永磁变刚度柔性关节的力学分析与控制器设计

doi:10.3901/JME.2019.05.089

机械工程学报 ›› 2019, Vol. 55 ›› Issue (5): 89-96.doi: 10.3901/JME.2019.05.089

永磁变刚度柔性关节的力学分析与控制器设计

张明¹, 房立金², 孙凤³, 岡宏一⁴

1. 东北大学机械工程与自动化学院沈阳 110819;
2. 东北大学机器人科学与工程学院沈阳 110169;
3. 沈阳工业大学机械工程学院沈阳 110819;
4. 高知工科大学智能机械系统工学科高知 782-8502 日本

收稿日期:2018-03-28 修回日期:2018-10-21 出版日期:2019-03-05 发布日期:2019-03-05
通讯作者: 房立金(通信作者),男,1965年出生,博士,教授,博士研究生导师。主要研究方向为机器人及自动化控制。E-mail:ljfang@mail.neu.edu.cn
作者简介:张明,男,1988年出生,博士研究生。主要研究方向为柔性机器人技术与磁悬浮技术。E-mail:zm201234@hotmail.com;孙凤,男,1978年出生,博士,教授,博士研究生导师。主要研究方向为磁悬浮技术与数控技术。E-mail:sunfeng@sut.edu.cn;岡宏一,男,1958年出生,教授,博士研究生导师。主要研究方向为磁悬浮技术与机器人技术。E-mail:oka.koichi@kochi-tech.ae.jp
基金资助:
国家自然科学基金（51575092，51105257）和国家重点研发计划重点专项（2017YFB1300900）资助项目。

Mechanical Analysis and Controller Design of the Permanent Magnetic Variable Stiffness Flexible Joint

ZHANG Ming¹, FANG Lijin², SUN Feng³, OKA Koichi⁴

1. School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819;
2. Faculty of Robot Science and Engineering, Northeastern University, Shenyang 110169;
3. School of Mechanical Engineering, Shenyang University of Technology, Shenyang 110870;
4. Department of Intelligent Mechanical System Engineering, Kochi University of Technology, Kochi 782-8502, Japan

Received:2018-03-28 Revised:2018-10-21 Online:2019-03-05 Published:2019-03-05

摘要/Abstract

摘要： 提出一种采用永磁弹簧、绳索驱动、梯形布置的拮抗式变刚度柔性机器人关节，能够根据任务需要，实时调节关节刚度。所述永磁弹簧装置，在绳索提供力矩一定的情况下，增加了关节刚度变化范围，同时减小操作臂的质量与惯量。对提高柔性机器人关节的运动性能具有重要意义。对关节空间与绳索空间的映射关系进行推导并利用雅可比矩阵和模型间静力学关系，得到关节刚度模型，进而实现关节刚度与位置解耦。以轨迹控制为目标，设计了一种双闭环解耦控制器，并进行了试验验证。仿真分析与试验结果共同表明，该柔性关节在较宽刚度调整范围内，都具有较好的位置响应特性和轨迹跟踪能力。上述结构与控制方式同样也适用于多自由度并联柔性机器人关节。

关键词: 变刚度, 解耦控制, 绳索驱动, 永磁弹簧

Abstract: An antagonistic variable stiffness flexible robot joint with magnetic spring, wire-driven and trapezoidal arrangement is proposed, which can adjust the joint stiffness in real time according to the task requirements. The magnetic spring device increases the variable stiffness range of the joint, without increasing the wire tension, while reducing the weight and inertia of the operating arm. It is of great significance to improve the joint performance. The relationship between the joint space and wire space is promoted and Jacobi matrix and static relationship between the models are used to obtain the joint stiffness model, which realize the decoupling of stiffness and position. Based on trajectory control, a double closed-loop decoupling controller is designed, then do experimental verification. The simulation and experimental results show that the joint has good position response and trajectory tracking ability within a wide stiffness range. This configuration and control method is also suitable for multi-degree of freedom parallel joints.

Key words: decoupling control, permanent magnet spring, variable-stiffness, wire-driven

中图分类号:

TH39
TH135

张明, 房立金, 孙凤, 岡宏一. 永磁变刚度柔性关节的力学分析与控制器设计[J]. 机械工程学报, 2019, 55(5): 89-96.

ZHANG Ming, FANG Lijin, SUN Feng, OKA Koichi. Mechanical Analysis and Controller Design of the Permanent Magnetic Variable Stiffness Flexible Joint[J]. Journal of Mechanical Engineering, 2019, 55(5): 89-96.

参考文献

[1] THOMAS R K,WESLEY L S. Robotics and automation handbook[M]. New York:CRC Press,2005.
[2] ALBU-SCHAFFER A,OTT C,HIRZINGER G. A unified passivity-based control framework for position,torque,impedance control of flexible joint robots[J]. The International Journal of Robotics Research,2007,26(1):23-39.
[3] WANG W,FU X Y,LI Y G,et al. Design of variable stiffness based on modified gear-rack mechanism,Journal of Mechanisms and Robotics[J]. 2016,8(6):061008.
[4] PAINE N,MEHLING J S,HOLLEY J,et al. Actuator control for the NASA-JSC Valkyrie humanoid robot:A decoupled dynamics approach for torque control of series elastic robots[J]. Journal of Field Robotics,2015,32(3):378-396.
[5] KIM B,SONG J,PARK J. A serial-type dual actuator unit with planetary gear train:Basic design and application[J]. IEEE/ASME Transactions on Mechatronics,2010,15(1):108-116.
[6] 王伟,刘立冬,魏来,等. 柔性齿条式变刚度关节驱动器设计与研究[J]. 机械工程学报,2016,52(1):26-32. WANG Wei,LIU Lidong,WEI Lai,et al. Design and research of rack-based variable stiffness actuator[J]. Journal of Mechanical Engineering,2016,52(1):26-32.
[7] KIM B S,SONG J B. Hybrid dual actuator unit:A design of a variable stiffness actuator based on an adjustable moment arm mechanism[C]//International Conference on Robotics and Automation,2010,Anchorage,AK,USA. IEEE,2010:1655-1660.
[8] AMIR J,NIKOS G T,DARWIN G C. A novel intrinsically energy efficient actuator with adjustable stiffness[J]. IEEE//ASME Transactions on Mechatronics,2013,18(1):355-365.
[9] CHOI J,HONG S,LEE W,et al. A robot joint with variable stiffness using leaf springs[J]. IEEE Transactions on Robotics,2011,27(2):229-238.
[10] NAM K H,KIM B S,SONG J B. Compliant actuation of paralleltype variable stiffness actuator based on antagonistic actuation[J]. Journal of Mechanical Science and Technology,2010,24(11):2315-2321.
[11] FRIEDL W,CHALON M,REINECKE J,et al. FAS a flexible antagonistic spring element for a high performance over actuated hand[C]//IEEE/RSJ International Conference on Intelligent Robots and Systems,2011,Piscataway,USA. IEEE,2011:1366-1372.
[12] OSADA M,ITO N,NAKANISHI Y,et al. Realization of flexible motion by musculoskeletal humanoid "Kojiro" with add-on nonlinear spring units[C]//IEEE/RAS International Conference on Humanoid Robots,2010,Piscataway,USA. IEEE,2010:378-383.
[13] NAKANISHI Y,ITO N,SHIRAI T,et al. Design of powerful and flexible musculoskeletal arm by using nonlinear spring unit and electromagnetic clutch opening mechanism[C]//IEEE/RAS International Conference on Humanoid Robots,2011,Piscataway,USA. IEEE,2011:377-382.
[14] TAO Y,WANG T M,WANG Y Q,et al. A new variable stiffness roboti joint[J]. Industrial Robot:An international Journal,2015,42(4):371-378.
[15] 张明,房立金,孙凤,等. 永磁变刚度机构柔性机器人力学特性研究[J]. 农业机械学报,2018(1):414-420. ZHANG Ming,FANG Lijin,SUN Feng,et al. Study on mechanical characteristics of variable-stiffness permanent magnetic mechanism for elastic robots[J]. Transactions of the Chinese Society for Agricultural Machinery,2018(1):414-420.
[16] SUN F,ZHANG M. Mechanical analysis of a three-degree of same-stiffness permanent magnetic spring[J]. International Journal of Applied Electromagnetic and Mechanics,2016,52:667-675.
[17] 史延雷,张小俊,张明路. 主-被动复合变刚度柔性关节设计与分析[J]. 机械工程学报,2018,54(3):55-62. SHI Yanlei,ZHANG Xiaojun,ZHANG Minglu. Design and analysis of a active-passive variable stiffness flexible joint[J]. Journal of Mechanical Engineering,2018,54(3):55-62.
[18] 隋春平,赵明杨. 3自由度并联柔索驱动变刚度操作臂的刚度控制[J]. 机械工程学报,2006,42(6):205-210. SUI Chunping,ZHAO Mingyang. Statics and stiffness study on a 3-DOF parallel wire driven flexible manipulator[J]. Chinese Journal of Mechanical Engineering,2006,42(6):205-210.

永磁变刚度柔性关节的力学分析与控制器设计

Mechanical Analysis and Controller Design of the Permanent Magnetic Variable Stiffness Flexible Joint

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王琥, 李启迪, 李光耀. 变刚度复合材料结构设计方法及不确定性分析研究进展[J]. 机械工程学报, 2019, 55(8): 46-55.
[2]	史延雷, 张小俊, 张明路. 主-被动复合变刚度柔性关节设计与分析[J]. 机械工程学报, 2018, 54(3): 55-62.
[3]	党堃原, 杨丽曼, 李运华, 司国雷, 陈君辉, 王文杰, 刘宇辉, 权龙, 赵斌. 基于气隙组合永磁弹簧的直动式溢流阀优化设计[J]. 机械工程学报, 2018, 54(20): 297-303.
[4]	杨柳, 杨绍普, 王久健, 刘永强. 机车转子系统的非线性动力学分析[J]. 机械工程学报, 2018, 54(18): 97-104.
[5]	张国凯, 马家耀, 尚祖峰, 陈焱, 由衷, 易波, 王树新. 具有折展与变刚度特征的NOTES手术器械臂[J]. 机械工程学报, 2018, 54(17): 28-35.
[6]	闫继宏, 石培沛, 张新彬, 赵杰. 软体机械臂仿生机理、驱动及建模控制研究发展综述[J]. 机械工程学报, 2018, 54(15): 1-14.
[7]	姚红良, 王重阳, 陈子冬, 闻邦椿. 转子系统永磁变刚度抑振及吸振研究^*[J]. 机械工程学报, 2017, 53(9): 66-72.
[8]	张利鹏, 李亮, 祁炳楠. 轮毂电机驱动电动汽车侧倾稳定性解耦控制[J]. 机械工程学报, 2017, 53(16): 94-104.
[9]	王田苗, 郝雨飞, 杨兴帮, 文力. 软体机器人：结构、驱动、传感与控制[J]. 机械工程学报, 2017, 53(13): 1-13.
[10]	宁欣, 韩邦成, 房建成. 基于干扰观测器的双框架变速率控制力矩陀螺解耦控制[J]. 机械工程学报, 2017, 53(10): 52-59.
[11]	王伟, 刘立冬, 魏来, 刘斐, 贠超. 柔性齿条式变刚度关节驱动器设计与研究[J]. 机械工程学报, 2016, 52(1): 26-33.
[12]	陈炜楠, 刘冠峰, 林协源, 张国英, 管贻生. 平面2自由度并联机器人的解耦控制和仿真分析[J]. 机械工程学报, 2015, 51(13): 152-157.
[13]	曹宏瑞;李亚敏;何正嘉;朱永生. 高速滚动轴承-转子系统时变轴承刚度及振动响应分析[J]. , 2014, 50(15): 73-81.
[14]	欧阳波;尚伟伟. 6自由度绳索驱动并联机器人力封闭工作空间的快速求解方法[J]. , 2013, 49(15): 34-41.
[15]	肖正明;秦大同;尹志宏. 多级行星齿轮系统耦合动力学分析与试验研究[J]. , 2012, 48(23): 51-58.