[1] 张立玲,高峰. 金属薄壁吸能结构耐撞性研究进展[J]. 机械工人:热加工,2006(1):76-78. ZHANG Liling,GAO Feng. Crashworthiness research progress of thin-walled energy-absorbing metal structures[J]. Mechanical Workers:Hot Working,2006(1):76-78.
[2] WIERZBICKI T,ABRAMOWICZ W. On the crushing mechanics of thin-walled structures[J]. Journal of Applied Mechanics,1983,50(4):727-734.
[3] ABRAMOWICZ W,JONES N. Dynamic progressive buckling of circular and square tubes[J]. International Journal of Impact Engineering,1986,4(4):243-270.
[4] GUILLOW S R,LU G,GRZEBIETA R H. Quasi-static axial compression of thin-walled circular aluminium tubes[J]. International Journal of Mechanical Sciences,2001,43(9):2103-2123.
[5] CHEN W,WIERZBICKI T. Relative merits of single-cell,multi-cell and foam-filled thin-walled structures in energy absorption[J]. Thin-Walled Structures,2001,39(4):287-306.
[6] ZHANG Xiong,CHENG Gengdong,ZHANG Hui. Theoretical prediction and numerical simulation of multi-cell square thin-walled structures[J]. Thin-Walled Structures,2006,44:1185-1191.
[7] JUSUF A,DIRGANTARA T,GUNAWAN L,et al. Crashworthiness analysis of multi-cell prismatic structures[J]. International Journal of Impact Engineering,2015,78(78):34-50.
[8] WANG Zhonggang,LIU Jiefu,YAO Song. On folding mechanics of multi-cell thin-walled square tubes[J]. Composites Part B:Engineering,2018,132(1):17-27.
[9] WU Suzhen,ZHENG Gang,SUN Guangyong,et al. On design of multi-cell thin-wall structures for crash worthiness[J]. International Journal of Impact Engineering,2016,88:102-117.
[10] WIERZBICKI T,JONES N. Structural failure[M]. Hoboken:Wiley,1989.
[11] NIA A A,PARSAPOUR M. An investigation on the energy absorption characteristics of multi-cell square tubes[J]. Thin-Walled Structures,2013,68(10):26-34.
[12] 文桂林,孔祥正. 泡沫填充夹芯墙多胞结构的耐撞性多目标优化设计[J]. 振动与冲击,2015,34(24105):115-121. WEN Guilin,KONG Xiangzheng,et al. Multi-objective crashworthiness optimization design of foam-filled sandwich wall multi-cell structures[J]. Journal of Vibration and Shock,2015,34(24105):115-121.
[13] 张勇,刘舒然,赖雄鸣,等. 泡沫填充薄壁结构的抗弯性分析及多目标优化设计[J]. 机械工程学报,2016,52(24):115-122. ZHANG Yong,LIU Shuran,LAI Xiongming,et al. Bending resistance analysis and multi-objective optimization design of foam filled thin-walled structure[J]. Journal of Mechanical Engineering,2016,52(24):115-122.
[14] 兰凤崇,马聪承,陈吉清,等. 泡沫铝填充分体式翻转结构设计与优化分析[J]. 机械工程学报,2017,53(12):156-165. LAN Fengchong,MA Congcheng,CHEN Jiqing,YU Jianli,et al. Structural design optimization of split typed flip tubes filled with aluminum foam[J]. Journal of Mechanical Engineering,2017,53(12):156-165.
[15] NHAN T T. Theoretical prediction and optimization for crashworthiness of multi-cell tubes under impact loading[D]. Changsha:Hunan University,2015.
[16] QIU Na,GAO Yunkai,FANG Jiangguang,et al. Theoretical prediction and optimization of multi-cell hexagonal tubes under axial crashing[J]. Thin-Walled Structures,2016,102:111-121.
[17] ZHANG Xiong,ZHANG Hui. Energy absorption of multi-cell stub columns under axial compression[J]. Thin-Walled Structures,2013,68(10):156-163.
[18] ZHANG Xiong,ZHANG Hui. Numerical and theoretical studies on energy absorption of three-panel angle elements[J]. International Journal of Impact Engineering,2012,46(6):23-40.
[19] HE Qiang,MA Dawei,ZHANG Zhedong,et al. Mean compressive stress constitutive equation and crashworthiness optimization design of three novel honeycombs under axial compression[J]. International Journal of Mechanical Sciences,2015,99:274-287. |