基于切断技术的固有变形获取方法研究

doi:10.3901/JME.2020.08.092

机械工程学报 ›› 2020, Vol. 56 ›› Issue (8): 92-98.doi: 10.3901/JME.2020.08.092

• 特邀专栏：轻质材料焊接与连接 • 上一篇下一篇

扫码分享

基于切断技术的固有变形获取方法研究

梁伟^1,2, 孙晓露¹

1. 重庆交通大学机电与车辆工程学院重庆 400074;
2. 哈尔滨工业大学先进焊接与连接国家重点实验室哈尔滨 150001

收稿日期:2019-09-02 修回日期:2019-12-20 出版日期:2020-04-20 发布日期:2020-05-28
作者简介:梁伟,女,1968年出生,博士,教授。主要研究方向为计算焊接力学、先进制造及结构优化与评价。E-mail:wliangspace@163.com
基金资助:
国家自然科学基金（51375518）和先进焊接与连接国家重点实验室基金（AWJ-16-Z03）资助项目。

Method to Obtain Inherent Deformation of Welded Joint Based on the Cutting Technique

LIANG Wei^1,2, SUN Xiaolu¹

1. College of Mechatronics & Automotive Engineering, Chongqing Jiao Tong University, Chongqing 400074;
2. State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001

Received:2019-09-02 Revised:2019-12-20 Online:2020-04-20 Published:2020-05-28

摘要/Abstract

摘要： 固有变形逆解析法是一种获取焊接接头固有变形的新方法。但是，采用该方法来获得铝合金或高强钢等轻量化结构材料的薄板焊接接头固有变形时，由于焊接过程中产生几何非线性现象的倾向大，逆解析过程中常常出现收敛困难而无法获得固有变形。针对这一问题，研究提出了一种借助于切断手段的方法来消除因几何非线性引起的收敛性问题。文中以钨极惰性气体保护焊和熔化极惰性气体保护焊加工铝合金薄板接头为例，采用提出的“切断法”与“逆解析方法”相结合的新方法来获得了焊接接头固有变形，并在此基础上运用固有应变法再现了原尺寸铝合金焊接接头的焊接变形。通过比较分别由试验法、热-弹-塑性方法和固有应变法得到的焊接变形结果发现，尽管不同焊接方法对变形模式和变形量影响显著，但是利用提出的算法获得的固有变形值得到的焊接变形均能较好地再现热-弹-塑性有限元计算得到的结果。

关键词: 切断法, 逆解析, 屈曲变形, 固有应变

Abstract: Inverse analysis method based on the elastic finite element method and measuring technique is a new method to obtain the inherent deformations of a welded joint. However, when it is used to obtain the inherent deformation of the thin-plate welded joint made of lightweight structural materials such as aluminium alloy or high-strength steel, the tendency of geometric non-linearity occurring during the welding process is large, and convergence is often difficult in the reverse analysis process. Facing this problem, a improved method under the help of cutting technique is proposed to overcome the convergence problem caused by geometric non-linearity. In the current study, two thin-plate joints performed by tungsten inert gas welding (TIG) and melt inert gas welding (MIG) welding process respectively, which have complete different deformation modes, are taken as examples to obtain inherent deformations by the proposed method. Results show that the new method combining the cutting technique and the reverse analysis method can effectively obtain the inherent deformation of the thin-plate welded joint. Using the inherent deformations obtained by the new method, we accurately reproduce the welding deformations of two joints performed by TIG and MIG welding process, and match both the results predicted by thermal elastic plastic FEM and the experimental measurements.

Key words: cutting-method, inverse analysis, buckling distortion, inherent deformation

中图分类号:

TG404

梁伟, 孙晓露. 基于切断技术的固有变形获取方法研究[J]. 机械工程学报, 2020, 56(8): 92-98.

LIANG Wei, SUN Xiaolu. Method to Obtain Inherent Deformation of Welded Joint Based on the Cutting Technique[J]. Journal of Mechanical Engineering, 2020, 56(8): 92-98.

参考文献

[1] 汪建华. 焊接数值模拟技术及其应用[M]. 上海:上海交通大学出版社,2003. WANG Jianhua. Welding numerical simulation technology and its application[M]. Shanghai:Shanghai Jiao Tong University Press,2003.
[2] UEDA Y,MURAKAWA H,MA N. Welding deformation and residual stress prevention[M]. Amsterdam:Elsevier,2012.
[3] MURAKAWA H,UEDA Y. Prediction welding deformation and residual by elastic FEM based on inherent strain[J]. Journal of the Society of Naval Architects of Japan,1996,180(1):739-751.
[4] LIANG Wei,MURAKAWA H. Predicting welding distortion in a panel structure with longitudinal stiffeners using inherent deformations obtained by inverse analysis method[J]. The Scientific World Journal,2014,DOI:10.1155/2014/601417.
[5] 梁伟,周亮,孙晓露,等. 采用固有应变法预测超薄板的焊接变形[J]. 焊接学报,2017,38(3):103-106. LIANG Wei,ZHOU Liang,SUN Xiaolu,et al. Prediction of welding distortion in extra thin plate joint by means of inherent strain method[J]. Transactions of the China Welding Institution,2017,38(3):103-106.
[6] 梁伟,邓德安,MURAKAWA H. 铝合金薄板固有变形逆解析方法的研究和开发[J]. 中国有色金属学报,2015,25(11):3011-3018. LIANG Wei,DENG Dean,MURAKAW H. Investigation and development of inverse analysis method to estimate inherent deformation of Al-alloy thin-plate joint the concept of the inherent strain and the application in ship industry[J]. The Chinese Journal of Nonferrous Metals,2015,25(11):3011-3018.
[7] 梁伟,龚毅,村川英一. 薄板搭接接头固有变形逆解析方法的开发[J]. 焊接学报,2014,35(1):75-78. LIANG Wei,GONG Yi,MURAKAWA H. An inverse analysis method to estimate inherent deformation in lap welded joints[J]. Transactions of the China Welding Institution,2014,35(1):75-78.
[8] KIM Y,LEE J,SAWADA M,et al. Measurement and numerical simulation of welding distortion generated by butt welding[J]. Japan Welding Society,2005,77(1):300-301.
[9] 蔡志鹏,鹿安理,施光凯,等. 焊接变形实时测量系统的建立与应用[J]. 机械工程学报,2001,37(2):62-65. CAI Zhipeng,LU Anli,SHI Guangkai,et al. Establishment and application of a welding real time displacement surveying system[J]. Journal of Mechanical Engineering,2001,37(2):62-65.
[10] 梁伟,夏洋,冯伟,等. 焊接变形的高精度测量方法及预测方法研究[J]. 机械工程学报,2016,52(16):65-70. LIANG Wei,XIA Yang,FENG Wei,et al. Investigations on high-precision methods to measure and predict welding deformation[J]. Journal of Mechanical Engineering,2016,52(16):65-70.
[11] 李玲. 焊接变形光学测量技术研究[J]. 光学技术,2010,36(6):825-828. LI Ling. Study on the rapid three-dimension optical measurement for welding deformation of sheet structures[J]. Optical Technique,2010,36(6):825-828.
[12] 梁伟,郭科峰,龚毅,等. 考虑铝合金接头软化的焊接变形及残余应力预测方法研究[J]. 焊接学报,2017,38(5):58-62. LIANG Wei,GUO Kefeng,GONG Yi,et al. High precision prediction method of residual stress and Welding distortion of aluminum alloy sheet[J]. Transactions of the China Welding Institution,2017,38(5):58-62.
[13] 叶延洪,何静,蔡建鹏,等. 6061-T651铝合金薄板接头的焊接变形[J]. 中国有色金属学报,2014(10):2435-2442. YE Yanhong,HE Jing,CAI Jianpeng,et al. Investigation on mechanism of out-of-plane deformation in thin-plate Al alloy joints induced by arc welding[J]. The Chinese Journal of Nonferrous Metals,2014(10):2435-2442.
[14] LIANG Wei,MURAKAWA H,DENG Dean. Investigation of welding residual stress distribution in a thick-plate joint with an emphasis on the features near weld end-start[J]. Materials and Design,2015,67:303-312.
[15] LIANG Wei,DENG Dean. Influences of heat input,welding sequence and external restraint on twisting distortion in an asymmetrical curved stiffened panel[J]. Advances in Engineering Software,2018,115:439-451.
[16] DENG Dean,ZHOU Yijun,BI Tao,et al. Experimental and numerical investigations of welding distortion induced by CO₂ gas arc welding in thin-plate bead-on joints[J]. Materials & Design,2013,52:720-729.

基于切断技术的固有变形获取方法研究

Method to Obtain Inherent Deformation of Welded Joint Based on the Cutting Technique

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

本文评价

[1]	梁归慧, 谢锋, 韩世伟, 骆文泽, 邓德安. 1 500 MPa级超高强钢复杂薄壁结构焊接变形预测[J]. 机械工程学报, 2023, 59(24): 95-107.
[2]	王超, 吴春彪, 邵龙潭. 焊接变形预测中基于假定热应变法的弹性有限元建模[J]. 机械工程学报, 2022, 58(4): 111-119.
[3]	梁伟, 郑颖, 邓德安. 外拘束对铝合金薄板结构焊接变形的影响[J]. 机械工程学报, 2021, 57(6): 70-77.
[4]	王金强, 程筱胜, 戴宁, 李大伟, 周鑫, 唐云龙. 正面光聚合实现平面到曲面的可编程形状变形[J]. 机械工程学报, 2019, 55(13): 175-184,194.
[5]	梁伟, 夏洋, 冯伟, 村川英一. 焊接变形的高精度测量方法及预测方法研究^*[J]. 机械工程学报, 2016, 52(16): 65-70.