磁性液体密封新结构及耐压性能理论研究

doi:10.3901/JME.2022.03.213

机械工程学报 ›› 2022, Vol. 58 ›› Issue (3): 213-220.doi: 10.3901/JME.2022.03.213

扫码分享

磁性液体密封新结构及耐压性能理论研究

袁芳¹, 王四棋¹, 李德才^1,2, 陈铎¹, 邸楠楠¹, 李文怡¹

1. 北京交通大学机械电子与控制工程学院北京 100044;
2. 清华大学摩擦学重点实验室北京 100084

收稿日期:2021-02-16 修回日期:2021-09-18 出版日期:2022-02-05 发布日期:2022-03-19
通讯作者: 王四棋(通信作者),男,1980年出生,博士,副教授。主要研究方向为磁液应用技术。E-mail:sqwang@bjtu.edu.cn
作者简介:袁芳,女,1997年出生。主要研究方向为电液磁一体化的理论及应用。E-mail:19121312@bjtu.edu.cn;李德才,男,1965年出生,教授,博士研究生导师。主要研究方向为电液磁一体化的理论及应用。E-mail:lidecai@mail.tsinghua.edu.cn
基金资助:
中央高校基本科研业务费专项资金（2019JBM054）和北京市自然科学基金（3182013）资助项目。

Theoretical Research on the Novel Magnetic Fluid Seal Structure and Its Pressure Resistance

YUAN Fang¹, WANG Siqi¹, LI Decai^1,2, CHEN Duo¹, DI Nannan¹, LI Wenyi¹

1. School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044;
2. State Key Laboratory of Tribology, Tsinghua University, Beijing 100084

Received:2021-02-16 Revised:2021-09-18 Online:2022-02-05 Published:2022-03-19

摘要/Abstract

摘要： 对于某特定大尺寸主轴重型装备，主轴在高线速度运转中会出现一定的径向摆动，导致密封泄漏问题。传统单一轴向磁性液体密封结构未能满足该设备出现径向摆动时的耐压要求，为了解决这一问题，并考虑到机械设备的主轴密封结构的轴向空间受到一定限制，提出一种新型轴向径向串联磁性液体密封结构。理论研究磁路中轴向和径向磁性液体串联密封结构的耐压性能，并利用有限元对该密封结构的密封间隙内的磁场强度进行数值模拟，根据磁性液体密封耐压理论计算出密封间隙内的理论耐压值，分析主轴径向摆动位移量对轴向、径向和系统整体密封性能的影响。结果表明，针对文中设定的密封结构，随着径向摆动位移量的增大，轴向密封处并联磁阻增大，其理论耐压值减小，径向密封处并联磁阻减小，其理论耐压值增大。在轴向和径向密封两者串联作用下，系统整体的耐压能力保持在一定范围内波动，可有效提升高速旋转轴动密封的耐压稳定性。

关键词: 磁性液体, 密封, 径向摆动, 磁场强度

Abstract: For a certain large-size main shaft and heavy equipment, the spindle will have a certain radial swing during high linear speed operation, which will cause seal leakage. The traditional single axial magnetic liquid sealing structure fails to meet the pressure requirements of the equipment when radial swing occurs. In order to solve this problem, and considering that the axial space of the main shaft sealing structure of the mechanical equipment is limited, a novel shaft-diameter-bidirectional magnetic fluid seal structure is proposed. The pressure resistance of the axial and radial magnetic liquid series seal structure in the single magnetic source magnetic circuit is theoretically studied, and the finite element simulation is used to numerically simulate the magnetic field strength in the seal gap of the seal structure. According to the pressure resistance theory of the magnetic fluid seal, the theoretical pressure resistance value in the sealing gap is calculated, and the influence of spindle radial runout displacement on the axial, radial and overall sealing performance of the system is analyzed. The research results show that for the sealing structure set in the article, as the radial swing displacement increases, the parallel magnetic resistance at the axial seal increases, and its theoretical pressure resistance value of the axial seal decreases. The parallel magnetic resistance at the radial seal decreases, and its theoretical pressure resistance value of the radial seal increases. Under the series action of both axial and radial seals, the overall pressure capability of the system remains within a certain range, which can effectively improve the pressure stability of the high-speed rotating shaft dynamic seal.

Key words: magnetic fluid, sealing, radial swing, magnetic field strength

中图分类号:

TB42

袁芳, 王四棋, 李德才, 陈铎, 邸楠楠, 李文怡. 磁性液体密封新结构及耐压性能理论研究[J]. 机械工程学报, 2022, 58(3): 213-220.

YUAN Fang, WANG Siqi, LI Decai, CHEN Duo, DI Nannan, LI Wenyi. Theoretical Research on the Novel Magnetic Fluid Seal Structure and Its Pressure Resistance[J]. Journal of Mechanical Engineering, 2022, 58(3): 213-220.

参考文献

[1] 林小凤. 航空发动机机械系统技术分析[J]. 内燃机与配件,2019,294(18):51-52. LIN Xiaofeng. Technical analysis of aero-engine mechanical system[J]. Internal Combustion Engines & Parts,2019,294(18):51-52.
[2] 王晓勤. 浅谈我国密封行业的发展现状和前景[J]. 科技创新与应用,2013,70(30):123-123. WANG Xiaoqin. Talking about the development status and prospects of my country's sealing industry[J]. Science & Technology Innovation and Application,2013,70(30):123-123.
[3] 李德才. 磁性液体密封理论及应用[M]. 北京:科学出版社,2010. LI Decai. Theory and application of magnetic liquid sealing[M]. Beijing:Science Press,2010.
[4] OCHONSKI W. Dynamic sealing with magnetic fluids[J]. Wear,1989,130(1):261-268.
[5] 夏丽英. 高速分散机主轴磁流体密封机理的研究[J]. 机械工程师,2005(2):84-86. XIA Liying. Research on the magnetic fluid sealing mechanism of the high-speed disperser spindle[J]. Mechanical Engineer,2005(2):84-86.
[6] 彭旭东,王玉明,黄兴. 密封技术的现状与发展趋势[J]. 液压气动与密封,2009(4):4-11. PENG Xudong,WANG Yuming,HUANG Xing. The status quo and development trend of sealing technology[J]. Hydropneumatics & Sealing,2009(4):4-11.
[7] 王虎军,李德才,甄少波,等. 磁流体对气体和液体耐压能力的对比研究[J]. 食品与机械,2016,32(11):68-70,101. WANG Hujun,LI Decai,ZHEN Shaobo,et al. Comparative study on the pressure resistance capability of magnetic fluid to gas and liquid[J]. FOOD & MACHINERY,2016,32(11):68-70,101.
[8] 李保锋,刘颖,余智勇. 磁性流体动密封失效机理分析[J]. 液压与气动,2004(6):83-85. LI Baofeng,LIU Ying,YU Zhiyong. Analysis of failure mechanism of magnetic fluid dynamic seal[J]. Hydraulics & Pneumatics,2004(6):83-85.
[9] 杨逢瑜,王顺,娄磊,等. 高速大长径比搅拌轴微纳米磁流体密封性能研究[J]. 液压与气动,2009,211(3):63-65. YANG Fengyu,WANG Shun,LOU Lei,et al. Research on micro/nano magnetic fluid seal performance of high speed and large length-to-diameter ratio stirring shaft[J]. Hydraulics & Pneumatics,2009,211(3):63-65.
[10] 何新智,苗玉宾,王礼,等. 磁性液体密封液体技术的进展简述[J]. 真空科学与技术学报,2019,39(5):361-366. HE Xinzhi,MIAO Yubin,WANG Li,et al. Brief introduction to the progress of magnetic liquid sealing liquid technology[J]. Journal of Vacuum Science and Technology,2019,39(5):361-366.
[11] 池长青,王之珊,赵丕智. 铁磁流体力学[M]. 北京:北京航空航天大学出版社,1993. CHI Changqing,WANG Zhishan,ZHAO Pizhi. Ferrohydrodynamics[M]. Beijing:Beijing University of Aeronautics and Astronautics Press,1993.
[12] 张惠涛,李德才. 分瓣式密封装置磁性液体平面密封研究[J]. 机械工程学报,2018,54(5):149-155. ZHANG Huitao,LI Decai. Research on magnetic liquid plane seal of split seal device[J]. Journal of Mechanical Engineering,2018,54(5):149-155.
[13] 顾红,徐伟华,宋鹏云,等. 磁流体密封水介质的自修复研究[J]. 摩擦学学报,2002(3):214-217. GU Hong,XU Weihua,SONG Pengyun,et al. Research on self-healing of magnetic fluid sealing water medium[J]. Tribology,2002(3):214-217.
[14] 刘颖,王全胜,王建华,等. 磁流体密封自修复的试验研究[J]. 摩擦学学报,1998(3):3-5. LIU Ying,WANG Quansheng,WANG Jianhua,et al. Experimental research on self-repair of magnetic fluid seal[J]. Tribology,1998(3):3-5.
[15] 杨小龙,李德才,何新智,等. 大间隙磁性液体与迷宫交替式组合密封的数值及试验研究[J]. 机械工程学报,2014,50(20):175-179. YANG Xiaolong,LI Decai,HE Xinzhi,et al. Numerical and experimental research on large-gap magnetic liquid and labyrinth alternate combination seal[J]. Journal of Mechanical Engineering,2014,50(20):175-179.

磁性液体密封新结构及耐压性能理论研究

Theoretical Research on the Novel Magnetic Fluid Seal Structure and Its Pressure Resistance

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王优强, 徐莹, 莫君, 何彦, 赵涛, 倪陈兵. 磁场作用下水基磁流体对TC4与Si₃N₄摩擦学性能影响的实验研究[J]. 机械工程学报, 2024, 60(7): 174-183.
[2]	纪佳馨, 彭程, 项冲, 黄乐, 郭飞. 考虑变速条件的斯特封磨损寿命预测方法[J]. 机械工程学报, 2024, 60(3): 191-202.
[3]	曾少昔, 赵春田, 李红梅. 铁磁材料漏磁信号对拉伸应力的响应研究[J]. 机械工程学报, 2024, 60(20): 68-76.
[4]	钱萍, 刘鑫雨, 陈文华, 王哲, 郭明达. 电连接器用聚氨酯胶密封件贮存可靠性建模[J]. 机械工程学报, 2024, 60(20): 361-371.
[5]	刘跃, 黄民, 李永健, 安琪, 蒋杰. 大压差下热塑性迷宫密封泄漏特性研究[J]. 机械工程学报, 2024, 60(15): 194-204.
[6]	王娟, 刘美红, 祝世兴, 陈文博, 李遇贤, 孙军锋. 指尖密封结构参数的多目标混合教与学优化方法[J]. 机械工程学报, 2023, 59(9): 157-170.
[7]	胡琼, 肖洋, 卢迪, 曹志康, 王晓雷, 王衍, 武扬, 何一鸣. 微流道界面剪切对液膜密封空化流场特性的影响研究[J]. 机械工程学报, 2023, 59(9): 171-185.
[8]	雷俊杰, 刘美红, HU Xiangping, 王娟, 王学良. 基于分形理论的椭圆弧型指尖密封磨损特性分析[J]. 机械工程学报, 2023, 59(3): 144-157.
[9]	王衍, 谢雪非, 徐慧, 黄周鑫, 何一鸣, 杨怀石, 胡琼. 新型非接触式自冲击密封结构设计与性能分析[J]. 机械工程学报, 2023, 59(15): 204-215.
[10]	王祺德, 刘达新, 刘振宇, 谭建荣. 基于复合泄漏通道模型的O型圈密封泄漏率计算方法研究[J]. 机械工程学报, 2023, 59(11): 232-241.
[11]	张彤, 李德才, 李艳文. 磁性液体密封与迷宫密封组合密封的结构设计及优化[J]. 机械工程学报, 2022, 58(9): 172-181.
[12]	崔颖, 于颖嘉, 张宏翔, 钟兢军. 基于多孔介质理论的双粗糙面金属静密封泄漏模型[J]. 机械工程学报, 2022, 58(21): 215-224.
[13]	马学忠, 孟祥铠. 瑞利台阶型机械密封端面环形槽的空化诱导机理分析[J]. 机械工程学报, 2022, 58(13): 166-174.
[14]	王建磊, 门川皓, 赵伟刚, 贾谦, 崔亚辉, 张琛, 袁小阳. 动静压机械密封的结构设计及端面槽型优化研究[J]. 机械工程学报, 2021, 57(9): 108-117.
[15]	尹源, 黄伟峰, 刘向锋, 刘莹, 王玉明, 李鲲. 机械密封智能化的技术基础和发展趋势[J]. 机械工程学报, 2021, 57(3): 116-128.