[1] URBIKAIN G,FERNANDEZ A,LOPEZ L,et al. Stability lobes for general turning operations with slender tools in the tangential direction[J]. International Journal of Machine Tools & Manufacture,2013,67:35-44.
[2] 石莉,陈尔涛,姜增辉. 正交车铣铝合金薄壁回转体振动信号的试验分析[J]. 兵工学报,2009,30(3):356-360. SHI Li,CHEN Ertao,JIANG Zenghui. Test analysis on vibration signal of thin aluminium-alloy cylinder machined with orthogonal turn-milling[J]. Acta Armamentarii,2009,30(3):356-360.
[3] ALWARAAMY T,SANGEETHA N,NAVANEETHAN S. Stability and vibration signal analysis in hard turning[C]//The Fifth International Conference on Vibration Engineering and Technology of Machinery. Wuhan:Huazhong University of Science and Technology,2009:27-28.
[4] OZLU E,BUDAK E. Analytical Modeling of chatter stability in turning and boring operations-Part Ⅱ:Experimental verification[J]. Journal of Manufacturing Science and Engineering,2007,129:733-739.
[5] SUH C,KHURJEKAR P,YANG B. Characterisation and identification of dynamic instability in milling operation[J]. Mechanical Systems and Signal Processing,2002,16(5):853-872.
[6] BRECHER C,HERMES R,EPPLE A,et al. Simulative parameterization of dead time variable rotation speed behavior to improve process stability in high performance cutting[J]. Procedia CIRP,2012,4:2-10.
[7] SCHMITZ T L,SMITH K S. Machining dynamics - frequency response to improved productivity[M]. New York:Springer Science,2009.
[8] ALTINTAS Y. Manufacturing automation:Principles of metal cutting and machine tool vibrations[M]. Cambridge:Cambridge University Press,2000.
[9] HAMED M,FIROOZ B N,MOHAMMAD R M. Nonlinear behaviour of the regenerative chatter in turning process with a worn tool:Forced oscillation and stability analysis[J]. Mechanism and Machine Theory,2010,45:1050-1066.
[10] ARMAREGO E A,KATTA R K. Predictive cutting model for forces and power in self-propelled roatary tool turning operations[J]. Annals of the ClRP,1997,46(1):19-24.
[11] ENDRES W J,SUTHERLAND J W,DEVOR R E. A dynamic model of the cutting force system in the turning process[J]. International Journal of Machine Tools and Manufacture,2003,43:1163-1170.
[12] 郭瑞琴,武帅,李中. 外圆车削加工过程中再生型颤振的建模与分析[J],中国工程机械学报,2015,13(3),252-257. GUO Ruiqin,WU Shuai,LI Zhong. Modeling and analysis on regenerative fluttering for cylindrical turning[J]. Chinese Journal of Construction Machinery,2015,13(3):252-257.
[13] 李勤良,汪博,赵斌,等. 考虑非线性迟滞力的机床颤振系统稳定性研究[J].机械工程学报,2013,49(11):43-49. LI Qinliang,WANG Bo,ZHAO Bin,et al. Research on the chatter stability of machine system taking the nonlinear hysteretic force into consideration[J]. Journal of Mechanical Engineering,2013,49(11):43-49.
[14] CHIGBOGU G. OZOEGVU,SAM N. O. Time domain chatter stability comparison of turning and milling processes[J]. International Journal of Multidisciplinary Sciences and Engineering,2012,3(11):25-30.
[15] ANDREAS O,GUNTER R. Application of spindle speed variation for chatter suppression in turning[J]. CIRP Journal of Manufacturing Science and Technology,20136:102-109.
[16] 蔡力钢,孙光辉,刘志峰,等. 动态激励下多参数对不落轮轮对车削稳定性的影响[J],北京工业大学学报,2016,42(8):1121-1128. CAI Ligang,SUN Guanghui,LIU Zhifeng,et al. Influence of multiparameter with dynamic excitation on turning stability for underfloor wheelsets[J]. Journal of Beijing University of Technology,2016,42(8):1121-1128.
[17] KAMBIZ H H,HAMED M,GHOLAMREZA V,et al. Spindle speed variation and adaptive force regulation to suppress regenerative chatter in the turning process[J]. Journal of Manufacturing Processes,2010,12,106-115.
[18] 谭方浩,焦黎,王西彬,等. 基于B样条曲线建模预测复杂型面动态车削力[J],计算机集成制造系统,2014,20(12):3048-3057. TAN Fanghao,JIAO Li,WANG Xibin,et al. Dynamic force prediction model in complex surface turing based on B-spline curves[J]. Computer Integrated Manufacturing Systems,2014,20(12):3048-3057.
[19] FENG P F,YU D W,WU Z J. Jaw-chuck stiffness and its influence on dynamic clamping force during high-speed turning[J]. International Journal of Machine Tools & Manufacture,2008,48:1268-1275. |