快速走丝切割机床多次切割工艺及其对表面质量的影响

›› 1992, Vol. 28 ›› Issue (2): 108-111.

扫码分享

快速走丝切割机床多次切割工艺及其对表面质量的影响

郭黎滨;张铭钧;薛开;李广君

哈尔滨船舶工程学院

发布日期:1992-03-01

THE MULTI-CUTTING TECHNOLOGICAL METHOD WITH WENDM-HS AND ITS INFLUENCE ON SURFACE QUALITY

Guo Libin;Zhang Mingjun;Xue Kai;Li Guangjun

Harbin Shipbuilding Engineering Institute

Published:1992-03-01

摘要/Abstract

摘要： 本文叙述了在国产快速走丝线切割机床上采用第一次电火花切割，第二次脉冲电解加工的工艺方法，使得工件的表面质量大为提高。讨论了具体的切割工艺并提出相应参数。

关键词: 电火花线切割机床, 电解线切割, 外观质量

Abstract: A technological method with WEDM-HS is discussed. That is first using wire spark-erosion cutting and second using pulse-electro-chemical machining. The results show that the surface quality of the machined workpieces were improved greatly. The relative technological parameters are also brought up.

Key words: 电火花线切割机床, 电解线切割, 外观质量

郭黎滨;张铭钧;薛开;李广君. 快速走丝切割机床多次切割工艺及其对表面质量的影响[J]. , 1992, 28(2): 108-111.

Guo Libin;Zhang Mingjun;Xue Kai;Li Guangjun. THE MULTI-CUTTING TECHNOLOGICAL METHOD WITH WENDM-HS AND ITS INFLUENCE ON SURFACE QUALITY[J]. , 1992, 28(2): 108-111.

[1]	贾志新;张宏斌;郗安民. 基于径向基函数神经网络的电火花线切割机床可靠性数据模拟生成[J]. , 2010, 46(2): 145-149.
[2]	赵庆志;刘正埙;谷安;朱荻. 电火花线切割机床可重构模块划分的理论和应用研究[J]. , 2005, 41(9): 175-179.

快速走丝切割机床多次切割工艺及其对表面质量的影响

THE MULTI-CUTTING TECHNOLOGICAL METHOD WITH WENDM-HS AND ITS INFLUENCE ON SURFACE QUALITY

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价