• CN：11-2187/TH
  • ISSN：0577-6686
机械工程学报

›› 1997, Vol. 33 ›› Issue (1): 59-65，8.

• 论文 • 上一篇    下一篇

扫码分享

平面包络环面蜗杆基于坐标测量的高精度制造方法

秦大同;颜佳;张光辉   

  1. 重庆大学机械传动国家重点实验室
  • 发布日期:1997-01-01

METHOD TO MANUFACTURE PLANE-GENERATED HOURGLASS WORM WITH HIGH PRECISION BASED ON COORDINATE MEASUREMENTS

Qin Datong;Yan Jia;Zhang Guanghui   

  1. Chongqing University
  • Published:1997-01-01

摘要： 用坐标测量的方法实现了平面包络环面蜗杆齿形偏差的测量，提出了由齿形偏差的测量结果诊断蜗杆加工时机床工具的调整误差，并根据诊断结果修正机床工具的调整参数，从而提高蜗杆制造精度的方法，加工测量的试验表明本文方法十分有效。

关键词: 测量, 平面包络环面蜗杆, 修正, 制造误差

Abstract: The measurement of tooth-profile deviation of a plane-generated hourglass worm is achieved by coordinate measurement. The method to improve the manufacturing accuracy of worms by diagnosing the adjusting error of machine tools during worm machining from the results of tooth-profile deviation measurement and correcting the adjusting parameters of machine tools from diagnosis results is proposed. The experiments of machining and measurement indicate that this method is quite effective.

Key words: Manufacturing error, Measurement Correction, Plane-generated hourglass worm

中图分类号: 

版权所有 © 2019 《机械工程学报》编辑部 | 京ICP备05055788号-30