• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2026, Vol. 62 ›› Issue (17): 443-452.doi: 10.3901/JME.260918

• 制造工艺与装备 • 上一篇    

扫码分享

激光粉末床熔融结合熔渗工艺制备18Ni300/Cu双金属复合材料

张家诚1,2, 孔玉1,2, 彭开元1,2, 刘志峰1,2, 黄海鸿1,2   

  1. 1. 合肥工业大学机械工程学院 合肥 230009;
    2. 机电产品低碳循环利用技术与装备安徽省重点实验室 合肥 230009
  • 收稿日期:2025-09-12 修回日期:2026-03-05 发布日期:2026-11-20
  • 作者简介:张家诚,男,1996年出生,博士研究生。主要研究方向为激光增材制造。E-mail:zjc0233@mail.hfut.edu.cn;黄海鸿(通信作者),男,1980年出生,博士,教授,博士研究生导师。主要研究方向为绿色制造、再制造与回收再资源化等。E-mail:huanghaihong@hfut.edu.cn
  • 基金资助:
    国家自然科学基金青年基金(52305531)资助项目。

Fabrication of 18Ni300/Cu Bimetallic Composite Material by Laser Powder Bed Fusion Combined with Infiltration Process

ZHANG Jiacheng1,2, KONG Yu1,2, PENG Kaiyuan1,2, LIU Zhifeng1,2, HUANG Haihong1,2   

  1. 1. School of Mechanical Engineering, Hefei University of Technology, Hefei 230009;
    2. Anhui Province Key Laboratory of Low Carbon Recycling Technology and Equipment for Mechanical and Electrical Products, Hefei 230009
  • Received:2025-09-12 Revised:2026-03-05 Published:2026-11-20

摘要: 对于铜/钢双金属复合材料,传统的制造工艺受限于结构调控能力,难以协同优化铜的高导热性与钢的高强度等力学性能。为此,本研究采用激光粉末床熔融结合熔渗的新工艺制备了具有互穿特点的新型18Ni300/Cu双金属复合材料,并对其微观组织、力学性能、导热性能和耐磨性能进行了详细研究。实验结果表明:18Ni300/Cu双金属复合材料在异质界面处形成了良好的冶金结合,并展现出独特的裂纹自修复能力。在室温下,18Ni300/Cu双金属复合材料的屈服强度为402.7 MPa,摩擦系数为0.47,相较于纯铜,屈服强度提升了104.2%,摩擦系数降低了19.0%。此外,该材料还具有优异的热传导特性,导热系数高达227.1 W/(m·K)。实验分析表明:界面机械互锁特征和背应力强化机制使18Ni300/Cu双金属复合材料的强度超过了混合规则计算的预测值。磨粒磨损过程中产生的破碎颗粒在接触界面形成类润滑层,有效抑制了粘着磨损。互穿结构则通过构建连续导热网络,使导热增强效率明显提升。探讨了18Ni300/Cu双金属复合材料在模具工业中的潜在应用,提出了一种具有经济效益的新型热冲压模具设计方案。

关键词: 激光粉末床熔融, 熔渗, 双金属复合材料, 机械性能, 导热系数

Abstract: For copper-steel bimetallic composites, traditional manufacturing processes are limited by structural control capabilities, making it difficult to simultaneously optimize the high thermal conductivity of copper and the high strength of steel. Therefore, this study adopted a novel process combining laser powder bed melting with infiltration to fabricate an 18Ni300/Cu bimetallic composite material with interpenetrating characteristics, followed by a comprehensive investigation of its microstructure, mechanical properties, thermal conductivity, and wear resistance. Experimental results show that the 18Ni300/Cu bimetallic composite forms a good metallurgical bond at the heterogeneous interface and exhibits a unique crack self-healing ability. At room temperature, the yield strength of the 18Ni300/Cu bimetallic composite is 402.7 MPa, and the friction coefficient is 0.47. Compared with pure copper, the yield strength of the composite increases by 104.2%, and the friction coefficient decreases by 19.0%. Additionally, the material exhibits excellent thermal conductivity, with a measured value of 227.1 W/(m·K). Experimental analysis indicates that the interface mechanical interlocking features and back stress strengthening mechanisms result in a strength that exceeds the theoretical value predicted by the rule of mixtures. During abrasive wear, fragmented particles generated at the contact interface form a lubricating-like layer, effectively suppressing adhesive wear. The interpenetrating structure markedly enhances thermal conductivity by constructing a continuous thermal conduction network. The potential application of 18Ni300/Cu bimetallic composite material in the mold industry was explored, and a cost-effective new design for a hot stamping die was proposed.

Key words: laser powder bed fusion, infiltration, bimetallic composite material, mechanical properties, thermal conductivity

中图分类号: