两相流中气泡含量对大型可倾瓦径向轴承性能影响的试验研究

doi:10.3901/JME.2021.11.220

机械工程学报 ›› 2021, Vol. 57 ›› Issue (11): 220-227.doi: 10.3901/JME.2021.11.220

扫码分享

两相流中气泡含量对大型可倾瓦径向轴承性能影响的试验研究

胡杨¹, 朱礼进¹, 孟永钢²

1. 上海大学机电工程与自动化学院上海 200444;
2. 清华大学摩擦学国家重点实验室北京 100084

收稿日期:2020-10-29 修回日期:2021-03-19 出版日期:2021-06-05 发布日期:2021-07-23
通讯作者: 孟永钢(通信作者),男,1961年出生,博士,教授,博士研究生导师。主要研究方向为摩擦磨损机理,滚动轴承,滑动轴承等。E-mail:mengyg@mail.tsinghua.edu.cn
作者简介:胡杨,男,1988年出生,博士,讲师,硕士研究生导师。主要研究方向为可倾瓦轴承、空气箔片轴承等。E-mail:huyang0330@shu.edu.cn;朱礼进,男,1964年出生,硕士,工程师。主要研究方向为可倾瓦轴承等。E-mail:ljzhu@mail.shu.edu.cn
基金资助:
国家自然科学基金（51905298）和上海市科技创新行动计划（20dz1204903）资助项目。

Experimental Study on Influence of Gas Volume Fraction in Two-phase Flow on Lubrication Performance of Large Tilting Pad Journal Bearing

HU Yang¹, ZHU Lijin¹, MENG Yonggang²

1. School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200072;
2. State Key Laboratory of Tribology, Tsinghua University, Beijing 100084

Received:2020-10-29 Revised:2021-03-19 Online:2021-06-05 Published:2021-07-23

摘要/Abstract

摘要： 可倾瓦滑动轴承是大型燃气轮机等旋转机械的重要部件，转子与轴瓦间隙内为复杂的油气混合两相流，其特性直接影响轴承性能。为了研究油气两相流对可倾瓦轴承性能的影响，本研究搭建了高速可倾瓦滑动轴承实验台，针对大尺寸定向润滑可倾瓦径向滑动轴承，在多载荷和多转速工况下进行不同气泡率的油气两相流试验。通过试验研究载荷、转速和两相流中气泡率对可倾瓦滑动轴承油膜压力、油膜厚度、瓦面温度和电动机功率的影响。相关试验结果有助于解释和理解空穴和贫油效应，并为优化可倾瓦轴承性能提供依据。

关键词: 可倾瓦滑动轴承, 两相流, 空穴, 湍流, 油膜压力, 瓦面温度

Abstract: Tilting pad journal bearing (TPJB) is an important part of large gas turbine and other rotating machinery. There is a complex oil-gas two-phase flow in the gap between rotor and bearing pad, and its characteristics directly affect the bearing performance. In order to study the effect of oil-gas two-phase flow on the performance of TPJBs, a high-speed TPJB test rig is built. The oil-gas two-phase flow experiments with different gas volume fractions are carried out for large-size directly lubricated tilting pad journal bearing under different load and speed conditions. The effects of load, rotating speed, and gas volume fraction in two-phase flow on oil film pressure, film thickness, pad surface temperature and motor power are studied experimentally. The experimental results are helpful to understand cavitation effects, and to optimize the design of tilting pad journal bearings.

Key words: tilting pad journal bearing, two phase flow, cavitation, turbulence, oil film pressure, pad surface temperature

中图分类号:

TH133

胡杨, 朱礼进, 孟永钢. 两相流中气泡含量对大型可倾瓦径向轴承性能影响的试验研究[J]. 机械工程学报, 2021, 57(11): 220-227.

HU Yang, ZHU Lijin, MENG Yonggang. Experimental Study on Influence of Gas Volume Fraction in Two-phase Flow on Lubrication Performance of Large Tilting Pad Journal Bearing[J]. Journal of Mechanical Engineering, 2021, 57(11): 220-227.

参考文献

[1] GARDNER W W,ULSCHMID J G. Turbulence effects in two journal bearing applications[J]. ASME J. Lubr. Technol.,1974,96(1):15-21.
[2] TANIGUCHI S,MAKIN T,TAKESHITA K,et al. A thermo hydrodynamic analysis of large tilting-pad journal bearing in laminar and turbulent flow regimes with mixing[J]. Transactions of the Americal Society of Mechanical Engineers,Journal of Tribology,1990,112(3):542-550.
[3] ARIHARA H,KAMEYAMA Y,BABA,Y,et al. A Thermoelastohydrodynamic analysis for the static performance of high-speed-heavy load tilting-pad journal bearing operating in the turbulent flow regime and comparisons to test data[J]. Journal of Engineering for Gas Turbines and Power,2019,141(2):021023-1-021023-9.
[4] BANG KB,KIM JH,CHO YJ. Comparison of power loss and pad temperature for leading edge groove tilting pad journal bearings and conventional tilting pad journal bearings[J]. Tribology International,2010,43:1287-1293.
[5] ZHANG,Fan,WU Ouyang,HONG Honglun,et al. Experimental study on pad temperature and film thickness of tilting-pad journal bearings with an elastic-pivot pad[J]. Tribology International,2015,88,228-235.
[6] YOKOYAMA S,SANO T,YOSHIMINE C,et al. Development of low loss direct lubricated two pads journal bearing[C]//. Proceedings of International Gas Turbine Congress,Tokyo,2015,November 15-20.
[7] HAGEMANN T,SCHWARZE H. Theoretical and experimental analyses of directly lubricated tilting-pad journal bearings with leading edge groove[J]. Journal of Engineering for Gas Turbines and Power,2018,141(5):051010-1-051010-10.
[8] HE M,ALLAIRE P,BARRETT L,et al. Thermohydrodynamic modeling of leading-edge groove bearings under starvation condition[J]. Tribology Transactions,2005,48(3):362-369.
[9] HAGEMANN T,ZEMELLAP,PFAU B,et al. Experimental and theoretical investigations on transition of lubrication conditions for a five-pad tilting-pad journal bearing with eccentric pivot up to highest surface speeds[J]. Tribology International,2020,142:106008.
[10] MERMERTAS Ü,HAGEMANN T,BRICHART C. Optimization of a 900 mm tilting-pad journal bearing in large steam turbines by advanced modeling and validation[J],Journal of Engineering for Gas Turbines and Power,2019,141(2).
[11] SANO T,MAGOSHI R,SHINOHARA T,et al. Confirmation of performance and reliability of direct lubricated tilting two pads bearing[J]. Proceedings of the Institution of Mechanical Engineers,Part J:Journal of Engineering Tribology,2015,229(8):1011-1021.
[12] SAN A L,KOO B,HEMMI M. A flow starvation model for tilting pad journal bearings and evaluation of frequency response functions:A contribution toward understanding the onset of low frequency shaft motions[J]. Journal of Engineering for Gas Turbines and Power,2018,140(5).
[13] SAN A L,HARDIK J,KAIZAR H,et al. On the effect of supplied flow rate to the performance of a tilting-pad journal bearing-static load and dynamic force measurements[J],ASME J. Eng. Gas Turbines Power,2020,142(12):121006.
[14] NICHOLS B R,FITTRO R L,GOYNE C P. Subsynchronous vibration patterns under reduced oil supply flow rates[J]. Journal of Engineering for Gas Turbines and Power,2018,140(10).
[15] NICHOLAS J C,ELLIOTT G,SHOUP T P,et al. Tilting pad journal bearing starvation effects[C]//Proceedings of the 37th Turbomachinery Symposium. Texas A&M University. Turbomachinery Laboratories,2008.
[16] SNYDER T,BRAUN M,PIERSON K. Two-way coupled Reynolds and Rayleigh-Plesset equations for a fully transient,multiphysics cavitation model with pseudo-cavitation[J]. Tribology International,2016,93:429-445.
[17] JARAMILLO A,BUSCAGLIA G. A stable numerical strategy for Reynolds-Rayleigh-Plesset coupling[J]. Tribology International,2019,130:191-205.
[18] MIKULA A. Evaluating tilting-pad thrust bearing operating temperatures[J],ASLE Transactions,1986,29(2):173-178

两相流中气泡含量对大型可倾瓦径向轴承性能影响的试验研究

Experimental Study on Influence of Gas Volume Fraction in Two-phase Flow on Lubrication Performance of Large Tilting Pad Journal Bearing

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	郭金道, 赵欢, 王平, 孙丹, 王双. 基于引气封油方式的轴承腔密封间隙油气两相泄漏流动特性数值与试验研究[J]. 机械工程学报, 2024, 60(3): 214-225.
[2]	田玉思, 焦永刚, 孙会凯, 刘斌, 韩飞. 通断型微通道的结构优化与流动特性研究[J]. 机械工程学报, 2023, 59(4): 274-282.
[3]	孙凯, 罗忠, 李雷, 葛向东, 郑思佳. 带弹性环式挤压油膜阻尼器转子系统装配特性及试验研究[J]. 机械工程学报, 2023, 59(23): 118-131.
[4]	刘中天, 黄护林, 王彦利, 王少政, 黄山. 液态金属磁流体发电系统气液两相混合器设计与数值模拟[J]. 机械工程学报, 2023, 59(18): 327-336.
[5]	饶思贤, 华晓春, 赵新生, 郭祥钦, 赵丽, 王孝义. 高流速强湍流下关键因素对环烷酸腐蚀的影响行为研究[J]. 机械工程学报, 2023, 59(16): 204-212.
[6]	闫英, 孙国荣, 董晋彤, 周平. 抽吸电极电解加工微小孔加工工艺研究[J]. 机械工程学报, 2022, 58(5): 268-277.
[7]	李超, 宾光富, 李坚, 王维民. 砂粒粒径对航空涡轴发动机压气机叶片冲蚀磨损的影响研究[J]. 机械工程学报, 2022, 58(19): 180-190.
[8]	李莹, 陈冬京, 王博众, 佟海生, 孔祥东, 张晋. 静置油液中单气泡运动规律研究[J]. 机械工程学报, 2021, 57(24): 93-101.
[9]	刘城, 闫清东, 李娟, 李晋, 邹波. 高功率密度液力变矩器空化特性研究[J]. 机械工程学报, 2020, 56(24): 147-155.
[10]	唐新姿, 李鹏程, 彭锐涛, 陆鑫宇. 湍流工况小型风力机翼型气动特性及稳健优化[J]. 机械工程学报, 2020, 56(2): 192-200.
[11]	朱少禹, 孙军, 李彪, 张潇, 苗恩铭, 任燕平, 朱桂香. 粗糙表面湍流润滑的随机模型[J]. 机械工程学报, 2019, 55(9): 71-79.
[12]	栾新, 乜云利, 李坤乾, 姜迁里, 周丽芹. 6 km自容式湍流观测剖面仪设计与试验研究[J]. 机械工程学报, 2019, 55(20): 231-239.
[13]	姚佳烽, 刘夏移, 徐梓菲, 赵桐, 陈柏, 吴洪涛. 基于微流控芯片的生物细胞电阻抗成像检测技术[J]. 机械工程学报, 2019, 55(2): 1-9.
[14]	陈远龙, 周小超, 陈培譞, 王子权. 基于湍流SST模型电解加工温度场数值仿真研究[J]. 机械工程学报, 2019, 55(17): 215-221.
[15]	曹嘉彬, 黄护林, 朱桂平, 李林永, 李来. 两相流磁流体发电机的性能研究[J]. 机械工程学报, 2018, 54(8): 185-191.