• CN:11-2187/TH
  • ISSN:0577-6686

›› 1999, Vol. 35 ›› Issue (4): 93-95.

• 论文 • 上一篇    下一篇

冷风切削加工对不锈钢加工表面的效果

陈德成;铃木康夫;加茂进   

  1. 日本国静冈大学大学院
  • 发布日期:1999-07-01

EFFECT OF CUTTING TECHNIQUE WITH COOLED AIR TO FINISHING SURFACE OF STAINLESS STEEL

Chen Decheng;Suzuki Yasuo;Kamo Susumi   

  1. Graduate School, Shizuoka University, Japan
  • Published:1999-07-01

摘要: 对采用冷风冷却微量植物油润滑切削加工不锈钢零件的方法进行了研究。试验结果表明,这种方法能延长刀具的使用寿命,能抑制积屑瘤的产生,提高加工表面精度,可省去废液和废液处理系统,有利于实现清洁生产模式和ISO14000的要求。

关键词: 不锈钢, 冷风, 切削加工, 超声相控阵, 两层介质, 全聚焦算法, 稀疏矩阵

Abstract: The method to machine the parts made of stainless steel which adopts cooled air as coolant and a little plant oil as lubricant, is studied. It has been shown that this method can retard the wear of the tool and prolong its service life; it can restrain the formation of the built-up-edge and improve the machining precision of the surfaces of the tooled parts; the disposal systems of both waste chips and liquid will be omitted, this will be beneficial to reduce processing cost, 'realize the production model without pollution and achieve the demand of IS014000.

Key words: Cutting Cooled air, Stainless steel, Sparse matrix, Total focusing method, Two-layer medium, Ultrasonic phased array

中图分类号: