超亲水-疏水组合竖直表面强化蒸汽冷凝传热

doi:10.3901/JME.2018.10.182

机械工程学报 ›› 2018, Vol. 54 ›› Issue (10): 182-187.doi: 10.3901/JME.2018.10.182

• 可再生能源与工程热物理 • 上一篇下一篇

扫码分享

超亲水-疏水组合竖直表面强化蒸汽冷凝传热

周冬冬, 纪献兵, 代超, 徐进良

华北电力大学低品位能源多相流与传热北京市重点实验室北京 102206

收稿日期:2017-06-05 修回日期:2017-11-10 出版日期:2018-05-20 发布日期:2018-05-20
通讯作者: 纪献兵(通信作者),男,1971年出生,博士,副教授,硕士研究生导师。主要研究方向为新能源利用中工程热物理问题、多相流与强化传热、电子器件冷却等。E-mail:jxb@ncepu.edu.cn
作者简介:周冬冬,男,1991年出生。主要研究方向为多尺度相变冷凝传热。E-mail:zdd@ncepu.edu.cn
基金资助:
国家自然科学基金（51676071）和国家自然科学基金重点（51436004）资助项目。

Steam Condensation Heat Transfer Enhancement on Superhydrophilic-Hydrophobic Hybrid Vertical Surface

ZHOU Dongdong, JI Xianbing, DAI Chao, XU Jinliang

The Beijing Key Lab. of Multiphase Flow and Heat Transfer, North China Electric Power University, Beijing 102206

Received:2017-06-05 Revised:2017-11-10 Online:2018-05-20 Published:2018-05-20

摘要/Abstract

摘要： 为了强化蒸汽冷凝传热，设计超亲水-疏水组合表面，研究了超亲水网格线间距、壁面过冷度等参数对蒸汽冷凝传热的影响。组合表面上超亲水网格线之间间距分别为1.5 mm、2.5 mm、3.5 mm，并将组合表面的传热性能与光滑表面和疏水表面进行了对比，同时使用高速摄影仪对组合表面蒸汽冷凝过程进行了可视化。研究发现，超亲水-疏水组合表面可以较好地调控冷凝液滴大小，其冷凝传热性能要优于光滑表面和疏水表面。在△T=4.3 K时，2.5 mm间距组合表面的传热系数分别是光滑表面和疏水表面的2.2倍和1.6倍。而在三个超亲水网格线间距的组合表面中，网格间距为2.5 mm的组合表面传热性能最佳。在△T=9.0 K时，2.5 mm间距组合表面的传热系数分别是1.5 mm间距组合表面和3.5 mm间距组合表面传热系数的1.2倍和1.8倍。

关键词: 超亲水, 冷凝传热, 疏水, 组合表面

Abstract: To strengthen steam condensation heat transfer, superhydrophilic-hydrophobic hybrid surface is designed. The effects of parameters such as superhydrophilic grid line spacing and wall undercooling on steam condensation heat transfer are studied and superhydrophilic grid line spacing on hybrid surface is 1.5 mm, 2.5 mm and 3.5 mm respectively. The heat transfer performance of hybrid surface compares with smooth surface and hydrophobic surface, and the process of hybrid surface steam condensation is visualized using a high-speed camera. It is found that superhydrophilic-hydrophobic hybrid surface can better regulate the condensate droplet size, and its condensation heat transfer performance is better than that of smooth surface and hydrophobic surface. At △T=4.3 K, the heat transfer coefficient of the 2.5 mm grid spacing hybrid surface is 2.2 times and 1.6 times of the smooth surface and hydrophobic surface respectively. In the three superhydrophilic grid line spacings hybrid surface, the heat transfer performance of 2.5 mm grid spacing hybrid surface is overall best, and at △T=9.0 K, the heat transfer coefficient of the 2.5 mm grid spacing hybrid surface is 1.2 times and 1.8 times of 1.5 mm grid spacing hybrid surface and 3.5 mm grid spacing hybrid surface, respectively.

Key words: condensation heat transfer, hybrid surface, hydrophobic, superhydrophilic

中图分类号:

TG156

周冬冬, 纪献兵, 代超, 徐进良. 超亲水-疏水组合竖直表面强化蒸汽冷凝传热[J]. 机械工程学报, 2018, 54(10): 182-187.

ZHOU Dongdong, JI Xianbing, DAI Chao, XU Jinliang. Steam Condensation Heat Transfer Enhancement on Superhydrophilic-Hydrophobic Hybrid Vertical Surface[J]. Journal of Mechanical Engineering, 2018, 54(10): 182-187.

导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks

链接本文: http://www.cjmenet.com.cn/CN/10.3901/JME.2018.10.182

http://www.cjmenet.com.cn/CN/Y2018/V54/I10/182

参考文献

[1] PAREKH S, FARIDB M M, SELMANA J R, et al. Solar desalination with a humidification-dehumidification technique-a comprehensive technical review[J]. Desalination, 2004, 160:167-186.
[2] 徐敬华, 张树有, 谭建荣. 大型空分板翅换热器性能强化的逐流段设计方法[J]. 机械工程学报, 2015, 51(9):129-136. XU Jinghua, ZHANG Shuyou, TAN Jianrong. Segmented design of performance enhancement for large Plate fin heat exchanger of cryogenic air separation unit[J]. Journal of Mechanical Engineering, 2015, 51(9):129-136.
[3] WATANABE N, ARITOMI M, MACHIDA A. Time- series characteristics and geometric structures of drop-size distribution density in dropwise condensation[J]. International Journal of Heat and Mass Transfer, 2014, 76:467-483.
[4] 马志先, 张吉礼, 孙德兴. 管束效应对HFC245fa与HCFC123膜状凝结换热影响[J]. 机械工程学报, 2012, 48(4):129-135, 145. MA Zhixian, ZHANG Jili, SUN Dexing. Effect of inundation on film condensation of HFC245fa and HCFC123 on horizontal tubes[J]. Journal of Mechanical Engineering, 2012, 48(4):129-135, 145.
[5] 胡灿, 李敏霞, 马一太, 等. 小通道内的冷凝换热模型分析[J]. 机械工程学报, 2012, 48(24):134-140. HU Can, LI Minxia, MA Yitai, et al. Analysis of condensation heat transfer model in small channels[J]. Journal of Mechanical Engineering, 2012, 48(24):134-140.
[6] WANG Buxuan, REN Zepei, HUANG Qili, et al. Experimental study of condensation heat transfer for colling gas flow containing water vapor[J]. Chinese Journal of Mechanical Engineering, 1988, 1(1):13-22.
[7] 宋永吉, 任晓光, 任绍梅, 等. 水蒸气在超疏水表面上的冷凝传热[J]. 工程热物理学报, 2007, 28(1):95-97. SONG Yongji, REN Xiaoguang, REN Shaomei, et al. Condensation heat transfer of steam on super-hydrophobic surfaces[J]. Journal of Engineering Thermophysics, 2007, 28(1):95-97.
[8] 马学虎, 李洪安, 徐敦颀, 等. 超薄聚合物表面上滴状冷凝的传热研究[J]. 高校化学工程学报, 1993, 7(4):309-315. MA Xuehu, LI Hongan, XU Dunxin, et al. A study of dropwise condensation heat transfer on the superthin polymer surface[J]. Journal of Chemical Engineering of Chinese Universities,1993, 7(4):309-315.
[9] KIM H, NAM Y. Condensation behaviors and resulting heat transfer performance of nano-engineered copper surfaces[J]. International Journal of Heat and Mass Transfer, 2016, 93:286-292.
[10] CHU Fuqiang, WU Xiaomin. Fabrication and condensation characteristics of metallic superhydrophobic surface with hierarchical micro-nano structures[J]. Applied Surface Science, 2016, 371:322-328.
[11] VARANASI K K, DENG T. Controlling Nucleation and Growth of Water Using Hybrid Hydrophobic-Hydrophilic Surfaces[C]//14th International Heat Transfer Conference, Washington DC, ASME, 2010:447-452.
[12] DERBY M M, CHATTERJEE A, PELES Y, et al. Flow condensation heat transfer enhancement in a mini-channel with hydrophobic and hydrophilic patterns[J]. International Journal of Heat and Mass Transfer, 2014, 68:151-160.
[13] HU H W, TANG G H, NIU D. Experimental investigation of condensation heat transfer on hybrid wettability finned tube with large amount of noncondensable gas[J]. International Journal of Heat and Mass Transfer, 2015, 85:513-523.
[14] 彭本利, 马学虎, 兰忠, 等. 组合表面调控液滴特性强化蒸汽冷凝传热[J]. 化工学报, 2015, 6(10):3826-3833. PENG Benli, MA Xuehu, LAN Zhong, et al. Steam condensation heat transfer enhancement through droplet properties manipulation with hybrid surfaces[J]. CIESC Journal, 2015, 6(10):3826-3833.
[15] MAHAPATR P S, GHOSH A, GANGULY R, et al. Key design and operating parameters for enhancing dropwise condensation through wettability patterning[J]. International Journal of Heat and Mass Transfer, 2016, 92:877-883.
[16] BERMAN L D. Effect of vapor velocity on heat transfer during condensation[J]. Journal of Applied Mechanics and Technical Physics, 1971, 12(6):946-948.
[17] SIGSBEE R A, POUND G M. Heterogeneous nucleation from the vapor[J]. Advances In Colloid And Interface Science, 1967, 1(3):335-390.
[18] KIM S, KIM K J. Dropwise condensation modeling suitable for superhydrophobic surface[J]. Journal of Heat Transfer, 2011, 133(8):081502-081502-8.

超亲水-疏水组合竖直表面强化蒸汽冷凝传热

Steam Condensation Heat Transfer Enhancement on Superhydrophilic-Hydrophobic Hybrid Vertical Surface

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	章雨, 艾如玉, 高岩. 利用微热压印与光刻蚀硅模在钛合金表面构建耐久超疏水结构[J]. 机械工程学报, 2025, 61(16): 116-128.
[2]	尤天伢, 纪献兵, 郭浩, 甘园园, 苗政. 排液乳突与条纹相结合表面强化蒸汽冷凝传热[J]. 机械工程学报, 2023, 59(24): 156-163.
[3]	陈逢军, 向望, 胡天. 静电气喷磁响应复合微结构功能表面制备研究[J]. 机械工程学报, 2022, 58(9): 298-306.
[4]	王立新, 张硕研, 闫世兴, 董世运. 猪笼草滑移区微纳复合结构液滴浸润程度的数值模拟[J]. 机械工程学报, 2022, 58(3): 203-212.
[5]	张亚锋, 汤程, 董聪慧, 余家欣. 微液滴/超疏水界面作用力在电压下的响应行为研究[J]. 机械工程学报, 2022, 58(17): 240-248.
[6]	顾秦铭, 张朝阳, 周晖, 张凯峰, 徐坤, 朱浩. 激光-电化学沉积制备超疏水铜表面及其Cassie状态稳定性研究[J]. 机械工程学报, 2020, 56(1): 223-232.
[7]	李小磊, 张磊, 马晓雯, 张会臣. 基于微肋板伸缩疏水/超疏水表面设计及其润湿性调控^*[J]. 机械工程学报, 2017, 53(5): 167-174.
[8]	姜桂林, 管宁, 张承武, 刘志刚. 截面形状对疏水性微肋阵内减阻特性的影响^*[J]. 机械工程学报, 2016, 52(22): 153-160.
[9]	宋昊, 刘战强, 史振宇, 蔡玉奎. 沟槽与方柱阵列结构的微铣削和加工表面疏水性^*[J]. 机械工程学报, 2016, 52(21): 206-212.
[10]	连峰, 王增勇, 张会臣. 双疏铝合金表面的水/油润滑摩擦学性能[J]. 机械工程学报, 2016, 52(11): 115-120.
[11]	左志平,廖瑞金,郭超,庄奥运. 玻璃绝缘子超疏水复合涂层的制备及其防冰性能研究[J]. 电气工程学报, 2015, 10(4): 99-105.
[12]	毕可东, 宋小闯, 王玉娟, 杨决宽, 陈云飞. 猪笼草蜡质滑移区表面反粘附特性的研究[J]. 机械工程学报, 2015, 51(23): 103-109.
[13]	李连凯;余丙军;郭剑;钱林茂. 基于摩擦诱导选择性刻蚀原理的单晶硅表面大面积织构加工[J]. , 2014, 50(17): 93-98.
[14]	宋金龙;徐文骥;陆遥;刘新;魏泽飞;孙晶. 电化学和化学加工法制备铝基体超双疏表面[J]. , 2013, 49(5): 182-190.
[15]	倪中华;易红;顾兴中. 载药纳米颗粒与血管支架自装配机理和方法[J]. , 2005, 41(8): 190-194.