汽车用金属板材的材料动态响应与断裂性能研究

doi:10.3901/JME.2022.20.339

机械工程学报 ›› 2022, Vol. 58 ›› Issue (20): 339-349.doi: 10.3901/JME.2022.20.339

扫码分享

汽车用金属板材的材料动态响应与断裂性能研究

周佳, 梁宾, 万鑫铭, 高翔, 方刚, 姜子涵

中国汽车工程研究院股份有限公司重庆 401122

收稿日期:2020-12-21 修回日期:2021-12-05 出版日期:2022-10-20 发布日期:2022-12-27
通讯作者: 万鑫铭(通信作者)，男，1978年出生，博士，教授级高级工程师。主要研究方向为汽车轻量化与安全技术。E-mail：wanxinming@caeri.com.cn
作者简介:周佳，男，1982年出生，博士，教授级高级工程师。主要研究方向为汽车轻量化技术及测评。E-mail：zhoujia@caeri.com.cn
基金资助:
国家重点研发计划(2016YFB0101607)和国家自然科学/中国汽车产业创新发展联合基金(U1764252)资助项目。

Research on Dynamic Response and Fracture Properties of Metal Materials for Vehicle

ZHOU Jia, LIANG Bin, WAN Xinming, GAO Xiang, FANG Gang, JIANG Zihan

China Automotive Engineering Research Institute Co., Ltd., Chongqing 401122

Received:2020-12-21 Revised:2021-12-05 Online:2022-10-20 Published:2022-12-27

摘要/Abstract

摘要： 随着环保意识与能源危机加速的影响，汽车轻量化技术得以发展，但仍需以保证汽车被动安全性能为前提。基于汽车碰撞过程的高应变速率和大变形特点，针对于汽车安全构件用材，详细介绍了多应变速率下的拉伸试验、断裂试验和零部件试验。结合仿真分析技术，以汽车用金属板材为对象，从力学性能及断裂性能两方面，对汽车碰撞过程中的材料动态响应及断裂行为进行表征，完整地介绍金属材料断裂模型的建立及应用过程，为汽车碰撞安全领域精准材料模型的建立提供参考。以目前广泛用于安全构建的热成形材料为例，通过上述试验获得材料在不同状态的力学性能数据，通过数据处理及仿真分析，建立动态材料断裂失效分析模型，并用于实际零件的失效仿真模拟，准确预测了零件的断裂行为，验证了本方法的适用性。

关键词: 动态变形, 材料力学, 本构模型, 断裂模型

Abstract: With the impact of environmental protection awareness and the accelerated energy crisis, automotive lightweight technology has been developed rapidly. However, it is necessary to ensure the passive safety performance of automobiles in the lightweight process. In this paper, the tensile tests under different strain rates, fracture tests and automotive safety component test are introduced in details on the basis of the dynamic strain response and large deformation characteristics of the automobile in collision process. The metallic alloy sheets are adopted and their dynamic response and fracture behavior are summarized from the aspects of mechanical properties and fracture performance. The establishment and application process of the fracture model of metal materials are fully presented in the paper and provides a reference for the establishment of accurate material model in the field of vehicle collision safety. Taking the press forming material which has been widely used in safety components as an example, the mechanical properties of the material in different states are obtained through the above-mentioned tests. Through data processing and simulation analysis, the dynamic material fracture model is established and used in the failure simulation of actual parts. The result indicate the mode is practical and can accurately predict the fracture behavior of parts.

Key words: dynamic deformation, material mechanics, constitutive mode, fracture mode

中图分类号:

TB31

周佳, 梁宾, 万鑫铭, 高翔, 方刚, 姜子涵. 汽车用金属板材的材料动态响应与断裂性能研究[J]. 机械工程学报, 2022, 58(20): 339-349.

ZHOU Jia, LIANG Bin, WAN Xinming, GAO Xiang, FANG Gang, JIANG Zihan. Research on Dynamic Response and Fracture Properties of Metal Materials for Vehicle[J]. Journal of Mechanical Engineering, 2022, 58(20): 339-349.

参考文献

[1] 马鸣图，易红亮，路洪洲，等. 论汽车轻量化[J]. 中国工程科学，2009，11(9):20-27. MA Mingtu，YI Hongliang，LU Hongzhou，et al. On the lightweight of automobiles[J]. Chinese Engineering Science，2009，11(9):20-27.
[2] 李桂华，熊飞，龙江启. 车身材料轻量化及其新技术的应用[J]. 材料开发与应用，2009，24(2):87-93. LI Guihua，XIONG Fei，LONG Jiangqi. Lightweight body materials and the application of new technologies[J]. Material Development and Application，2009，24(2):87-93.
[3] 范军锋. 现代轿车轻量化技术研究-新材料技术、轻量化工艺和轻量化结构[J]. 汽车工艺与材料，2009(2):10-14. FAN Junfeng. Research on the lightweight technology of modern cars-new material technology，lightweight technology and lightweight structure[J]. Automobile Technology and Materials，2009(2):10-14.
[4] 彭斐. 轻量化材料驱动汽车未来[J]. 汽车与配件，2014(10):43-45. PENG Fei. Lightweight materials drive the future of automobiles[J]. Auto Parts，2014(10):43-45.
[5] 闫海涛，张文超，张桂贤. 车辆碰撞过程中金属材料应变率范围分析[J]. 汽车工程师，2018(8):44-46. YAN Haitao，ZHANG Wenchao，ZHANG Guixian. Analysis of the strain rate range of metallic materials during vehicle collision[J]. Automotive Engineer，2018(8):44-46.
[6] BAO Y，WIERZBICKI T. On fracture locus in the equivalent strain and stress triaxiality space[J]. International Journal of Mechanical Sciences，2004，46(1):81-98.
[7] BAI Y，BAP Y，WIERZBICKI T. Fracture of prismatic aluminum tubes under reverse straining[J]. International Journal of Impact Engineering，2006，32(5):671-701.
[8] KHAN A S，LIU H. A new approach for ductile fracture prediction on Al 2024-T351 alloy[J]. International Journal of Plasticity，2012，35:1-12.
[9] BJORKLUND O，LARSSON R，NILSSON L. Failure of high strength steel sheets experiments and modelling[J]. Journal of Materials Processing Technology，2013，213(7):1103-1117.
[10] MALCHER L，PIRES F M A，SA J M，et al. An extended GTN model for ductile fracture under high and low stress triaxiality[J]. International Journal of Plasticity，2014，54(2):193-228.
[11] LI H，FU M W，LU J，et al. Ductile fracture:Experiments and computations[J]. International Journal of Plasticity，2011，27(2):147-180.
[12] JOHNSON G R，COOK W H. Fracture characteristics of three metals subjected to various strains，strain rates，temperatures，and pressures[J]. Engineering Fracture Mechanics，1985，21(1):31-48.
[13] EFFELSBERG J，HAUFE A，FEUCHT M，et al. On parameter identification for the Gissmo damage model[C]//Proceedings of the 12th International LS-DYNA Users Conference，Dearborn，USA. 2012:1-10.
[14] 曾龙. 高强钢点焊接头失效行为及仿真模型研究[D]. 北京:清华大学，2011. ZENG Long. Research on failure behavior and simulation model of high-strength steel spot welded joints[D]. Beijing:Tsinghua University，2011.
[15] 王蕾. Q345建筑钢材应力型断裂模型参数标定与应用[J]. 四川建材，2019，45(6):62-64. WANG Lei. Parameter calibration and application of Q345 construction steel stress fracture model[J]. Sichuan Building Materials，2019，45(6):62-64.
[16] 王蕾. S690QL高强度钢材在不同应力状态下的断裂破坏研究[J]. 机械工程师，2019(8):100-102. WANG Lei. Research on the fracture failure of S690QL high-strength steel under different stress states[J]. Mechanical Engineer，2019(8):100-102.
[17] 崔戈. 基于应力三轴度修正的Q345钢J-C失效模型参数研究[J]. 中国水运，2017，17(12):128-130. CUI Ge. Research on Q345 steel J-C failure model parameters based on stress triaxiality correction[J]. China Water Transport，2017，17(12):128-130.
[18] 穆磊. 面向先进高强钢的韧性断裂预测模型研究与应用[D]. 北京:北京科技大学，2018. MU Lei. Research and application of ductile fracture prediction model for advanced high-strength steel[D]. Beijing:University of Science and Technology Beijing，2018.
[19] HOCKETT J E，SHERBY O D. Large strain deformation of polycrystalline metals at low homologous temperatures[J]. Journal of the Mechanics and Physics of Solids，1975，23:87-98.
[20] GAVRUS A. Constitutive equation for description of metallic materials behavior during static and dynamic loadings taking into account important gradients of plastic deformation[J]. Key Engineering Materials，2012，504-506:697-702.
[21] GAVRUS A，BANU M，RAGNEAU E，et al. An inverse analysis approach of the erichsen test starting from a finite element model[J]. International Journal of Material Forming，2008(1):5-8.
[22] YAMAZAKI K，HAN J. Maximization of the crushing energy absorption of cylindrical shells[J]. Advance in Engineering Software，2000，31:425-434.
[23] 周琳. 金属材料新的动态本构模型[D]. 合肥:中国科学技术大学，2019. ZHOU Lin. A new dynamic constitutive model for metallic materials[D]. Hefei:University of Science and Technology of China，2019.
[24] KHAN A S，LIU H. A new approach for ductile fracture prediction on Al 2024-T351 alloy[J]. International Journal of Plasticity，2012，35:1-12.
[25] BJORKLUND O，LARSSON R，NILSSON L. Failure of high strength steel sheets Experiments and modelling[J]. Journal of Materials Processing Tech.，2013，213(7):1103-1117.

汽车用金属板材的材料动态响应与断裂性能研究

Research on Dynamic Response and Fracture Properties of Metal Materials for Vehicle

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	任忠凯, 李赫, 许雅楠, 程前, 冯浩, 王涛. 脉冲电场辅助碳素钢极薄带拉伸变形的本构模型和微观组织演变[J]. 机械工程学报, 2024, 60(6): 245-260.
[2]	徐腾, 邓春阳, 冉家琪, 龚峰, 唐恒. 金属的应变率效应及其动态本构研究进展[J]. 机械工程学报, 2024, 60(2): 81-98.
[3]	王刚, 谷诤巍, 于歌, 李欣. 热成形工艺条件下7075-H18铝合金板材塑性流动行为的本构建模[J]. 机械工程学报, 2024, 60(2): 188-196.
[4]	程吉, 曹宏东, 屈蜀光, 郑凯伦, 何祝斌. 基于黏塑性本构的6061铝合金管热气胀成形工艺参量建模研究[J]. 机械工程学报, 2024, 60(16): 108-117.
[5]	贺炜林, 孟宝, 万敏. GH4169合金超薄带材U形弯曲回弹行为研究[J]. 机械工程学报, 2024, 60(14): 174-184.
[6]	柯育智, 袁伟, 张少鹏, 周飞鲲, 鲁亮, 汤勇. 燃料电池质子交换膜表面微结构热压工艺热力耦合特性研究[J]. 机械工程学报, 2024, 60(14): 317-328.
[7]	陈睿, 程诗敏, 温仕成, 赵子衡, 彭锐涛, 胡聪芳, 肖湘武. 基于J-C模型修正的7150-T6航空铝合金薄壁开孔圆管结构优化[J]. 机械工程学报, 2024, 60(11): 95-104.
[8]	李伟, 周志军, 温泽峰, 姚学东, 赵鑫. 轮轨非稳态载荷下钢轨疲劳裂纹萌生分析[J]. 机械工程学报, 2023, 59(18): 283-293.
[9]	周煜, 范志超, 姜恒, 王宇轩. 改进Logistic蠕变应变预测模型及其有限元实现[J]. 机械工程学报, 2023, 59(16): 82-89.
[10]	田国富, 赵瑞祥, 于灏, 王婷. 肌腱的生物力学模型构建与试验分析[J]. 机械工程学报, 2023, 59(10): 96-105.
[11]	方进秀, 张兴权, 王会廷, 谢玲玲. 5052铝合金的动态拉伸性能及其本构模型[J]. 机械工程学报, 2022, 58(8): 160-169.
[12]	李勇, 石朱生, 吕凤工, 荣琦, 李东升, 林建国. 基于热激活变形理论的铝合金弹塑性应力松驰机理与建模[J]. 机械工程学报, 2022, 58(6): 42-51.
[13]	穆振凯, 赵军, 于高潮, 黄学颖, 孙红磊. 金属薄板厚向异性系数R值的确定方法及其在后继屈服中的演化[J]. 机械工程学报, 2022, 58(6): 91-100.
[14]	陈源, 李淑慧, 李永丰, 林忠钦. TA15钛合金应力松弛行为宏微耦合本构建模[J]. 机械工程学报, 2022, 58(12): 64-74.
[15]	庄蔚敏, 王恩铭. 胞孔孔径对泡沫铝压缩力学性能影响的仿真研究[J]. 机械工程学报, 2022, 58(12): 75-82,92.