• CN:11-2187/TH
  • ISSN:0577-6686

机械工程学报 ›› 2026, Vol. 62 ›› Issue (18): 411-424.doi: 10.3901/JME.260489

• 运载工程 • 上一篇    

扫码分享

基于热-机耦合模型的重载轮胎三向力估计温度修正算法

刘志浩, 冯皓然, 刘秀钰, 高钦和, 马超群   

  1. 火箭军工程大学导弹工程学院 西安 710025
  • 收稿日期:2026-02-15 修回日期:2026-07-15 发布日期:2026-11-20
  • 作者简介:刘志浩,男,1989年出生,博士,教授,博士研究生导师。主要研究方向为轮胎动力学与智能化、机电系统智能控制方法。E-mail:liuzh_epgc@163.com;冯皓然,男,2001年出生,硕士研究生。主要研究方向为智能轮胎信息感知,车辆悬架控制。E-mail:fhaoran2001@163.com;刘秀钰,男,1994年出生,讲师。主要研究方向为车辆运动规划与控制。E-mail:liuxiuyu1994@163.com;高钦和,男,1967年出生,博士,教授,博士研究生导师。主要研究方向为机电系统动态建模与控制方法。E-mail:gaoqinh1@163.com;马超群,男,1999年出生,硕士。主要研究方向为智能轮胎信息感知。E-mail:machaoq_0110@163.com
  • 基金资助:
    国家自然科学基金(52472464)、陕西省青年科技新星(2025ZC-KJXX-84)和陕西省“三秦英才特殊支持计划”资助项目。

Temperature Correction Estimation Algorithm for Three-axis Force of Heavy-duty Tire Based on Thermo-mechanical Coupling Model

LIU Zhihao, FENG Haoran, LIU Xiuyu, GAO Qinhe, MA Chaoqun   

  1. Missile Engineering College, Rocket Force Engineering University, Xi'an 710025
  • Received:2026-02-15 Revised:2026-07-15 Published:2026-11-20

摘要: 针对轮胎滚动过程中因温度升高产生的轮胎力估计偏差问题,开展基于热-机耦合模型的重载轮胎三向力温度修正估计算法。建立了考虑热-机耦合效应的重载轮胎有限元模型,并对模型进行了一致性校验。探究了变温度、单一工况及复合工况下轮胎胎面外变形特性、接地特性及力学特性,分析了轮胎接地三向力温度敏感性,进而实现了重载轮胎三向接地力估计。为提高估计的稳定性与适用性,进一步构建敏感特征值的线性温度修正关系,并结合多工况仿真训练高斯过程回归模型,使温度变化引起的特征偏移得到有效补偿。结果表明:接地力温度修正估计模型通过校正因温度变化引起的胎体信号偏移,优化模型输入的系统性误差,相比于未修正模型,垂向力估计精度提高了6.38%,纵向力估计精度提高了12.16%,侧向力估计精度提高了4.6%,验证了所提出方法的有效性。

关键词: 热-机耦合, 有限元模型, 重载轮胎, 接地力估计, 温度修正

Abstract: To address the tire force estimation bias caused by temperature rise during the rolling process, a temperature-compensated estimation algorithm for the three-directional forces of heavy-duty tires is developed based on a thermo-mechanical coupled model. A finite element model of heavy-duty tires considering thermo-mechanical coupling effects is established and validated for consistency. The deformation characteristics of the tire tread exterior, contact characteristics, and mechanical properties under variable-temperature conditions, as well as under single and combined working conditions, are investigated. The temperature sensitivity of the three-directional tire-ground interaction forces is analyzed, enabling the estimation of heavy-duty tire forces in all three directions. To enhance estimation stability and applicability, a linear temperature-correction relationship for sensitive feature variables is further constructed, and a Gaussian process regression model is trained using multi-condition simulations to effectively compensate for feature drift induced by temperature variations. The results show that the proposed temperature-corrected tire-ground force estimation model mitigates structural signal shifts caused by temperature changes and reduces systematic errors in the model inputs. Compared with the uncorrected model, the estimation accuracy is improved by 6.38% for vertical force, 12.16% for longitudinal force, and 4.6% for lateral force, demonstrating the effectiveness of the proposed approach.

Key words: thermo-mechanical coupling, finite element model, heavy-duty tire, ground contact force estimation, temperature correction

中图分类号: