• CN:11-2187/TH
  • ISSN:0577-6686

›› 2014, Vol. 50 ›› Issue (19): 24-31.

• 论文 • 上一篇    下一篇

双套索耦合传动系统建模与分析

陈林;王兴松   

  1. 东南大学机械工程学院
  • 出版日期:2014-10-05 发布日期:2014-10-05

Modeling and Analysis of Tendon-sheath Transmission System in Pull-pull Configuration

CHEN Lin;WANG Xingsong   

  1. School of Mechanical Engineering, Southeast University
  • Online:2014-10-05 Published:2014-10-05

摘要: 双套索耦合传动是套索驱动机器人设计中比较常见的传动方式,由于传动过程中涉及两根绳索之间拉力的相互作用,其传动特性比单根套索传动更为复杂。在之前对单根绳索传动特性研究的基础上研究了双套索传动系统在各阶段的传动性质,推导出双套索耦合传动系统力矩和位移的传递模型。建立双套索耦合传动特性测量试验台,通过试验对力矩和位移的传递模型进行了验证。通过试验对影响双套索耦合传动系统特性的因素进行了分析,结果表明传递特性由套管的弯曲角度、绳索预紧力以及绳索和套管之间的摩擦决定,而绳索的运动速度和套管的弯曲半径对系统的传递特性几乎没有影响。

关键词: 套索耦合传动系统;类间隙;类磁滞;手术机器人

Abstract: Tendon-sheath transmission mechanism in pull-pull configuration is common in tendon-sheath actuated robotics. Its transmission characteristics are more complex than single-tendon-sheath transmission because the two tendons will interact with each other during the working process. The transmission characteristics in different phases are studied based on our previous results of single-tendon-sheath transmission system. The torque and displacement transmission models are deduced. An experimental setup for measuring the transmission characteristics is developed and the transmission models are verified by experimental data. Influencing factors related to transmission characteristics are studied by experiments, the results shows that the transmission characteristics are determined by the total sheath bending angle, tendon pretension and the friction level between sheath and tendon, rather than tendon velocity and sheath bending radii.

Key words: tendon-sheath transmission system in pull-pull configuration;backlash-like;hysteresis-like;surgical robot

中图分类号: