随机故障注入结合神经网络法的机电系统可靠性计算方法*

doi:10.3901/JME.2017.06.195

摘要/Abstract

摘要：

将随机故障注入方法与神经网络技术相结合，提出机电系统多失效模式可靠性计算方法。以液压缸内外泄漏故障为事例，将虚拟故障信息注入活塞杆线性定位系统一体化仿真模型中。利用神经网络较强的函数逼近功能，得到关键敏感特征参数与系统状态信号间的显式极限状态方程，将系统的可靠性概率约束转化为一个等价的确定型，避免了机电系统动态响应的多次遍历运算。再结合随机模拟，避开了各失效模式极限状态函数间复杂的相关性讨论。采用正交试验设计方法对机电系统进行参数灵敏度分析并精简样本。基于随机故障注入-神经网络法得到了关键敏感特征参数的改变对机电系统可靠性的影响规律，进而获得了参数的可靠性区间及失效临界值。为机电系统的可靠性分析和设计提供了参考和依据。

关键词: 动态, 多失效模式, 可靠性, 随机故障, 神经网络

Abstract:

Based on the random fault injection combined with artificial neural network (ANN) technology, a reliability calculation method of electromechanical system with correlated failure modes is proposed. The virtual fault information is injected into the piston rod linear positioning system integrated simulation model by taking internal and external leakage of hydraulic cylinder as a typical fault example. By using the strong approximation function of the neural network, the explicit limit state equation between the critical sensitive characteristic parameters and the system state signals is obtained. The reliability probability constraint of the system is transformed into an equivalent deterministic constraint, which avoids the multiple traversal operation of electromechanical system dynamic response. Combined with stochastic simulation, the discussion of the complex correlation between the limit state functions of each failure mode is avoided. The parameter sensitivity analysis of the electromechanical system is analyzed and the sample is simplified by means of orthogonal experimental design method (DOE). Then based on the random fault injection-neural network method, the influence of the critical sensitive characteristic parameters on the reliability of electromechanical system is obtained. The reliability interval and the critical value of failure are obtained, which provide a reference and basis for the reliability analysis and design of electromechanical system.

Key words: correlated failure modes, dynamic, random failure, reliability, artificial neural networks

郭姣姣, 刘伟, 翟玮昊, 税朗泉, 赵海龙. 随机故障注入结合神经网络法的机电系统可靠性计算方法^*[J]. 机械工程学报, 2017, 53(6): 195-202.

GUO Jiaojiao, LIU Wei, ZHAI Weihao, SHUI Langquan, ZHAO Hailong. Reliability Calculation Method of Electromechanical System Based on Random Fault Injection Combined with Artificial Neural Network[J]. Journal of Mechanical Engineering, 2017, 53(6): 195-202.

参考文献

[1] O’CONNOR P D T. Reliability-past，present，and future[J]. IEEE Trans on Reliability，2000，36：1-6.
[2] XIE L Y，ZHOU J Y，HAO C Z. System-level load-strength interference based reliability modeling of k-out-of-n system[J]. Reliability Engineering & System Safety，2004，84(3)：311-317.
[3] 郭建英，孙永全，于春雨，等. 复杂机电系统可靠性预测的若干理论与方法[J]. 机械工程学报，2014，50(14)：1-13.
GUO Jianying，SUN Yongquan，YU Chunyu，et al. Some theory and method for complex electromechanical system reliability prediction[J]. Journal of Mechanical Engineering，2014，50(14)：1-13.
[4] 谢里阳. 机械可靠性理论、方法及模型中若干问题评述[J]. 机械工程学报，2014，50(14)：27-35.
XIE Liyang. Issues and commentary on mechanical reliability theories，methods and models[J]. Journal of Mechanical Engineering，2014，50(14)：27-35.
[5] AVONTUUR G C，Van der WERFF K. Systems reliability analysis of mechanical and hydraulic drive systems[J]. Reliability Engineering and System Safety，2002，77：121-130.
[6] HARI P M，RAMI R G，SRIVIDYA A，et al. Applying mechanistic models to reliability evaluation of mechanical components-An illustration[J]. Annals of Nuclear Energy，2011，38：1447-1451.
[7] HALLOUZI R，VERHAEGEN M. Fault-tolerant subspace predictive control applied to a Boeing 747 model[J]. Journal of Guidance，Control，and Dynamics，2008，31(4)：873-883.
[8] ARUL A J，IYER N K，VELUSAMY K. Efficient reliability estimate of passive thermal hydraulic safety system with automatic differentiation[J]. Nuclear Engineering and Design，2010，2768-2778.
[9] BURGAZZI L. Thermal-hydraulic passive system reliability-based design approach[J]. Reliability Engineering and System Safety，2007，92：1250-1257.
[10] DENG J. Structural reliability analysis for implicit performance function using radial basis function network[J]. International Journal of Solids and Structures，2006，43(11-12)：3255-3291.
[11] DENG J，GU D，LI X，et al. Structural reliability analysis for implicit performance function using artificial neural network[J]. Structural Safety，2005，27(1)：25-48.
[12] CHENG J，LI Q S，XIAO R. A new artificial neural network-based response surface method for Structural reliability analysis[J]. Probabilistic Engineering Mechanics，2008，23(1)：51-63.
[13] 吕震宙，李璐祎，宋述芳，等. 不确定性结构系统的重要性分析理论与求解方法[M]. 北京：科学出版社，2015.
LÜ Zhenzhou，LI Luyi，SONG Shufang，et al. The important analysis theory and the solution method of the uncertainty structure system[M]. Beijing：Science Press，

2015.
[14] 宋述芳，吕震宙. 基于鞍点估计及其改进法的可靠性灵敏度分析[J]. 力学学报，2011，43(1)：162-168.
SONG Shufang，LÜ Zhenzhou. The reliability sensitivity analysis based on saddlepoint approximation and its improved method[J]. Journal of Mechanic，2011，43(1)：162-168.
[15] 张义民，朱丽莎，唐乐，等. 刚柔混合非线性转子系统的动态应力可靠性及可靠性灵敏度研究[J]. 机械工程学报，2011，47(2)：159-165.
ZHANG Yimin，ZHU Lisha，TANG Le，et al. Dynamical stress reliability and sensitivity analysis of nonlinear rotor system with rigid-flexible structure[J]. Journal of Mechanical Engineering，2011，47(2)：159-165.
[16] 张兴武，刘金鑫，陈雪峰，等. 基于神经网络的薄壳多目标振动优化控制研究[J]. 机械工程学报，2016，52(9)：56-64.
ZHANG Xingwu，LIU Jinxin，CHEN Xuefeng，et al. Neural network based multi-objective active vibration optimization method for shell structure[J]. Journal of Mechanical Engineering，2016，52(9)：56-64.
[17] 刘宇，李天翔，刘阔，等. 基于四阶矩法车削颤振可靠性研究[J]. 机械工程学报，2016，52(20)：193-200.
LIU Yu，LI Tianxiang，LIU Kuo，et al. Chatter reliability of turning processing system based on fourth moment method[J]. Journal of Mechanical Engineering，2016，52(20)：193-200.
[18] 郭姣姣，刘伟，余知朴，等. 基于虚拟故障注入的液压系统性能仿真与优化[J]. 中国机械工程，2015，26(9)：1221-1226.
GUO Jiaojiao，LIU Wei，YU Zhipu，et al. Simulation and optimization of the hydraulic system performance based on virtual fault injection[J]. China Mechanical Engineering，2015，26(9)：1221-1226.
[19] 李成功，和彦森. 液压系统建模与仿真分析[M]. 北京：航空工业出版社，2008.
LI Chenggong，HE Yansen. Modeling and Simulation of hydraulic system[M]. Beijing：Aviation Industry Press，2008.

随机故障注入结合神经网络法的机电系统可靠性计算方法^*

Reliability Calculation Method of Electromechanical System Based on Random Fault Injection Combined with Artificial Neural Network

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	郑杰, 权伟, 刘洋, 卢学民, 刘晓红, 岳雅楠, 周腾, 蔡振兵. Cr/Zr涂层环向压缩表面裂纹识别研究[J]. 机械工程学报, 2024, 60(8): 1-10.
[2]	孙悦, 牛文龙, 张麦仓. GH4151合金的热变形行为及动态再结晶研究[J]. 机械工程学报, 2024, 60(8): 143-153.
[3]	冯俊鑫, 赵振宙, 陈明, 江瑞芳, 王丁丁, 刘一格. 涡流发生器高度对风力机翼段动态失速过程的影响分析[J]. 机械工程学报, 2024, 60(8): 291-298.
[4]	刘占广, 张云, 刘晴雨. 基于差分融合长短期记忆神经网络数控机床热误差建模[J]. 机械工程学报, 2024, 60(7): 249-257.
[5]	狄子钧, 袁东风, 李东阳, 梁道君, 周晓天, 信苗苗, 曹凤, 雷腾飞. 基于多尺度-高效通道注意力网络的刀具故障诊断方法[J]. 机械工程学报, 2024, 60(6): 82-90.
[6]	王俊玖, 刘金玉, 侯秀娟, 齐振国, 李志敏, 刘涛. 列车车体柔性装配精度预测的力学-数据混合建模方法[J]. 机械工程学报, 2024, 60(6): 177-186.
[7]	李春凯, 王嘉昕, 石玗, 代悦. GTAW熔池激光条纹动态行为与熔透预测方法研究[J]. 机械工程学报, 2024, 60(6): 236-244.
[8]	俞水, 吴晓, 郭鹏, 王志华. 基于首次穿越PDF自适应估计的时变可靠性分析方法[J]. 机械工程学报, 2024, 60(5): 264-275.
[9]	赵星宇, 王波, 权龙, 葛磊, 周兴炜. 串联阀芯阀口独立控制多路阀设计及特性研究[J]. 机械工程学报, 2024, 60(4): 113-125.
[10]	周宁, 姚建勇, 邓文翔. 基于神经网络的比例伺服阀阀芯液动力补偿鲁棒智能控制[J]. 机械工程学报, 2024, 60(4): 126-133.
[11]	姚静, 杨帅, 殷航, 王运昌, 王文静, 丘铭军. 基于阀芯位移软测量的数字阀智能驱动方法研究[J]. 机械工程学报, 2024, 60(4): 155-166.
[12]	王丹丹, 黄伟迪, 张军辉, 赵守军, 于斌, 刘施镐, 吕飞, 苏琦, 徐兵. 基于边缘计算的轴向柱塞泵磨损状态辨识方法研究[J]. 机械工程学报, 2024, 60(4): 189-199.
[13]	李莹, 张嘉方, 张钊墉, 王鑫丞, 张晋, 孔祥东. 斜盘式轴向柱塞泵柱塞颈部最小直径设计[J]. 机械工程学报, 2024, 60(4): 430-437.
[14]	汪首坤, 许永康, 陈志华, 司金戈, 李斌, 王军政. 无人机移动自主回收着陆原理及控制方法[J]. 机械工程学报, 2024, 60(3): 34-46.
[15]	钱萍, 刘鑫雨, 陈文华, 王哲, 郭明达. 电连接器用聚氨酯胶密封件贮存可靠性建模[J]. 机械工程学报, 2024, 60(20): 361-371.