[1] 许巍,卢天健. 柔性电子系统及其力学性能[J]. 力学进展,2008(2):137-150. XU Wei,LU Tianjian. Flexible electronics system and their mechanical properties[J]. Advances in Mechanics,2008(2):137-150.
[2] 冯雪,陆炳卫,吴坚,等. 可延展柔性无机微纳电子器件原理与研究进展[J]. 物理学报,2014(1):9-26. FENG Xue,LU Bingwei,WU Jian,et al. Review on stretchable and flexible inorganic electronics[J]. Acta Physica Sinica,2014(1):9-26.
[3] 张乃柏,郭秋泉,杨军. 数字打印柔性电子器件的研究进展[J]. 中国科学:物理学力学天文学,2016,46(4):75-90. ZHANG Naibo,GUO Qiuquan,YANG Jun. The development of digital printing technologies for flexible electronics devices[J]. SCIENTIA SINICA Physica,Mechanica & Astronomica,2016,46(4):75-90.
[4] SONG J,FENG X,HUANG Y. Mechanics and thermal management of stretchable inorganic electronics[J]. National Science Review,2016,3(1):128-143.
[5] KIM D H,AHN J H,CHOI W M,et al. Stretchable and foldable silicon integrated circuits[J]. Science,2008,320(5875):507-511.
[6] XU S,ZHANG Y,CHO J,et al. Stretchable batteries with self-similar serpentine interconnects and integrated wireless recharging systems[J]. Nature Communications,2013,4:1543.
[7] TRIPATHI A K,SMITS E C P,van der PUTTEN J,et al. Low-voltage gallium-indium-zinc-oxide thin film transistors based logic circuits on thin plastic foil:Building blocks for radio frequency identification application[J]. Applied Physics Letters,2011,98(16):488.
[8] KO H,STOYKOVICH M,SONG J,et al. A hemispherical electronic eye camera based on compressible silicon optoelectronics[J]. Nature,2008,454(7205):748-753.
[9] PARK S,XIONG Y,KIM R,et al. Printed assemblies of inorganic light-emitting diodes for deformable and semitransparent displays[J]. Science,2009,325(5943):977-981.
[10] KIM D,VIVENTI J,AMSDEN J,et al. Dissolvable films of silk fibroin for ultrathin conformal bio-integrated electronics[J]. Nature Materials,2010,9(6):511-517.
[11] KIM D,LU N,GHAFFARI R,et al. Materials for multifunctional balloon catheters with capabilities in cardiac electrophysiological mapping and ablation therapy[J]. Nature Materials,2011,10(4):316-323.
[12] 李银华,刘平,田保红,等. 集成电路用铜基引线框架材料的发展与展望[J]. 材料导报,2007(7):24-26,47. LI Yinhua,LIU Ping,TIAN Baohong,et al. Development and expectation of copper-based lead frame material used in intergrated circuit[J]. Materials Review,2007(7):24-26,47.
[13] 叶方,高雪松,周琴. 集成电路塑封中引线框架使用要求[J]. 电子与封装,2003(2):26-29. YE Fang,GAO Xuesong,ZHOU Qin. Application requirements for lead frame used for IC plastic encapsulation[J]. Electronics & Packaging,2003(2):26-29.
[14] 罗斌,夏华翅,陈花玲,等. 离子凝胶材料的三维打印工艺[J]. 机械工程学报,2018,54(17):157-164. LUO Bin,XIA Huachi,CHEN Hualing,et al. Research on 3D printing process of ionic gel[J]. Journal of Mechanical Engineering,2018,54(17):157-164.
[15] SAARI M,COX B,RICHER E,et al. Fiber encapsulation additive manufacturing:An enabling technology for 3D printing of electromechanical devices and robotic components[J]. 3d Printing and Additive Manufacturing,2015,2(1):32-39.
[16] COX B,SAARI M,XIA B,et al. Fiber encapsulation additive manufacturing:Technology and applications update[J]. 3d Printing and Additive Manufacturing,2017,4(2):116-119.
[17] MACDONALD E,WICHER R. Multiprocess 3D printing for increasing component functionality[J]. Science,2016,353(6307):8. |