[1] 梁伟,龚毅,村川英一. 薄板搭接接头固有变形逆解析方法的开发[J]. 焊接学报,2014,35(1):75-78. LIANG Wei,GONG Yi,MURAKAWA H. An inverse analysis method to estimate inherent deformation in lap welded joints[J]. Transactions of the China Welding Institution,2014,35(1):75-78. [2] DENG D,MURAKAWA H. Prediction of welding distortion and residual stress in a thin plate butt-welded joint[J]. Computational Materials Science,2008,43(2):353-365. [3] DENG D,MURAKAWA H,LIANG W. Numerical simulation of welding distortion in large structures[J]. Computer Methods in Applied Mechanics and Engineering,2007,196(45-48):4613-4627. [4] DENG D,LIANG W,MURAKAWA H. Determination of welding deformation in fillet-welded joint by means of numerical simulation and comparison with experimental measurements[J]. Journal of Materials Processing Technology,2007,183(2-3):219-225.[5] MURAKAWA H,DENG D,NINSHU Ma,et al. Applications of inherent strain and interface element to simulation of welding deformation in thin plate structures[J]. Computational Materials Science,2012,51(1):43-52. [6] UEDA Y,MURAKAWA H,NINSHU Ma. Welding deformation and residual stress prevention[M]. Amsterdam:Elsevier,2012. [7] LIANG W,HU Xing,ZHENG Ying,et al. Determining inherent deformations of HSLA steel T-joint under structural constraint by means of thermal elastic plastic FEM[J]. Thin-Walled Structures,2020,147:106568. [8] LIANG W,DENG D. Influences of heat input,welding sequence and external restraint on twisting distortion in an asymmetrical curved stiffened panel[J]. Advances in Engineering Software,2018,115:439-451. [9] 梁伟,邓德安,MURAKAWA H. 铝合金薄板固有变形逆解析方法的研究与开发[J]. 中国有色金属学报,2015,25(11):3011-3018. LIANG Wei,DENG Dean,MURAKAWA H. Investigation and development of inverse analysis method to estimate inherent deformation of Al-alloy thin-plate joint[J]. The Chinese Journal of Nonferrous Metals,2015,25(11):3011-3018. [10] 叶延洪,何静,蔡建鹏,等. 6061-T651铝合金薄板接头的焊接变形[J]. 中国有色金属学报,2014,24(10):2435-2442. YEI Yanhong,HE Jing,CAI Jianpeng,et al. Welding deformations of 6061-T651 Al alloy thin-plate joints[J]. The Chinese Journal of Nonferrous Metals,2014,24(10):2435-2442. [11] DENG D,MURAKAWA H. FEM prediction of buckling distortion induced by welding in thin plate panel structures[J]. Computational Materials Science,2008,43(4):591-607. [12] 刘剑桥,李滋亮,任森栋,等. 外部拘束条件下Q345钢单道堆焊接头面外变形机理的探讨[J]. 机械工程学报,2018,54(14):90-97. LIU Jianqiao,LI Ziliang,REN Shendong,et al. Investigating the mechanism of out-of-plane deformation in Q345 steel single-pass bead-on welded joint with external restraint[J]. Journal of Mechanical Engineering,2018,54(14):90-97. [13] 胡兴,戴培元,张超华,等. 合并焊道法对SUS304不锈钢平板对接接头焊接残余应力计算精度和效率的影响[J]. 机械工程学报,2019,55(12):72-82. HU Xing,DAI Peiyuan,ZHANG Chaohua,et al. Influence of lumped-pass method on calculation accuracy and efficiency of welding residual stress in SUS304 stainless steel butt joints[J]. Journal of Mechanical Engineering,2019,55(12):72-82. [14] 王勖成. 有限单元法[M]. 北京:清华大学出版社,2003. WANG Xucheng. Finite element method[M]. Beijing:Tsinghua University Press,2003. |