA A,et al. A dislocation density based constitutive model for as-cast Al-Si alloys:Effect of temperature and microstructure,International[J]. Journal of Mechanical Sciences,2017,121:164-170.
[20] HAJYAKBARY F,SIETSMA J,BÖTTGER A J,et al. Santofimia,An improved X-ray diffraction analysis method to characterize dislocation density in lath martensitic structures[J]. Materials Science and Engineering A,2015,639:206-218.
[21] HA Changwan,BOHLEN J,YI Sangbong,et al. Influence of Nd or Ca addition on the dislocation activity and texture changes of Mg-Zn alloy sheets under uniaxial tensile loading[J]. Materials Science and Engineering,2019,761:138053.1-138053.11.
[22] YOUSSEF M,SCATTERGOOD R O,MURTY K L,et al. Nanocrystalline Al-Mg alloy with ultrahigh strength and good ductility[J]. Scripta Materialia,2006,54(2):251-256.
[23] ZHAO Y H,LIAO X Z,JIN Z,et al. Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing[J]. Acta Materialia,2004,52(15):4589-4599.
[24] XU Y,ZHAN L,HUANG M,et al. Anisotropy in creep-ageing behavior of textured Al-Cu-Mg alloy[J]. International Journal of Lightwght Materials and Manufacture,2018,1(1):40-46.